Availability
Heatshield Products Lava Tube is thermal barrier sleeving that will protect your sensitive components. The specially formulated material is a fibrous thermal weave made from volcanic rock. The basalt fiber guards against continuous temperatures of 1,200 degrees F and intermittent temperatures of 2,000 degrees F. It is also extremely durable against abrasions and chemical exposure. Lava Tube features a high performance carbon fiber look and has been designed with a special Velcro® fastening system, allowing you to install it without removing, moving, or disassembling parts. It is available in four diameters ranging from 1/2 in. to 1 1/2 in., and in 3 ft. or 10 ft. long rolls. Reflect and dissipate heat away from your hoses, lines, wiring, and more with Heatshield Lava Tube sleeving.
( 34 )
$15.99
—
$18.99
Dress up your hot rod with an old-school look, but with modern heat shield technology, by using Heatshield hot rod sleeves. The special weave of these thermal sleeves allows them to expand and contract over fittings and terminals. They're capable of withstanding 1,100 degrees F continuous and are non-flammable. They're perfect for shielding fuel lines, helping to stop vapor lock and protect sensitive wire looms from close proximity heat, shield brake lines and hoses, and stop clutch cables from melting. Do you have a custom build ahead of you? You'll want to use Heatshield hot rod sleeves.
( 147 )
$14.99
—
$21.99
Heatshield Products Thermal-Tie locking ties are a great way to fasten any type of high-temperature insulation. These easy-to-use stainless steel ties work just like plastic wire ties, with no sharp edges! Their low-profile design is great for tight-fitting areas. Heatshield Products Thermal-Tie locking ties are offered in a choice of widths and lengths to meet your fastening needs.
( 28 )
$16.99
—
$23.99
Sealing the ends of any heat shield sleeve can improve the efficiency and prevents hot air from working its way in between the hose or wire. Heatshield Products HP shrink tubing comes in various lengths and diameters to fit your application. It's a great alternative to zip ties and tape—and provides a clean, tight seal and professional look. This HP shrink tubing is very flexible, made of polyolefin material, with a 3:1 shrink ratio. It meets all AMS- DTL-23053/5C, UL and CSA specifications. Order the sizes and quantities needed for your project.
( 7 )
$19.99
Heatshield Products stealth sleeves are designed to protect wiring looms and prevent vital fluids from overheating. Well-suited to be installed on hoses, lines, and wire harnesses without disassembly like a slip-on heat sleeve, these stealth sleeves have a rugged lava rock fiber construction with back coating and feature a hook-and-loop seam that allows I.D. to be adjusted. These sleeves are capable of withstanding 1,200 degrees F continuous, and are ideal for proximity heat, as they do not need a full 1 in. air space from heat source like reflective heat sleeves. Simply rotate the seam away from the heat source to ensure lasting heat protection. These stealth sleeves are available in different lengths and diameters, so trimming the sleeve is unnecessary. Order the application you require.
( 5 )
$16.99
—
$19.99
Heatshield Products' Hot Rod Split Sleeve self-closing sleeves include their HP Racer's Tape to provide protection with a vintage OEM look. They are great to keep wiring, lines, and hoses hidden and protected from abrasion, chemicals, and heat, all while giving your engine bay a clean, tidy appearance. Available in several lengths and diameters, Heatshield Hot Rod Split Sleeve is capable of withstanding up to 300 degrees F, is flame-retardant, and abrasion- and chemical-resistant. Select the length(s) and diameter(s) needed.
( 1 )
$16.99
—
$21.99
Thermaflect tape by Heatshield Products helps shield fuel lines, brake lines, wire looms, and more from radiant heat—making it ideal for quick "on the go" heat problems. This reflective heat shield tape cuts easily and can be used to insulate components without disassembly or to hold other thermal insulation in place. Plus, installation is a breeze with the Heatshield high-temperature self-adhesive backing that sticks to any clean surface. Help your ride stay cool with an assist from the Heatshield Products Thermaflect tape products best suited for your application!
( 27 )
$21.99
Heatshield Products offers Cool Foil tape for use on heavy-duty applications. This lightweight thermal insulating tape reflects radiant heat away from lines, wires, cables, and more. Plus, you can use it to insulate components without disassembly or to finish off other forms of thermal insulation to prevent fraying. Economical compared to other forms of heat-protective tape, Heatshield Products Cool Foil tape cuts easily and features a self-adhesive backing that sticks to almost any clean surface.
