Haltech ECUs & Engine Management Systems

If you’re serious about squeezing every drop of performance from your ride, Haltech engine management calibration technology is built to get you there! Since 1986, the...

If you’re serious about squeezing every drop of performance from your ride, Haltech engine management calibration technology is built to get you there! Since 1986, the real-time engine management pioneers at Haltech have been helping automotive enthusiasts and racers achieve peak performance from the drag strip, to the road course, to the street. Whether you’re tuning a hot rod or customizing your daily driver, the company’s gear plays it clean and legal with gear made for on-road, off-road, and sanctioned competition use. Summit Racing carries a variety of Haltech ECU kits, universal plug-and-play systems, digital displays,...

Individual Parts

Part Groups

Results 1 - 24 of 57

Haltech Bulk Battery Cables

Haltech offers a wide range of automotive electrical components, including bulk battery cables. These 1AWG replacement cables are available separately in red (positive) and black (negative). Order the lengths you need.

Not Yet Reviewed

$25.00

Haltech Terminated Battery Cables

Haltech offers a wide range of automotive electrical components, including a variety of battery cables. These 1AWG cables are pre-terminated with SurLok connectors—and are used to connect the battery to the Nexus RS ECU. The cables are available in multiple lengths.

Not Yet Reviewed

$239.00

—

$329.00

Haltech Elite USB Waterproof Extension Cables

Haltech Elite waterproof USB extension cables provide the extra length needed for your connections and includes a cap to prevent the ingress of water. These Type B waterproof cables are compatible with Elite Series ECUs (except Pro Plug-in) and offer 8 ft. or 2.4m of length.

Not Yet Reviewed

$57.00

Haltech Elite CAN DTM-4 Extension Cables

Haltech Elite CAN DTM-4 extension cables are used for connecting CAN devices in off-road and competition vehicles that aren't emissions controlled. Available in several lengths, Elite CAN cables reduce wiring, electronic interference, and offer high-speed network communication. They are resistant to abrasions and cuts, while also having an excellent resistance to oil and chemicals. Select the length needed.

Not Yet Reviewed

$47.00

—

$62.00

Haltech Multi-Function CAN Gauge Extension Cables

Haltech multi-function CAN gauge extension cables provide the extra length needed for connection. The cables are 5 ft. long.

Not Yet Reviewed

$31.00

Haltech iC-7/uC-10 Dash to OBDII CAN Cables

Haltech iC-7/uC-10 Dash to OBDII CAN cables allow the dashes to display the data obtained from the vehicles OBD II system in real time. Available in two lengths, select the one needed for your vehicle.

Not Yet Reviewed

$47.00

Haltech CAN Cables

Haltech CAN cables reduce wiring, electronic interference, and offers high-speed network communication. These 8-pin to 8-pin Tyco connectors are available in white or black and the harnesses are available in many lengths. Choose the length you need.

Not Yet Reviewed

$35.00

—

$55.00

Haltech DTM-4 Power Supply Cables

Haltech's DTM-4 power supply cables allow +12 V to be sourced from a +12 V switched supply within the vehicle wiring harness for powering up the Haltech CAN wideband. The DTM-4 power supply cable was included in the WB1 and WB2 kits and conveniently offered separately.

Not Yet Reviewed

$47.00

Haltech GaugeART CAN Cables

Haltech GaugeART CAN cables have direct plug-and-play compatibility with a Platinum Pro plug-in, Sport, or Sprint ECU. Also multiple CAN device installation using a Platinum 3 or 6-port CAN hub.

Not Yet Reviewed

$47.00

Haltech Multi-Function CAN Gauge Daisy-Chain Cables

Haltech multi-function CAN gauge daisy-chain cables assist with connecting a series of gauges to monitor multiple data at the same time.

Not Yet Reviewed

$40.00

Haltech Tyco CAN Dash Adaptor Cables

Haltechs Tyco CAN dash adaptor cables are used to connect a Haltech ECU (Electronic Control Unit) to a compatible aftermarket dash display, like a Haltech IQ3 Street dash, via the CAN (Controller Area Network) communication protocol. These data acquisition accessories allow for direct plug-and-play integration between the ECU and the dash for displaying vital vehicle data without the need for additional wiring or adapters; essentially, it acts as a bridge between the ECU's CAN bus and the dash's CAN input, enabling seamless data transfer. Eliminate the need for complex wiring setups to connect the ECU to the dash with Haltech's dash adaptor cables.

