Helix Suspension, Steering and Brakes at Summit Racing

Helix Tie Rod Ends

Helix tie rod ends are forged from premium stainless steel then heat-treated and polished for strength and durability. They use durable neoprene rubber boots for greater tear resistance and to lock out dirt. The tie rod ends feature an internal heavy-duty low friction design—with a hardened and polished ball stud and high strength bearing to reduce internal friction and wear. These steering linkage components improves ride, performance, and driving safety. They are available in different styles, threads, and lengths. You can rely on replacement parts from Helix, the leader in aftermarket suspension systems.

5.0 out of 5 stars ( 2 )

$39.95

Helix Universal Street Rod Motor Mounts

Helix universal street rod motor mounts are available for Chevy small and big block cars and trucks. These universal mounts are easy to use; just install the mount to the engine, measure the distance between the frame rail and the mount, and then trim the frame mounts to fit. That's all there is to it! The steel motor mounts feature a weldable design, two engine mounting brackets, two frame mounting brackets, and urethane bushings. Give your Chevy engine the support it needs with universal street rod motor mounts by Helix.

3.4 out of 5 stars ( 5 )

$99.95

—

$149.95

Helix Street Rod Coilover Shock Sets

Helix's Street Rod coilover shock sets offer the ultimate performance and look great too! These shocks are stronger, and smoother than comparable shocks. Shock shaft is hard anodized steel body that delivers extra strength, while PTFE pistons, silicone bladders and titanium nitride coated shafts combine for smoother suspension movement and extra traction on bumpy surfaces. Fully adjustable coilover shocks allow you to fine tune your hotrods spring tension and ride height. The coilover shock sets are available in stroke lengths and mounting options suitable to your application needs.

Not Yet Reviewed

$329.95

Helix Steering Rod Shafts

Helix steering rod shafts are double-D style and designed for use with aftermarket steering joints or other 3/4 in. joints. They feature strong, durable construction and can be cut to fit your custom installation. With Helix steering shafts, you just cut, position, mark, and then drill a countersink hole for the set screw. The shafts are available in a variety of lengths and diameters, with or without U-joints.

2.67 out of 5 stars ( 3 )

$34.95

—

$189.95

Helix Manual Steering Racks

Helix manual steering racks are made from the highest quality aluminum alloy material. They feature all new parts and are backed by a limited lifetime warranty. The racks are offered in both front-steer and rear-steer options. You can trust Helix and their long history of aftermarket steering components to keep you ahead of the pack.

5.0 out of 5 stars ( 4 )

$229.95

—

$325.00

Helix 4-Link Kits

Take control of your vehicle's rear axle with Helix 4-link kits. They offer total adjustability making them ideal for the track or street, and include custom bolt-on brackets, resulting in true bolt-on installation for all parts (less the axle brackets). With heavy-duty steel construction, oversized 4-link bars, hardware, instructions, and a limited lifetime warranty, your classic will enjoy the modern performance of Helix 4-link kits.

2.0 out of 5 stars ( 1 )

$849.50

—

$1,895.95

Helix Steering Shaft Supports

Helix offers steering shaft supports for a variety of applications. They feature a precision-ground, heat-treated and hard chrome plated ball, surrounded by a PTFE self-lubricating race—all encased in a low carbon steel body that is zinc plated for corrosion resistance. Order the model recommended for your vehicle.

Not Yet Reviewed

$34.95

Helix Coilover Conversion Kits

Helix's coilover conversion kits are a precision balance of ride comfort and maximum road adhesion. You will immediately feel the difference with Helix coilovers with reduced body roll in corners, nose drive and squat when accelerating. The Helix springs are manufactured from the highest quality spring steel available. Helix uses state-of-the-art equipment using the latest technology producing what they call the best spring available anywhere. So if you're ready to improve the performance and ride comfort of your vehicle, you can do it with Helix's entire coilover spring setups without compromising consistency and durability. Order the coilover kit for your application needs.

