Availability
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 15 )
$2,349.95
—
$2,549.95
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 9 )
$1,949.95
—
$2,149.95
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 351 )
$230.95
$104.95
—
$249.95
Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings
( 2 )
$1,049.95
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 28 )
$315.95
—
$549.95
Holley 525 LPH fuel pump modules are designed and engineered to meet the demands of today's high-pressure and high-flow engines with efficiency, reliability, and decades of engineering expertise. These high performance components with OE-quality and fitment in mind will deliver maximum fuel flow throughout a wide pressure range to support major horsepower. Kit includes assembled module, a new filter sock, flange O-ring, and the lock ring to help complete installation into stock fuel tanks. Holley 525 PLH fuel pump module features: * 6061-T6 Aluminum fuel pump module with a 525 LPH (liters per hour) * Sniper pump assembly drops into stock EFI fuel tank on select vehicles * 6AN O-ring outlet and return ports for easy plumbing connections * Can be used with both carbureted and EFI (Electronic Fuel Injection) fuel systems depending on your needs * Supports up to 1200 EFI or 1450 carb (hp at 60 psi at 13.5 V/16.9 amp draw; individual systems will vary based on fuel system design, the regulator type, fuel cell location, etc.) * Flange is bright dip black anodized for corrosion protection from undercar moisture
( 2 )
$431.95
The world famous Holley Tri-Power carburetor system is legendary in Chevrolet circles. They were the ultimate power statement, coming factory on cars like the 1967 427 Corvette. With Holley Tri-Power 3x2 intake and carburetor kits, you can have the same look on your SB Chevy. These setups are perfect for muscle cars, street rods, classic hot rods, rat rods, trucks, and many more vehicles. You can cruise around economically on the 325 CFM center carb, and when you decide to step on it, the two 350 CFM outboard carbs kick in for head-snapping performance! Holley Tri-Power kits are available with dichromate or shiny finish carburetors. Choose your favorite. Systems include: * Weiand dual plane medium rise 3x2 intake manifold * Three Holley 2-barrel carburetors -- Two 350 CFM outboard carburetors -- One 325 CFM center carburetor with electric choke * High-quality steel fuel lines * Progressive throttle linkage * Reusable air filters with polished housings
Not Yet Reviewed
$2,699.95
Holley 5.0L EFI intake manifolds may be emissions-legal, but don't let that fool you into thinking they're restrictive--they flow tons of unrestricted air! They feature a 2,000 to 6,500 rpm power band, external EGR-passage maximized port and runner sizes, and they retain the stock injector and water outlet locations. The lower manifold ports match up to Holley cylinder heads, so you can be assured of getting the perfect match in the perfect power setup.
( 5 )
$1,149.95
—
$1,249.95
Holley 4160 marine carburetors include all of the same features as their street cousins--plus a few more that make them adaptable and legal for marine use. Primary differences include fuel bowl vent tubes, sealed throttle shafts, and universal marine calibration. Plus, they are designed to meet flooding and backfire requirements as defined by the U.S. Coast Guard. Other than that, they're typical Holley quality all the way, with a square bore flange, vacuum secondaries, single or dual fuel inlets, an electric or manual choke, 30cc accelerator pumps, and a 5 in. airhorn (unless noted otherwise). And last but not least, you can choose between universal or direct fit OE replacement versions.