Not Yet Reviewed

$45.00

Haltech uC-10 Digital Display Dashes

Haltech uC-10 digital dash displays offer crisp, clear, and full color viewing compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. They can also be wired in as a complete standalone unit. The versatility of the uC-10 dashes ensures they can seamlessly integrate into a wide range of vehicles and setups, while offering plenty of scope for sensors and other inputs in a standalone configuration or as an I/O expander in a Haltech environment. Each kit includes dash, connector, cables, momentary switches, and Wi-Fi antenna, along with a Haltech fabric key tag, quick-start guide, and stickers. Features: * Full-color, optically bonded TFT screen * 70-degree minimum viewing angle (vertical and horizontal) * 1280 x 480 resolution, 600+ lumens * IP64 (Dust-tight and protected against water splashes) * 6-digit odometer * 512MB of on-board looped data logging * NSP compatible * 10 user configurable AVIPs * 4 user configurable DPOs * 4 user configurable SPIs * 1 dedicated tachometer input * 1 dedicated alternator excite * 2 ambient light sensors

5.0 out of 5 stars ( 1 )

$1,995.00

Haltech Rebel LS Gen 3 and 4 ECU Kits

Haltech's Rebel LS ECU kits provide the most cost-effective, easy-to-install, start-up and drive aftermarket ECU experience. Designed for Gen 3 or 4 LS engines, the all-in-one kit concept simplifies your purchase decision, eliminating the need for costly additional accessory purchases. Each kit arrives with a Rebel ECU, main engine harness and adapter harnesses for throttle, injectors, T56 transmission, (DBW -Gen 4) or (cable throttle and IAC – Gen 3) alternator, knock sensor, existing GM MAP, oil pressure sensors, along with a Bosch O2 and air temp sensor with weld bungs. Installation is a breeze, using a labeled and pre-terminated drop-in harness, which easily connects to existing factory LS sensors. Engine start-up is made easy through the Setup Wizard in the Haltech NSP software and the soon-to-be-released Haltech Connect app. Answer six questions – LS Engine type, cam, throttle body, MAP, injectors and coils with the Wizard prompting a throttle calibration and system check, ensuring an engine that will quickly start, idle and drive. Drivability is continually improved with Haltech's advanced self-learning while additional tuning for your N/A, turbocharged, supercharged or nitrous LS is achieved through Haltech's NSP software. Finally, the Rebel LS ECU kit is compatible with Haltech's plug-and-play CAN accessories, such as the iC-7 dash, keypads, PDM, EGT, wideband and flex-fuel sensors.

5.0 out of 5 stars ( 4 )

$1,495.00

Haltech Harness Sleeve Packs

Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These wiring sleeve packs will protect your various cables and give your harnesses a professional look. Kit includes: * Nylon sleeves: 6mm x 10m, 8mm x 5m, 14mm x 2m, 25mm x 1m * Heatshrink glue-lined sleeves: 8mm x 1.2m, 12mm x 0.6m, 19mm x 0.3m, 35mm x 0.12m * Cable ties: Small (100mm) x 20, Medium (200mm) x 10 * Fleece Tape: one roll

4.0 out of 5 stars ( 1 )

$42.00

Haltech Nexus Rebel LS Throttle Adapter Harnesses

Haltech Nexus Rebel LS throttle adapter harnesses are offered in several styles to join the throttle connector on the Nexus Rebel LS main terminated harness to a 6- or 8-pin LS DBW throttle, or to a cable-operated GM LS throttle body with a TPS and an IAC valve. Choose the proper cable for your setup.

Not Yet Reviewed

$28.00

Haltech Laser Ride Height Sensors

Ideal for drag racing, the Haltech laser ride height sensors control wheelies by measuring the distance from the sensor to the ground and feeding that information to the ECU. You can then set up a maximum lift distance and map the ignition and fuel against the front-end lift and the road speed. When the front end lifts, the ECU will start cutting ignition or fuel or both. Once the front end comes down and contacts the ground the ECU restores the fuel and ignition to its original setting. These kts include connection cable, matching male Deutsch DTM-3 connector, protective glass lens, and setup guide.

Not Yet Reviewed

$860.00

Haltech Elite CAN Adapter Harnesses

Haltech offers a wide range of wiring components for automotive performance applications, including this Elite CAN adapter harness. Haltech Elite CAN cables are available in many lengths to connect DTM-4 to DTM-4, 8-pin Tyco, or OBDII, or a DTM4 receptacle to 16-pin Tyco. Choose the proper connectors and length needed.

Not Yet Reviewed

$36.00

—

$60.00

Haltech CAN Adapter Looms

Haltech CAN adapter looms are used to connect supported Haltech products to the different CAN ports/pins on specific ECU, offering quick installation of your CAN-based accessory. They are available in several configurations. Choose the appropriate adapter loom according to the wiring diagram specific to your ECU.