Not Yet Reviewed

$349.95

Helix Offset Steering Rack Bushing Sets

Why install mushy rubber bushings when you can step up to the best quality? Helix offset steering rack bushing sets are made from durable polyurethane for better steering response and help eliminate bump steer. These offset bushings allow you to change to a new rack without changing any mounting points, and can be used to upgrade or convert your street rod, hot rod, rat rod, or custom application. Kits include: * Polyurethane offset rack bushings * Stainless offset washers * Sleeves

5.0 out of 5 stars ( 1 )

$49.95

Helix Mustang II IFS Lower Control Arms

Helix Mustang II IFS lower control arms are the Grade "A" LCA that your hot rod needs for maximum performance! These fully assembled ready-to-install control arms (left and right sets) are direct replacements for stock Mustang II LCAs and are engineered to accept coilover or air shocks without modification or fabrication. The Helix lower control arm assemblies feature precision fabricated TIG-welded construction and a 1 in. O.D. aircraft quality tubular steel design with full .120 in. thick walls for maximum strength and durability. This creates a lighter yet much stronger LCA that will endure a far higher stress load than the OEM design. For all your suspension needs, Helix delivers the winning edge for performance when it really counts!

5.0 out of 5 stars ( 2 )

$299.99

Helix Stabilizer Sway Bar Kits

Keep the sway away with Helix stabilizer bar kits! Helix sway bars are better than OEM stock sway bars—they are more durable and ready-to-install with all necessary hardware in a complete kit. Made from 3/4 in. heat-treated steel and then zinc or powdercoated for rust and corrosion resistance, the anti-sway stabilizer bars will keep the sway away on hard turns by providing much needed stabilizing and excessive roll prevention when cornering. For your vehicle's stabilizing needs, enjoy a smoother and more stable ride, with minimum sway and maximum stability with one of these stabilizer sway bar kits from Helix—the suspension experts! Kits include: * Stabilizer sway bars * Heat-treated steel bar construction with zinc or powdercoated finish * High-impact polyurethane bushings * Polished aluminum mounting brackets and lock rings * Spherical rod ends * Coated high-tensile strength bolts * Steel frame mount tabs * Available for multiple wheel base lengths

Not Yet Reviewed

$249.95

Helix Mustang II IFS Upper Control Arms

Helix Mustang II IFS upper control arms are Grade "A" units to provide your hot rod with maximum performance. They are fully assembled, ready-to-install, direct replacements for stock upper control arms on any Helix Mustang II IFS application and will fit most stock or aftermarket crossmembers without modification. Helix upper control arm assemblies feature all-steel, 12-point TIG-welded construction for maximum strength and durability, corrosion/rust-resistant painted tubes, powdercoated cross shafts, and a full .120 in. thick wall aircraft-quality tubular design which is lighter, yet much stronger than OE stock designs and provides for more clearance for body sheet metal. The cross shafts have a knurled surface mount area which provides "bite" into mounting surface area, preventing slippage and holding alignment settings. Helix upper control arm assemblies are equipped with a screw-in ball joint with urethane dust boot and grease fitting, castle nut with cotter pin, castle nut spacer, Nyloc nuts, and plain washers.

Not Yet Reviewed

$279.95

Helix Triangulated 4-Link Kits

Helix triangulated 4-link kits bring your rear axle under control! Helix knows that putting power to the ground is essential, whether your car is stock or hot rodded; so they built a 4-link kit that will remain straight and perfectly aligned under even the most demanding applications. Heavy-duty only begins to describe these kits, with each bracket custom-cut from 3/16 in. steel plate and bars made from 0.156 in. wall tubing. Topping off each bar are special, infinitely adjustable rod ends that are thicker than usual—and thread over 2.5 in. into the 4-link bars, giving you added strength and adjustability. Nearly 200 kits are available; order the model recommended for your vehicle.

2.25 out of 5 stars ( 4 )

$699.95

—

$949.50

Helix Stainless Steel Braided Brake Line Kits

Helix stainless steel braided brake lines are a high-quality, attractive addition to the finer aesthetics and underhood appeal of any classic ride, hot rod, or even an ordinary daily driver. Made from finest quality steel tubing and rust and corrosion-resistant gold zinc iridite coated ends and hardware, Helix stainless steel braided brake lines are durable and will hold up under the most extreme conditions. Where attention to detail is the key to a finished, professional appearance, and showroom appeal, Helix has it covered with these beautifully crafted stainless steel braided line kits. The kits include DOT-approved braided stainless steel brake lines and necessary hardware.

