Availability
On Sale
Holley gasoline carburetor jet assortment kits are the professional way to track-tune your Holley carburetor for top performance. They consist of two each in different jet sizes. The jets are contained in either a plastic case or aluminum plate that are designed to keep them separated and make them easily accessible.
( 106 )
$96.05
$58.85
—
$86.45
Holley Commander 950 air temperature sensors are designed as direct replacements for those in your Commander 950 fuel injection system. They screw into the intake plenum.
( 11 )
$57.49
On Sale
Holley air bleed assortment kits are a must when track-tuning a 4500 Dominator HP carb for maximum performance. They include four of each air bleed size from 23 to 79, and feature 10-32 UNF threads.
( 6 )
$349.95
$314.95
On Sale
Holley carburetor float kits work with side-hung and center-hung Demon and aftermarket Holley carburetor floats, as well as many OE Holley, Ford, Chrysler, GM, Motorcraft, AMC, and Rochester marine carburetors. Offered in brass and Nitrophyl for internally and externally adjustable floats, they're available as primary floats, secondary floats, and secondary floats with notches that include jet extensions. Holley's wedged floats feature a reinforced float bracket assembly that allows more fuel to flow through the bracket—especially when using bottom-feed needles and seats. Technical notes for Holley carburetor float kits: * Wedged floats are designed for oval track use, so the float stays open in turns * The use of brass floats on the secondary side of Model 4160 carburetors factory-equipped with Nitrophyl floats may result in loss of fuel control and flooding if the floats contact the metering plate * You should only install jet extensions and notched floats in rear fuel bowls
( 108 )
$49.95
$18.15
—
$56.19
Holley alcohol carburetor jet assortment kits are the professional way to track-tune your Holley carburetor for top performance. They consist of four each of 24 standard length jets, ranging from size 132 to 200. The jets are contained in a plastic case that is designed to keep them separated and make them easily accessible.
( 6 )
$178.95
On Sale
Holley standard main jets are just what you need to fine-tune your carburetor for street or race performance. Threaded for easy installation and removal, they manufacture these brass jets to high tolerances for consistency. They're available in dozens of jet and jet drill sizes for precise fitment on countless gasoline-fueled vehicles. When considering replacement parts for your carburetor, trust the expertise of Holley.
( 199 )
$14.33
$7.88
—
$15.38
On Sale
Power valve blowout protection can be added to carb models 2300, 4150, and 4160 with these Holley power valve check ball kits. These kits include a spring, a brass seat and check ball, a drill bit, and a stop. They will effectively protect the power valve, and are easy to install.
( 26 )
$31.79
$28.61
On Sale
Keep your carb precisely tuned for efficient performance. Holley air bleed kits are designed to fine-tune your carburetor's intermediate and high-speed circuits. They are made from high-quality brass.
( 14 )
$28.03
$15.42
—
$28.03
On Sale
Upgrade your carburetor's hardware for maximum performance with the help of Holley. Their needle and seat hardware kits work with all Holley carbs with an adjustable needle and seat. Also keeping style in mind, these kits are offered in gold or black. Kits include adjusting nut, lock screw, gaskets, and O-ring.
( 20 )
$11.40
$10.26
—
$12.58
On Sale
Holley carburetor fuel inlet filters are moraine-type fuel inlet filters that fit Holley 4-barrel street carburetors with center-hung float bowls or square bowls. They are also great stock replacements for some original equipment carburetors.
( 24 )
$25.42
$22.88
Holley carburetor metering block main well plugs are designed to block off passages in the secondary metering blocks. They are manufactured from durable brass and press in place easily.
( 2 )
$21.00
On Sale
Want to upgrade your street carburetor to a high performance race carb, but don't have the means to do a complete carb swap? If you can turn a screwdriver, you can get 25 to 50 hp from these Holley carburetor main bodies. With no air horn, choke tower, or choke control to restrict airflow, they deliver extra power easily and affordably. These main bodies are available in a standard dichromate or shiny finish.
( 75 )
$273.95
$123.95
—
$349.95
Holley sight plugs allow you to check the float bowl level without removing the plug and spilling fuel. They prevent the mess that happens while adjusting the float level of your carburetor.
