12 Results Found For "arms"

Helix is a leading manufacturer of aftermarket suspension, steering, and brake components for many vehicles—from daily drivers to show cars. Achieve the ride,...

Helix is a leading manufacturer of aftermarket suspension, steering, and brake components for many vehicles—from daily drivers to show cars. Achieve the ride, response, and performance you seek from your car or truck with Helix. Summit Racing carries a variety of Helix parts for your vehicle, including steering wheels, control arms, U-joints, air tanks, brake line accessories, and more! Shop Helix at Summit Racing now!

Showing In Stock Items. Show All 12 Items.

Individual Parts

Part Groups

Results 1 - 12 of 12

Helix Mustang II IFS Lower Control Arms

Helix Mustang II IFS lower control arms are the Grade "A" LCA that your hot rod needs for maximum performance! These fully assembled ready-to-install control arms (left and right sets) are direct replacements for stock Mustang II LCAs and are engineered to accept coilover or air shocks without modification or fabrication. The Helix lower control arm assemblies feature precision fabricated TIG-welded construction and a 1 in. O.D. aircraft quality tubular steel design with full .120 in. thick walls for maximum strength and durability. This creates a lighter yet much stronger LCA that will endure a far higher stress load than the OEM design. For all your suspension needs, Helix delivers the winning edge for performance when it really counts!

5.0 out of 5 stars ( 2 )

$299.99

Helix Mustang II IFS Upper Control Arms

Helix Mustang II IFS upper control arms are Grade "A" units to provide your hot rod with maximum performance. They are fully assembled, ready-to-install, direct replacements for stock upper control arms on any Helix Mustang II IFS application and will fit most stock or aftermarket crossmembers without modification. Helix upper control arm assemblies feature all-steel, 12-point TIG-welded construction for maximum strength and durability, corrosion/rust-resistant painted tubes, powdercoated cross shafts, and a full .120 in. thick wall aircraft-quality tubular design which is lighter, yet much stronger than OE stock designs and provides for more clearance for body sheet metal. The cross shafts have a knurled surface mount area which provides "bite" into mounting surface area, preventing slippage and holding alignment settings. Helix upper control arm assemblies are equipped with a screw-in ball joint with urethane dust boot and grease fitting, castle nut with cotter pin, castle nut spacer, Nyloc nuts, and plain washers.

Not Yet Reviewed

$279.95

Helix Mustang II IFS Control Arm Kits

Helix Mustang II IFS control arm kits are fully assembled, ready-to-install, direct replacement stock upper and lower control arms for use on Helix Mustang II IFS applications and will also fit most stock or aftermarket crossmembers with gussets installed. The assembly features precision fabricated TIG-welded construction and 1 in. O.D. aircraft quality tubular steel design with full .120 wall for maximum strength and durability. This makes for a lighter weight yet much stronger LCA than the original stock arm that will endure a far higher stress load than the OEM design. The complete assembly includes cross shaft with rubber nitrile bushings and steel sleeves, knurled surface mount area on cross shaft, screw-in ball joint with urethane dust boot and grease fitting, castle nut with cotter pin, castle nut spacer, Nylock nuts and washers. For all of your suspension needs, Helix delivers winning edge performance when it really counts! Product features and details: * Mustang II IFS control arm kits include two upper control arms and two lower control arms—along with everything in one kit for installation * TIG-welded tubular construction * The lower arms are a direct replacement for stock Mustang II LCA's with standard springs * The upper control arms are a stock width design (non-narrowed) and ready to drop in immediately out of the box * Plain painted surface * Powdercoated cross shaft finish * Greased fitting included * Urethane dust boot * Fully assembled

Not Yet Reviewed

$549.95

Helix Control Arm Bolts

Helix control arm bolts are T-bolt sets offered for Mustang II upper control arms. They are especially designed as stock replacements for the hard-to-find OE specialty bolts. Helix control arm bolts provide easy installation, and each set includes corrosion-resistant coated T-bolts and matching nuts.

5.0 out of 5 stars ( 1 )

$29.95

Helix High-Impact Control Arm Bushings

Revive your ride's suspension with Helix high-impact control arm bushings. Available for upper and lower control arms, each bushing feature steel and high-grade rubber construction to perform efficiently. Select the one(s) needed for your vehicle.

