Availability
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 25 )
$1,249.95
—
$1,499.95
The Street Warrior uses the latest technology and quality products that Holley is known for. Constructed from aluminum, the Street Warrior is a great replacement carburetor for your daily driver or your weekend cruiser. Perfect replacement carburetor when your original style is no longer available.
( 402 )
$480.95
—
$499.95
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 23 )
$1,649.95
—
$1,899.95
Help your fuel injection system keep up on measured pressures with these Holley replacement pressure transducers. They include a wiring pigtail, are available for all Holley EFI fuel injection systems, and come in different pressure ranges to suit your engine application requirements.
( 48 )
$149.95
—
$212.95
Replace your old carburetor with original Holley performance 4160 carburetors. Budget-minded enthusiasts, like you, will be rewarded with maximum performance from your stock or mildly-modified engine. These Holley 4160 carburetors are easier to tune than full race carburetors with temperamental secondary metering blocks and dual pumps. Plus, they're available in your choice of universal or direct-fit OE replacement versions with all emission provisions. Bolt-on installation and improved performance; no wonder when car guys think of carburetors, they think of Holley 4160 carburetors!
( 258 )
$524.95
—
$849.95
Holley Model 4150 aluminum Double Pumper carburetors offer an improved fuel design and efficient construction features for huge 38 percent weight savings over standard carbs. Optimized for street and strip calibration, they provide great performance right out of the box. Holley carburetors include dual accelerator pumps, mechanical secondaries, and dual-feed inlets for constant high-volume fuel delivery. Plus, with power-valve blowout protection and a 100 percent wet-flow test, these units set a standard for performance and reliability that's hard to beat. An attractive tumble polished finish is icing on the cake. Choose the Holley Model 4150 aluminum carburetor for your particular make and model.
( 34 )
$699.95
—
$749.95
Holley's Street Avenger 4-barrel carbs offer trouble-free operation in an easy-to-install package. They're calibrated to deliver the performance that you need, without the tuning headaches involved with other carbs. And all of this comes with a silver or color-anodized finish that'll look great under your hood. Street Avenger carburetors are available in different sizes and cfm ranges, with manual or electric choke, for a variety of engine applications. Features include: * Tunable metering system * Fuel filters in the primary and secondary fuel bowls * Center-hung floats * External float adjustments * Electric or manual choke * Emissions accessory ports * Adjustable secondaries * Power-valve saver * Dual-feed conversion fuel line
( 198 )
$671.95
—
$699.95
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 15 )
$1,749.95
—
$2,549.95
Holley's Street Avenger Model 2300 carburetors offer trouble-free performance in a good-looking, easy-to-install package. They're calibrated to give you the performance that you need, without the tuning headaches involved with other carbs. And all of this comes with a silver finish that looks as good as it performs! The Street Avenger is available in many different sizes for a variety of engines. Features include: * Gen IV no-trouble power valve * Built-in fuel filter * Center-hung float * External float adjustments * Electric choke * Two vacuum ports (one times spark and one PCV)
( 104 )
$579.95
—
$599.95
These Red electric fuel pumps from Holley feature an improved design for street and strip applications, and a tumble-polished billet look with the distinctive red logo. These pumps have a 97 gph flow rate, draw only 2 amps, and have a maximum pressure of 7 psi with an externally accessible pressure relief valve. They weigh only 2.88 lbs., and include a mounting bracket.
( 279 )
$199.95
Holley USB cables are sealed against dirty environments. These connector cables are designed to fit select Holley EFI systems. If your system's ECU is mounted in not-so-clean areas, use Holley sealed USB cables.
( 74 )
$80.49
—
$92.19
Introducing Holley Sniper EFI 2300 two-barrel fuel injection systems! They're perfect for any vehicle that came standard with a 2300 Holley flange, like some Fairlanes, F100s, Javelins, Mustangs, Thunderbirds, Cougars, and more. These systems are economically priced so you can have all the benefits of EFI and still have money to finish or upgrade your ride! Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today! Features/Benefits: * Bolt-on 2300 flange carburetor replacement * Throttle body mounted ECU (kits only); no extra boxes to mount * Supports up to 350 hp with two 100 lb./hr. injectors * Only 4 wiring connections required! (Battery +, Battery -, Switched Ignition, and RPM) * Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Equipped with C4 / C6 Ford transmission kick down lever, as well as TH350, 400, and 700R4 provisions * Accepts many common 5 1/8 in. OEM or aftermarket air cleaner assemblies * Master Kit includes complete fuel system consisting of: 20 ft. of 3/8 in. vapor guard fuel hose, 12-920 fuel pump, filters, necessary hardware and bulkhead fitting to return fuel into the tank * Sniper EFI software free to download which allows for real time tuning
( 56 )
$1,199.95
—
$1,549.95
Holley 4150 Double Pumper carburetors are a perfect upgrade for hot street cars and race vehicles—they're an American icon when it comes to performance. From their roots as the premier carb on many factory muscle cars, to powering thousands of vehicles across the finish line, the Double Pumper is a great choice—whether you're burning up the street or the quarter-mile. The Double Pumper is designed for use on lightweight vehicles with a manual transmission—or an automatic transmission with a high stall and low rear-end gears. These carburetors are available in a gold dichromate or tumble polished shiny finish, along with these features: Dual accelerator pumps for additional fuel under initial acceleration; mechanical secondaries for great performance; dual feed fuel inlets for constant high-volume fuel delivery; and a manual choke for easy control of engine warm up. Order the model with options to suit your application.
( 133 )
$699.95
—
$899.95
Holley aluminum Street HP carburetors make tire-smoking performance affordable! They utilize the best features from Holley's Race Bred models but are tamed for street and light competition use, weighing up to 40 percent less and are even easier on your wallet. Each Street HP carburetor features an aluminum contoured main body design with a tumble polished shiny finish and screw-in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response, drivability, and maximum performance. A street HP base plate is used so there is plenty of vacuum ports for power brakes, PCV, etc.