( 28 )
$9.78
These Holley main jet extensions feature a new design that actually screws into the metering block. The main metering jet threads into the end of the extension, moving the fuel entry point for the main jet out into the fuel bowl. When it's in this location, it cannot be uncovered preventing a lean condition during periods of extreme acceleration or braking.
( 10 )
$16.95
—
$32.66
Holley emulsion jets are just what you need to fine-tune your carburetor for street or race. Threaded for easy installation and removal, Holley jets are manufactured to high tolerances for consistency.
Not Yet Reviewed
$18.20
Holley emulsion bleed kits are designed to fine tuning of your Holley HP Series 390 cfm 4-barrel carburetor. They include a plastic case with labeled compartments for easy identification. The emulsion bleed kits include the following sizes: * 10 blank emulsion jets to drill your own size * 10 emulsion jets size 0.020 in. * 10 emulsion jets size 0.031 in. * 10 emulsion jets size 0.040 in. * 10 emulsion jets size 0.046 in. * 10 emulsion jets size 0.052 in.
( 1 )
$199.95
On Sale
Holley alcohol jets are specially designed to work with the unique metering blocks of alcohol carburetors. The metering blocks accept the physically larger size of these jets.
( 1 )
$22.41
$11.66
—
$22.41
On Sale
Holley EFI Terminator X fuel injectors feature a precision lapped disc valve, high-quality brass windings, and high-temperature O-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. you are sure to find an injector that matches your non-emissions-controlled application. Holley EFI Terminator X fuel injectors can also be used with any ECU that utilize high-impedance fuel injector drivers. Features: * PICO/EV6-style performance injectors are sold individually or in a set of 8 * High impedance for use with saturated drivers * Rated injector flow 220 lb./hr. at 43 psi of base fuel pressure * USCAR injector connector * 40mm O-ring to O-ring length * Compatible with many OEM LS intake manifolds * Easy to install in any Holley EFI Hi-Ram intake, using Holley fuel rail adapter kit
( 30 )
$999.95
$64.15
—
$1,449.95
On Sale
Holley Sniper fuel injectors feature a precision lapped disc valve, high-quality brass windings, and high-temperature O-rings to provide excellent linearity with no discernible "bounce" at low-pulse widths. Features include: * PICO/EV6-style performance injectors * High-impedance (12.2 ohms) for use with saturated drivers * Rated injector flow: 36 lbs./hr. at 43 psi * Supports up to 575 hp * Tri-cone spray pattern
( 1 )
$649.95
$583.95
On Sale
Holley Terminator EFI fuel injectors provide excellent linearity with no discernible "bounce" at low pulse widths, as commonly found in other injectors. They feature a precision-lapped disc valve, high-quality brass windings, and high-temperature O-rings. They're available in 80 or 205 lbs./hr. flow rates to accommodate a variety of vehicles—from mild street cars to high-horsepower race applications. Holley Terminator EFI fuel injectors provide precision fuel delivery you can depend on. Features: * Bosch/EV14 performance injectors * High-impedance for use with saturated drivers * Rated injector flow varies by model * Supports up to 2,600 hp (8 injectors) * Maximum recommended fuel pressure: 75 psi * May require Holley EFI systems wiring harness
( 1 )
$149.95
$134.95
On Sale
Holley Sniper EFI fuel injectors provide excellent linearity with no discernible "bounce" at low pulse widths, as commonly found in other injectors. They feature a precision-lapped disc valve, high-quality brass windings, and high-temperature O-rings. Order a set of eight Holley Sniper EFI performance fuel injectors for use with your Holley EFI intake manifold. Features: * PICO/EV6-style performance injectors * High impedance (12.2 ohms) for use with saturated drivers * Rated injector flow: 36 lbs./hr. at 43 psi * Supports up to 575 hp (maximum) * Tri-cone spray pattern * Not intended as service injectors for Sniper EFI TBI product line
( 1 )
$86.95
$78.25
Holley mechanical fuel pump rebuild kits are what you need when replacing those worn-out parts in your Ultra HP pumps. Holley mechanical fuel pump rebuild kits come with an assortment of parts to get the job done, including a valve body to bottom gasket, a sintered bronze breather vent, a rubber pulsator, an engine mounting gasket, and a brass hose barb.
( 1 )
$53.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