Not Yet Reviewed

$42.50

Helix Front Tubular Control Arms and Coilover Conversion Kits

Helix front tubular control arms and coilover conversion kits are a precision balance of ride comfort, performance, and maximum road adhesion. You'll immediately feel the difference with Helix coilovers—with reduced body roll in corners, nose drive and squat when accelerating. The springs are manufactured from the highest quality spring steel available, using state-of-the-art equipment and the latest technology. Kits are available for a wide range of big block and small block applications spanning more than a half-century.

Not Yet Reviewed

$999.95

—

$1,495.50

Helix Mustang II IFS Suspension Packages

Helix Mustang II IFS suspension packages and kits will give your car or truck the excellent handling of independent suspension with added stopping power! IFS kits come in many different configurations with the necessary components and hardware. And with over a thousand kits to choose from, they are sure to have what you need to fit your wants and budget. From complete systems with chrome columns to their Stage 1 kits that allow you to use off-the-shelf components to complete your setup, and everything in between, Helix has the Mustang II IFS systems and kits to revolutionize your vehicle's suspension.

2.35 out of 5 stars ( 17 )

$799.95

—

$4,299.95

Helix CornerKiller IFS Suspension Packages

Helix CornerKiller IFS front suspension will revolutionize your suspension and give your car or truck the ride and handling it deserves. Each front suspension is specially designed to give your classic ride modern handling and stopping power by updating all of the critical parts. Helix starts with precision-made components that are designed to work together. Tubular control arms provide the adjustability you need to setup the suspension for your car, while your choice of standard to 2 in. drop spindles help you customize the stance. Topping off the spindles is a set of 11 in. disc brakes to provide extra stopping power. Rack and pinion steering is provided by either power assist or manual racks. Finally choose between coilovers for maximum handling and a static stance or air struts for the ultimate in ride height control and ride quality. Bring your classic ride into modern days with a Helix CornerKiller IFS front suspension package.

3.0 out of 5 stars ( 3 )

$2,699.95

—

$4,449.95

Helix Rear 4-Bar and Coilover Conversion Kits

Helix offers rear 4-bar and coilover shock conversion kits for a wide range of applications—including many Buick, Chevrolet, Oldsmobile, and Pontiac cars and trucks from the 1960s and '70s. These suspension kits are a precision balance of ride comfort and maximum road adhesion. You'll immediately feel the difference with Helix coilovers with reduced body roll on corners, nose drive, and squat when accelerating. The springs are manufactured from the highest quality spring steel, using state-of-the-art equipment and the latest technology available. The coilover springs are available in different spring rates. Improve performance without compromising consistency and durability. Order the kid recommended for your vehicle. Additional details: * Style: 4 bar and coilover shock kit * Valving: Performance street * Finish: Black * Upper coil style: Pigtail * Adjustable: Uppers – Yes; lowers – no * Material: Heavy-duty Hardened Steel * Shock finish: Polished * Shock color: Silver * Charged: Nitrogen * Upper mounting: Spike * Lower mount: Stud Plate * Style: Triangulated * Bushings: Polyurethane * Installation: Bolt-on * Tubing: 2x3 lowers and 1.5 in. uppers * Hardware: Included * Instructions: Included

Not Yet Reviewed

$995.95

—

$1,495.95

Helix Steering Boxes

Helix's steering boxes use state-of-the-art CAD/CAM technology to ensure the quickest and smoothest steering on the market. If you are looking to upgrade the steering system of your vehicle to make the most out of your vehicle's performance, go with high-grade steering parts from Helix that are engineered to be second to none when it comes to exceeding original equipment specifications. Be a turn ahead of pack with Helix steering boxes.

Not Yet Reviewed

$389.95

Helix Heavy-Duty Ball Joint Housing Rings

Helix heavy-duty ball joint housing rings help simplify the task of building your custom suspension. These steel rings are designed to work with the Helix thread-in heavy-duty ball joints. They can be used to modify a stock-style control arm or for a complete custom build.

Not Yet Reviewed

$39.95

Helix Coilover Conversion Kits

Helix's coilover conversion kits are a precision balance of ride comfort and maximum road adhesion. You will immediately feel the difference with Helix coilovers with reduced body roll in corners, nose drive and squat when accelerating. The Helix springs are manufactured from the highest quality spring steel available. Helix uses state-of-the-art equipment using the latest technology producing what they call the best spring available anywhere. So if you're ready to improve the performance and ride comfort of your vehicle, you can do it with Helix's entire coilover spring setups without compromising consistency and durability. Order the coilover kit for your application needs.

Not Yet Reviewed

$1,374.50

Page 1 of 1