Not Yet Reviewed

$52.00

Haltech iC-7 Color Display Dash

Haltech offers a variety of data acquisition components, including the iC-7 Color Display Dash. With a crisp, clear and full color display, this unit lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading perks in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-color shift light bar, and more, the iC-7 connects directly to all current Haltech ECUs via a CAN network. * Ideal replacement for individual analog gauge clusters * Easy to install and configure * User-adjustable brightness control with automatic dimming * User-configurable channels, units and alarms * 14 programmable, 7-color shift light LEDs * Controlled via easily accessible, face-mounted control buttons * Configuration via Haltech iC-7 software and USB cable * Suits: All current Haltech ECUs via CAN. Also Plug-and-Play compatible with the following aftermarket ECU brands: Link, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred series (M400,600,800 gold box ECUs), Syvecs. * Includes: Haltech iC-7 Display Dash, 34 Pin main connector harness (including spare pins for input wiring), DTM-4 to DTM-4 CAN extension cable, USB to M5 right angle cable, USB Cable, Mounting Screws, USB flash drive with iC-7 Software, Quick Start Guide, Haltech stickers and a fabric keyring tag * Notes: OBD-II and Stand-alone versions also available.

Not Yet Reviewed

$1,099.00

Haltech Single Channel CAN O2 Wideband Controller Kits

Haltech Single Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. The kits are available in different models: -- Suits: BOSCH LSU 4.9 SENSOR * Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs. -- Suits: NTK SENSOR * Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: Best product for methanol powered vehicles

5.0 out of 5 stars ( 2 )

$355.00

—

$550.00

Haltech iC-7 OBD-II Color Display Dash

Haltech offers a variety of data acquisition components, including the iC-7 OBD-II Color Display Dash. With a crisp, clear and full-color display, this unit lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading perks in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-color shift light bar, and more, the iC-7 connects directly to all current Haltech ECUs via a CAN network. The OBD-II iC-7 is preconfigured to connect directly (via CAN) to most late model vehicles (appx. 2008-on) using the factory OBD-II port. * Ideal replacement for individual analog gauge clusters * Easy to install and configure * User-adjustable brightness control with automatic dimming * User-configurable channels, units and alarms * 14 programmable, 7-color shift light LEDs * Controlled via easily accessible, face-mounted control buttons * Configuration via Haltech iC-7 software and USB cable * Suits: Preconfigured to connect directly (via CAN) to most late model vehicles (appx. 2008-on) using the factory OBD-II port * Includes: Haltech iC-7 Display Dash, 34 Pin main connector harness (includes spare pins for input wiring), OBD-II to DTM-4 CAN cable, USB to M5 right angle cable, USB Cable, Mounting Screws, USB flash drive with iC-7 Software, Quick Start Guide, Haltech stickers and a fabric keyring tag

Not Yet Reviewed

$1,110.00

Haltech CAN 15 Button Keypads

With 15 soft touch, ergonomically designed buttons, the Haltech CAN keypad is easy to configure and use. It's a plug-and-play control solution for your Haltech system. The keypad is suitable for NEXUS and Elite devices only; not compatible with Platinum or earlier ECUs. Includes: 15-Button Keypad (3x5), Adaptor Harness DT-4 to DTM-4, DTM to DTM Cable -1200mm, Label Set, Mounting Nut and Washer Kit

Not Yet Reviewed

$435.00

Haltech Elite 4-Port CAN Hubs

Haltech Elite 4-port CAN hubs instantly integrate into your Haltech system. These plug-and-play units allow you to expand the functionality of your ECU by permitting the connection of multiple CAN-based expansion devices. Each CAN hub includes a 300mm direct connection cable to link the CAN hub to an Elite Series ECU, and two or more hubs can be connected together.

Not Yet Reviewed

$125.00

Haltech TCA-8 Eight Channel Thermocouple Amplifiers

Haltech's vast array of data acquisition components includes the TCA-8 Eight Channel Thermocouple Amplifier--a direct plug-and-play, compatible with a NEXUS VCU, an Elite ECU CAN port, Elite ECU harness, CAN connector, or multiple CAN device installation using an Elite 4 Port CAN HUB. * Includes: Eight Channel Thermocouple Amplifier, CAN cable, DTM-4 to Circular Connector Cable 1200mm / 4-ft., Quick Start Guide * Suits: Elite and NEXUS Series ECUs only

Not Yet Reviewed

$549.00

Page 1 of 3
Next