( 53 )
$799.95
—
$849.95
A leader in fuel systems, Holley offers less weight with more performance in their 4160 aluminum street carburetors. High performance enthusiasts are always looking for ways to make their street machines faster. These aluminum carburetors can equate to 5 lbs. of weight savings compared to their zinc counterparts! Less weight, move faster and possibly save some dough at the fuel pump--what could be better? Holley 4160 aluminum street carburetors are offered in electric chokes for easy warm-ups or manual chokes allowing you to control the warm up. Vacuum secondaries, and adjustable floats make these aluminum carburetors bolt-on performance upgrades for a wide variety of vehicles. Plus, they will remain bright and shiny and can be hand-polished for a show car shine that will definitely brighten up your engine compartment! Lightweight performance and heavyweight looks; a dynamic duo for under your hood--Holley 4160 aluminum street carburetors.
( 109 )
$516.95
—
$536.95
Holley Super Sniper EFI Stealth 4150 fuel injection systems are what you need to convert your vehicle to fuel injection. Holley Super Sniper Stealth 4150 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Compatible with draw-through or blow-through forced induction applications * 2 Bar MAP sensor * Integrated ignition timing control * -6AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0-5 V sensors, one sensor ground supply for 0-5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-886 is recommended * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit for 2.250 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange
( 4 )
$2,099.95
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 9 )
$1,349.95
—
$2,149.95
Do you need to refurbish your tired Holley carburetor? A Holley Renew kit brings your carb back to original specs and like-new condition! These carburetor Renew kits from Holley come complete with all of the necessary gaskets, O-rings, pump diaphragm(s), needle and seat(s), power valve(s), detailed instructions, and hardware for a complete rebuild. When a Renew is in order, trust Holley to do it right!
( 583 )
$45.52
—
$208.95
Holley 2300 model carburetors are perfect for racing classes where 2-barrel carburetors are required, or for hot rodders looking for something different. These units have many performance features—including a manual choke, center hung float bowl, universal throttle lever, all-metal parts, replaceable jets, a power valve, and high-flow venturi. Holley 2300 carburetors are available in universal and vehicle-specific applications.
( 99 )
$534.95
—
$649.95
Holley Sniper EFI Autolite 1100 fuel injection systems let you convert your classic Autolite 1100 carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI! You can also use the Sniper EFI to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature a 100 lbs./hr. fuel injector capable of supporting 175 hp on naturally aspirated engines. For your high performance needs, look to Holley! Standard Sniper EFI system features: * Bolt-on Autolite 1100 carburetor replacement * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); no laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion kit for 1963-67 Inline 6-cylinder Ford engines from 144 ci. to 300 ci.
( 5 )
$1,099.95
Holley Aluminum Street HP carburetors deliver weight savings, lasting good looks, and affordable tire-smoking performance! Utilizing the best features of their race-bred HP and the Double Pumper, Holley offers these amazing street/strip carburetors that weigh 40 percent less—and take less out of your wallet! Street HP carburetors display an aluminum contoured main body design with a tumble-polished, shiny finish, plus screw-in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor, calibrated for a hot street/strip engine setup with outstanding throttle response, drivability, and maximum performance. Finally, they are 100 percent wet-flow tested to ensure that they arrive ready-to-run. More Holley Aluminum Street HP carburetor features: * Contoured Venturi inlet offers balanced airflow for increased horsepower * Four-corner idle for precise idle control * Mechanical secondaries for impressive tire-turning performance * Dual accelerator pumps for additional fuel under initial acceleration * Dual feed fuel inlets for constant, high-volume fuel delivery * Available in 650, 750, 850, and 950 cfm versions * Street HP base plate is used, so there are plenty of vacuum ports for power brakes, PCV, etc. * Intended for lightweight vehicles with manual transmission or automatics with a high stall and low gearing
( 37 )
$749.95
—
$799.95
Holley Terminator X Stealth 4150 EFI systems feature 4 or 8, 100 lb. fuel injectors capable of supporting up to 650 hp naturally aspirated, and 600 or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! The throttle body has the standard 4150 carburetor flange so it will bolt down where your square bore carburetor was. Holley Terminator X Stealth 4150 systems also include transmission kick-down provisions for GM TH350, TH400, 200R4, 700R4, and Ford's C4 and C6 applications!
( 8 )
$1,949.95
—
$2,449.95
Holley 100 gph in-line electric fuel pumps are designed for high-output naturally aspirated and forced induction EFI and carbureted vehicles. They support up to 900 EFI or 1,050 carbureted horsepower, and is compatible with pump gas, race gas, diesel, or E85. The pumps utilize inlet and outlet connections that make installation easy on new applications and quick replacement of existing competitor fuel pumps. Holley universal 100 gph in-line electric fuel pumps include a male -6 to -8 AN discharge fitting with integral high-pressure check valve, terminal nuts, terminal boots, and installation instructions. Additional features and specs: * Roller vane design provides fuel pressure and volume to support up to 900 EFI N/A or 700 EFI boosted horsepower * Compatible with Flex Fuel (E85/E90) and all types of gasoline (100 percent alcohol fuels may diminish fuel pump life) * Inlet thread is -10 AN female ORB (O-ring port fitting) and discharge is a female -6 AN ORB
( 24 )
$217.95
Holley carburetor bypass style fuel pressure regulators are designed for systems that require a return line back to the tank. They're used for carbureted applications only, and are preset at 7 psi. The regulators are made of aluminum and feature a natural or black finish.
( 197 )
$81.09
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