( 6 )
$16.99
Heatshield Products HP Edge Armor is flexible PVC panel edging protectors that can be used to guard your hoses, wires, and hands against possible sharp edges where panels are exposed. Available in 5 or 10 ft. rolls, select the length needed. Features: * Compatible with panel thicknesses from .039 in. to .079 in. * Flexible black PVC * Can be used on holes larger than 2 in. * Great to dress up engine bay or trim around trunk or hood area * Can be used around bends and curves * Rated at 220 degrees F
Not Yet Reviewed
$14.99
Heatshield Products exhaust heat shield thermal springs can be used to hold your turbo heat shield or manifold shield in place. Constructed of 302 stainless steel they are rugged, able to handle high heat, and are high-strength! All you need are needle nose pliers to stretch the spring onto the lacing hook.
Not Yet Reviewed
$12.99
Insul-Boot heat shields from Heatshield Products have double-wall construction for superior protection. They help prevent misfires caused by plug-wire burnout that could lead to critical engine damage and loss of performance. The Insul-Boots are available in a range of color choices. Their special heat coatings help reflect and dissipate heat to protect your expensive plug wire sets, and their versatile design allows them to fit most boots, even 90 degrees. For reliable heat protection, choose Heatshield!
( 34 )
$19.99
Cure your LS Series spark plug boot blues with Heatshield Lava boot shields. These boot shields feature a no-fray cuff with flexible dual-wall, high-temperature basalt sleeving. The tightly braided basalt has a 1,200 degree F working temperature to ensure first-rate protection from plug and wire burnout, even in the most demanding applications. In addition, the shields' universal design fits most boots, even 90 degree. So, get them and use them to reflect and dissipate heat!
( 6 )
$21.99
Black exhaust wrap by Heatshield Products insulates your headers and exhaust pipes to retain heat. This action decreases the density of exhaust gases, allowing them to exit your exhaust system sooner (exhaust scavenging), helping to lower intake temperatures and increase horsepower! This stuff reduces radiant heat damage and can lower underhood temperatures by as much as 50 percent with a proprietary black coating that holds its color longer than similar graphite coated wraps. You can fasten Heatshield Products black exhaust wrap with thermal ties, hose clamps, or wire.
( 7 )
$19.99
A great partner for your cool Heatshield Products is their HP Tie Wire! Able to wrap easier than locking ties, these high-temperature fasteners secure your shields with a clean, more professional look. Made from 0.032 in. thick 600 Inconel wire, they can sustain hostile high-heat environments and still keep your insulation in place. They are available in two different spool lengths. Fasten your header, exhaust, and turbo wraps, shields, and custom jackets with Heatshield Products HP Tie Wire.
( 5 )
$16.99
Heatshield Products License Plate Shields are anti-scratch pads that protect paint on new cars and custom builds from scratching and rattling. A loose and rattling license plate can cause scratches on the paint or chrome of your vehicle. Prevent scratches and eliminate rattling with these innovative license plate shields. Made from a proprietary 0.15 in. thick foam, the shields are weather- and UV-resistant. Installing Your License Plate Shield: To install your license plate anti-rattle shield and start protecting your vehicle, you will need to remove the license plate with a screwdriver, clean the surface of the plate and your car with appropriate degreasers, and dry them to remove any residue. Once completely dry, fit the license plate shield to your vehicle, taking care not to cover the holes where the screws will go. Then, screw the license plate back onto your vehicle. You might also wish to wax the paint on your car before returning the license plate to its place.
Not Yet Reviewed
$13.99
Protect your ride from exhaust heat with the help of Heatshield Products and their exhaust wraps. They help keep heat inside of your exhaust system, where it can promote better flow and increased scavenging effects. The reduced heat also aids in keeping the driver's compartment cooler and reducing temperatures under the hood, lowering intake air temperatures, and allowing your car to make more power. These wraps feature a fiberglass yarn that is water and fungus-resistant, and they include a vermiculite coating that protects them up to 1,200 degrees of continuous heat and 2,000 degrees intermittent. Protect your ride and everything inside from excessive heat with the available selection of Heatshield Products exhaust wraps best suited for your application.
( 6 )
$21.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
