Availability
Direct upgrade for existing HyperSpark ignition box, Holley Sniper EFI HyperSpark 2 CD ignition boxes feature a smaller form factor and hotter spark. These low-profile boxes can fit nearly anywhere inside of your engine bay or cockpit. They have all the proven features of their predecessor in a smaller package, making it easier to mount, providing the cleanest installation possible. HyperSpark 2 ignition boxes pack up to 150 mJ of spark energy when used with the matching ignition coil, resulting in enough energy to safely fire your Sniper EFI engine combination. Features: * Plug-and-play with existing HyperSpark installations, or Sniper EFI HyperSpark main harnesses * Includes an ignition harness for fresh Sniper EFI Installs simply wanting to add timing control * New processor and board design provide a highly efficient ignition, minimal heat, and maximum spark energy with less current draw * High rpm operation and maximum output using the HyperSpark ignition coil * Powerful capacitive discharge of multiple sparks improves performance and ensures complete combustion * Consistently high-spark energy of 135 to 150 mJ for every firing, from idle to redline rpm * Operates on most 7 to 28 V electrical systems * Fully protected against an open coil, shorted coil, and open load * 1.47 lbs. lighter than an original HyperSpark ignition box * Quickens throttle response and improves starting * Tach Output to drive an external tachometer
( 2 )
$399.95
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 123 )
$449.95
—
$699.95
Holley Sniper EFI HyperSpark CD ignition boxes are the perfect ignition upgrade to complement your Sniper EFI installation. With minimal wiring, these units are ready to plug-and-play with your Sniper system. Holley Sniper EFI HyperSpark CD ignition boxes feature: * 135mJ of spark energy when used with the HyperSpark ignition coil; ensures complete combustion * Box is sealed and powdercoated to be installed in the harshest of locations * External LED helps verify 12 V, cranking rpm, and low battery voltage * Very low key-off current (<150uA); your battery won't drain during storage periods
( 53 )
$399.95
Holley Sniper EFI HyperSpark ignition coils are the perfect ignition upgrade to complement your Sniper EFI installation. This high-output coil produces 135mJ of spark energy when used with the HyperSpark ignition box, ensuring complete combustion. The ignition coil comes self-contained in its own mounting bracket, and mounting hardware is provided to facilitate installation. Holley Sniper EFI HyperSpark ignition coil features: * Works with Sniper EFI for easy plug-and-play installation * Ignition coil connector removes any doubt of loose connections at the ignition coil * Integrated ignition coil bracket simplifies mounting ignition coil
( 44 )
$61.19
On Sale
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$549.95
$302.95
—
$549.95
Holly Sniper EFI coil driver modules are designed to be used in place of a capacitive discharge box. These coil drivers are utilized to amplify the energy transferred to your spark plug, promoting complete combustion in the cylinder! Features: * Compact size allows for easy installation without cluttering up your engine bay * Labeled wires take the stress out of your wiring installation * Requires use of a canister-style ignition coil
( 4 )
$164.95
Specifically designed for use with the Holley 8.2 in. SBF Hi-Ram intake manifold, these EFI low-profile SBF Dual Sync distributors share all the same great features of other Holley EFI Dual Sync distributors. The design includes dual Hall effect sensors for the crankshaft and camshaft signals. They can be used as just a crank speed input, as well as providing a cam sync signal for a sequential fueling operation—or to provide the needed crank and cam signals for coil-on-plug applications. The precision-machined shutter wheel design ensures accurate timing, even at very high engine speeds. Holley Sniper EFI low-profile SBF Dual Sync distributors also provide compatibility with other EFI systems that support Hall effect crank and cam sensors. Product features include: * Plug-and-play with Holley EFI * CNC-machined billet aluminum housing * Integrated LEDs allow for easy setup * Hardened steel distributor gear
( 1 )
$549.95
New for the Holley Sniper EFI product line is a factory replacement Sniper EFI canister-style ignition coil. This ignition coil is potted with a premium-grade epoxy, making it perfect for high-vibration environments—and it can be mounted in any direction, even if it's horizontal, vertical, or upside down. "No oil" means "no failure" for multiple mounting positions. The Sniper EFI canister coil is perfect for anyone wanting to upgrade their ignition system, while maintaining a factory look under the hood. Features: * Metal canister is epoxy filled to protect the internal coil windings from high-vibration applications * Improved output coil for electronic ignitions, and MSD ignitions (ballast resistor required for points) * 100:1 turns ratio and lower primary resistance produce high-voltage output
( 6 )
$63.05
Holley Sniper EFI HyperSpark distributor rotors are designed to work with the 565-300 series HyperSpark distributors. These replacements are injection-molded from Rynite material for incredible strength and high dielectric properties.
Not Yet Reviewed
$13.97
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