( 10 )
$899.95
Holley Sniper in-tank fuel pump modules are direct-fit units to drop directly into the specific vehicle application. Two modules--the Sniper 340 lph and Holley 525 lph--feature a 6061 T-6 flange that has a bright dip black anodized finish for corrosion protection and long-lasting good looks. The flanges have a 6AN O-ring outlet and return port making the plumbing connections easy. The assembled modules include a new filter sock and the lock ring to complete the installation into your stock fuel tank. Choose the module designed for your vehicle. Notes: * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for the specific application * 340 lph module supports up to 700 EFI or 900 hp carbureted * 525 lph module supports up to 1,200 EFI or 1,450 hp carbureted * Both EFI and carbureted systems will need a bypass design regulator
Not Yet Reviewed
$519.95
Holley Sniper E85 in-tank electric fuel pumps are high-output models that fit the most popular EFI applications. The pumps can be regulated to support carbureted systems, as well, and all are compatible with gasoline or E85. Designed for applications requiring more fuel flow (utilizing the factory OE lines and mounting brackets), the 340 lph fuel pumps can also be used as a universal replacement—or upgrade for aftermarket applications requiring more fuel flow to support additional horsepower, while using power adders. Order the model recommended for your vehicle. Features include: * 340 lph E85-compatible * Designed for in-tank use only * Compact enough to fit in existing hanger assemblies without modification * Complete kit with all drop parts, accessories, and installation instructions * Filter, wiring pigtail, rubber hose, clamps, and rubber grommet included * Inlet filter meets or exceeds original equipment specifications and provides improved filtration/durability * Can be used with carbureted or EFI applications * Perfect upgrade for aftermarket pumps, like Holley retrofit EFI modules, when more fuel is needed with turbos or nitrous
( 30 )
$162.95
On Sale
Holley introduces a new addition to their manifold line up—the SBF Hi-Ram EFI intake manifolds that come with an LS throttle body flange top (in either 95mm or 105mm throttle body sizes). Their runner length and tapered cross-section design will perform well for a wide range of engine configurations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. With the aggressive, bold, race-bred styling, there's no doubt that these Hi-Ram EFI manifolds will make your bad intentions clear for drag racing, muscle car, marine, off-road, sandrails, pulling trucks, competition track, street rod applications, and more! Additional features and specs include: * Cast aluminum construction * Available in natural cast aluminum or black powdercoat finish * Manifold is designed for an 8.2 in. SBF deck height * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * A low-profile distributor will be needed when using this manifold (sold separately)
( 5 )
$1,249.95
$812.95
—
$1,249.95
Holley single plane carbureted intake manifolds are designed to provide a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The carburetor mounting pads will accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These Holley intake manifolds are also engineered to accept most stock hardware and accessory brackets—but offer performance features like: an updated plenum divider area; a 1 in. shorter height than their Strip Dominator manifold; and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. Features include: * Single-plane with isolated plenum * Square-bore carburetor mounting flange * Isolated water crossover * Power band: 2,500 to 7,500 rpm * Height: Front 4.18 in., rear 5.28 in. * Port size: 1.92 in. height, 1.20 in. width
( 9 )
$434.95
Holley EFI intake manifolds feature port-matched upper and lower runners for reduced restrictions. Plus, the EGR passages have been relocated to the outside of the manifold to allow for the use of larger intake ports. The result is greater air capacity, which makes these manifolds the perfect choice for supercharged engines. They're available in a variety of styles and options; select the model designed for your vehicle and/or engine application.
( 6 )
$599.95
—
$682.95
Holley Strip Dominator intake manifolds are classics that have been making power for Chevys for almost as long as Holley has been making carburetors. They're proven power builders, engineered to achieve maximum performance. Their single plane design, with a deep, open plenum and isolated runners, produces good power from 4,500 rpm to 7,600 rpm for small blocks, and up to 8,500 rpm on big blocks. There is no exhaust heat crossover.
( 35 )
$399.95
—
$417.95
On Sale
Summit Racing™ fuel pump and regulator Pro Packs consist of proven performance fuel pumps and regulators. Just select your brand, flow rate, and pressure requirements, and one part number gets you everything. We've even included a relay kit with the electric fuel pump combos. Economical and convenient, Pro Packs are available for virtually any application from the 1950s and up.
( 60 )
$231.90
On Sale
Holley Pro-Jection intake manifolds are designed for Holley 2-barrel Pro-Jection systems. The high-rise, dual-plane manifolds are perfect for powerband ranges from idle to 6,000 rpm. With these manifolds, there is no need for manifold-to-TBI adapters. To make installation easy Holley utilizes late model alternator and A/C bracket mounting bosses and include provisions for an EGR valve and vacuum taps off of the runners. Power is made easy with Holley Pro-Jection intake manifolds.