5.0 out of 5 stars ( 1 )

$79.95

Helix Solid Axle Shocks

Helix solid axle shocks are nitrogen gas charged shocks precision engineered for long life and improved performance over the standard "name brand" shocks. They feature a valving system with a 1 3/4 in. reserve tube that allows better fluid transfer, thus better performance. This means not only a better ride, but also sport shock-like handling when needed due to the extra reserve chamber, which allows the shock to stiffen when conditions demand it. Designed especially for hot rod use, they feature hard chrome non-rust shafts, along with superior dampening and rebound.

5.0 out of 5 stars ( 1 )

$72.49

Helix Tilt Steering Columns

Helix tilt steering columns are the perfect way to dress up your ride. The columns are comprised of all-new components, as well as GM-style plugs and adapters for easy installation. They are made with heavy-duty stainless steel and come complete with a compact shroud and dress-up kit, resulting in a sleek, stunning look. For extra comfort and style, Helix steering columns are designed with a 3-position tilt to get that perfect driving position. With a huge number of options you can get the perfect column to match your classic car, hot rod, or truck. Options include: * Black or chrome finish * Keyed ignition or push button * Push button ignition can be illuminated in your choice of colors * Optional RFID security * Drop brackets for easier installation * Chrome floor or firewall mounts * 6-bolt or 9-bolt steering wheel adapters * 3-speed or 4-speed overdrive indicator lenses

3.5 out of 5 stars ( 24 )

$649.95

—

$695.95

Helix Mustang II IFS Suspension Packages

Helix Mustang II IFS suspension packages and kits will give your car or truck the excellent handling of independent suspension with added stopping power! IFS kits come in many different configurations with the necessary components and hardware. And with over a thousand kits to choose from, they are sure to have what you need to fit your wants and budget. From complete systems with chrome columns to their Stage 1 kits that allow you to use off-the-shelf components to complete your setup, and everything in between, Helix has the Mustang II IFS systems and kits to revolutionize your vehicle's suspension.

2.35 out of 5 stars ( 17 )

$1,629.99

—

$4,299.95

Helix CornerKiller IFS Suspension Packages

Helix CornerKiller IFS front suspension will revolutionize your suspension and give your car or truck the ride and handling it deserves. Each front suspension is specially designed to give your classic ride modern handling and stopping power by updating all of the critical parts. Helix starts with precision-made components that are designed to work together. Tubular control arms provide the adjustability you need to setup the suspension for your car, while your choice of standard to 2 in. drop spindles help you customize the stance. Topping off the spindles is a set of 11 in. disc brakes to provide extra stopping power. Rack and pinion steering is provided by either power assist or manual racks. Finally choose between coilovers for maximum handling and a static stance or air struts for the ultimate in ride height control and ride quality. Bring your classic ride into modern days with a Helix CornerKiller IFS front suspension package.

3.0 out of 5 stars ( 3 )

$2,849.95

—

$4,299.95

Helix Parking Brake Cable Clevis Kits

Helix offers economical universal clevis kits designed to mount your parking brake cable to the rear brake system. Each steel clevis is zinc coated to resist rust and corrosion. Proper emergency brake function is important; maintain your system with quality OE replacement parts from Helix, an industry leader in high performance brakes for daily drivers and racing applications.

Not Yet Reviewed

$14.95

Helix Brake Booster and Master Cylinder Kits

The engineering team at Helix Suspensions has specifically designed these kits to convert your vehicle to power brakes with their bolt-on power brake booster kit. The brake booster bolts in the stock master cylinders location and uses the stock brake pedal with no cutting or welding. Kits include a new power brake booster, new Corvette master cylinder, new proportioning valve, (except drum/drum applications) mounting bracket, brake fluid fill bottle and all mounting hardware. It is important to note that existing brake lines will need to be modified and requires a low pressure stop light switch.

Not Yet Reviewed

$449.95

—

$466.95

20 Results Found For "rod"