Availability
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement pressure sensor extension parts are made from high-quality materials and designed to factory specs to ensure proper fit and function. * Suits: 1/8 in. NPT thread MAP, oil and fuel pressure sensors * Includes: Fragola -4 AN braided stainless steel 18 in. hose with male and female 1/8 in. NPT adapters and rubber insulated P-clamps
Not Yet Reviewed
$36.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These wiring sleeve packs will protect your various cables and give your harnesses a professional look. Kit includes: * Nylon sleeves: 6mm x 10m, 8mm x 5m, 14mm x 2m, 25mm x 1m * Heatshrink glue-lined sleeves: 8mm x 1.2m, 12mm x 0.6m, 19mm x 0.3m, 35mm x 0.12m * Cable ties: Small (100mm) x 20, Medium (200mm) x 10 * Fleece Tape: one roll
( 1 )
$42.00
Haltech offers a variety of data acquisition components and accessories to facilitate automotive performance and engine management. These weld-on fitting kits enable you to make secure connections when plumbing key paths for the data streams. The 1/4 in. fittings are machined from mild steel or stainless steel and include a nut and ferrule. Weld-on bungs/fittings and brass nut/ferrule are also available separately. Note: Compression ferrules are single use and must be replaced when replacing probes.
Not Yet Reviewed
$21.00
Haltech Nexus Rebel LS throttle adapter harnesses are offered in several styles to join the throttle connector on the Nexus Rebel LS main terminated harness to a 6- or 8-pin LS DBW throttle, or to a cable-operated GM LS throttle body with a TPS and an IAC valve. Choose the proper cable for your setup.
Not Yet Reviewed
$28.00
Haltech Nexus Rebel LS oil pressure sensor adapter harnesses convert the oil pressure sensor connector on the Rebel LS main terminated harness from an early style/Gen III to a Gen IV connector.
Not Yet Reviewed
$24.00
Haltech wideband adapter harnesses are used to integrate wideband sensors to your Nexus Series harnesses and ECUs. The adapter harnesses are terminated with a DTM6 plug to either a Bosch LSU 4.9 or NTK connector. The flying lead adapter harness is terminated with a DTM6 receptacle to AMP Superseal pins and should be used in conjunction with the Haltech LSU 4.9 or NTK adapter harness and hardware packs. Select the correct harness(es) to suit your wideband sensor and Nexus device.
Not Yet Reviewed
$31.00
Haltech Nexus Rebel LS knock sensor adapter harnesses convert the two Gen IV knock sensor connectors on the Rebel LS main terminated harness into a single plug, used in Gen III LS engines.
Not Yet Reviewed
$24.00
Haltech Nexus Rebel LS pedal adapter harnesses are designed to connect the Accelerator Pedal Position (APP) connector on the Nexus Rebel LS main terminated harness to a Corvette or Bosch pedal for Drive By Wire (DBW) throttle control. Additionally, the adapter includes a wire for connecting the Rebel LS VCU to a brake pedal switch as part of the DBW control safety system. Choose the kit for your pedal.
Not Yet Reviewed
$49.00
For your Haltech ECU there are several wiring and connectivity accessory choices. Their TYCO plug and pin connector sets are available with different plug arrangements along with the quantity of pins needed. Choose the plug and pin kits needed for your ECU connections.
Not Yet Reviewed
$36.00
Haltech Nexus Rebel LS MAP sensor adapter harnesses convert the MAP sensor connector on the Rebel LS main terminated harness from an early- style/Gen III to a modern Gen IV connector.
( 1 )
$24.00
Haltech offers a wide range of wiring components for automotive performance applications, including this Elite CAN adapter harness. Haltech Elite CAN cables are available in many lengths to connect DTM-4 to DTM-4, 8-pin Tyco, or OBDII, or a DTM4 receptacle to 16-pin Tyco. Choose the proper connectors and length needed.
Not Yet Reviewed
$47.00
Haltech offers a wide range of wiring components for automotive performance applications, including this CAN adapter harness. It's used to adapt a Platinum Series ECU to an Elite DTM-4 CAN system. * CAN Adapter cable DTM-4 female receptacle/socket to 8 pin black Tyco
Not Yet Reviewed
$47.00
Haltech CAN adapter looms are used to connect supported Haltech products to the different CAN ports/pins on specific ECU, offering quick installation of your CAN-based accessory. They are available in several configurations. Choose the appropriate adapter loom according to the wiring diagram specific to your ECU.
Not Yet Reviewed
$26.00
Haltech Nexus Rebel LS T56 transmission adapter harnesses connect the transmission breakout connector on the Rebel LS main terminated harness to a T56 transmission vehicle speed sensor.
Not Yet Reviewed
$24.00
Haltech SurLok connectors are available in red or black options for connection of battery cables to your Haltech Nexus R3 and R5 ECUs and PD16 power distribution modules. The SurLok 120 amp connectors crimp to 4 AWG battery cable for R3 and PD16 units, while the SurLok 200 amp connectors suit the Nexus R5 for connection to 1 AWG battery cables. Select the individual red or black Haltech SurLok or the pair designed to work with your ECU or module.
Not Yet Reviewed
$36.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