( 6 )
$504.95
$328.95
On Sale
Holley Sniper stock replacement fuel tanks are designed to meet or exceed the quality of your factory original. Whether you have a track or street car, or a car you're restoring, Sniper has the high-quality fuel tanks you're looking for. Start your fuel system project fresh with a Holley Sniper stock replacement fuel tank—order the model designed for your application. Features include: * The steel fuel tanks have a galvanized finish for corrosion protection and good looks * Stock replacement fuel tanks are made to OEM specifications for a great fit * Perfect companions with Holley muscle car EFI modules or Retrofit EFI pump modules * Tank sending unit lock ring is included
( 61 )
$159.95
$87.95
—
$226.95
Complete your EFI Hi-Ram manifold with a Holley Hi-Ram intake manifold top. These intake manifold tops, along with their matching bases, are made from cast aluminum—with either a natural or black finish. They provide a cost-effective option for your high performance applications where induction system height is not limited. Get aggressive, bold styling and performance with a Holley EFI Hi-Ram intake manifold top.
Not Yet Reviewed
$219.95
On Sale
Make Holley SBF Hi-Ram EFI intake manifold bases the foundation for your custom induction system. Their modular design allows them to accept a variety of carbureted and EFI tops. Plus, their runner length and tapered cross-section are designed to perform well for a wide range of engine configurations. Aggressive looks and bold styling make your bad intentions clear—whether you're drag racing, truck pulling, or making waves in your boat—when you start with the Holley Hi-Ram EFI intake manifold bases. SBF Hi-Ram EFI intake manifold base features and specs: * Manifold base only designed for 8.2 in. deck height * Cast aluminum construction * Available in natural cast aluminum (satin) or black powdercoat finish * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system
( 1 )
$996.95
—
$1,049.95
$648.95
—
$682.95
On Sale
Holley 351W Ford Hi-Ram EFI intake manifolds are designed for your high performance engine. The modular design of these manifolds offers a runner length and a tapered cross-section layout that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with 351W Hi-Ram EFI intake manifolds from Holley.
( 4 )
$1,349.95
$742.95
These machined aluminum EFI fuel rails are capable of handling 1,100+ hp engines. They feature a large inner diameter bore to decrease fuel pressure drop and help cancel out back pulses.
( 54 )
$149.95
—
$287.95
On Sale
Holley SBF Hi-Ram intake manifold tops are a great solution when you have limited room in the front of the engine bay. Designed to mount on Holley's existing SBF Hi-Ram manifold bases, these aluminum plenum tops resemble the older Ford EFI manifolds and let you mount the throttle body on the side. This will allow for easier fabrication for boosted applications or for just a different look on your Hi-Ram manifold. These side-mount plenum tops are available in natural cast aluminum or black powdercoat finishes—in models for Ford 5.0L style throttle body patterns in 95mm and 105mm sizes. Order the SBF Hi-Ram intake manifold top that you need for your custom induction system. Additional features and specs include: * Manifold top only (designed for side-mounted throttle bodies) * Cast aluminum construction * Allows room for designing boosted applications * Mounts to existing Hi-Ram manifold bases * Lid has been verified to fit under Cervinis 2.5 in. cowl hood on 1979-93 Mustangs with 351W and 302W Hi-Ram bases when using motor mounts that retain stock engine locations
Not Yet Reviewed
$369.95
—
$410.95
On Sale
Holley Sniper carbureted fabricated intake manifolds are budget-friendly, sheet metal style intake manifolds. Each manifold is precision-fixtured and welded for a perfect fit and structural integrity. They are available for carbureted Chevy LS, Ford Coyote, small block Chevy, big block Chevy, and small block Ford engines. Features include: * Available for single or dual carburetor applications * 3mm (1/8 in.) thick T6061 sheet aluminum construction * More durable than competitive intakes * Bead-blasted silver or black anodized finishes * 100 percent TIG-welded * Custom Holley Sniper logo
( 37 )
$899.95
$494.95
—
$849.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
