Availability
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement Haltech sensors are used to measure fluid pressure and temperature. Available in different psi ranges, each sensor includes matching plug and pins, and is individually electronically tested before packaging. Select the psi needed.
Not Yet Reviewed
$160.00
Haltech offers a wide range of data acquisition components, including this GPS Speed Input Module for applications that require a digital speed signal. It also includes a GPS antenna matching male DTM-3 connector and pins. * Notes: Calibration: 5000ppk (5000 pulses per km), Use with SPI or DPI ECU inputs, GPS update rate 10Hz, high accuracy 0.3 percent deviation, pulse compensation in tunnel, anti-GPS drift technology.
( 1 )
$130.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. Their "TI" pressure sensors for fuel/oil/wastegate are designed for remote mounting (not mounted directly into the fuel rail or engine block)—and connected via a flexible hose. They are individually electronically tested before packaging, available in different psi ratings, and include matching plug and pins, along with a -4 AN adapter. Select the Haltech "TI" pressor sensors with the psi needed.
( 1 )
$200.00
—
$205.00
For boost control select a Haltech solenoid. Available in a 3-port or a 4-port model that control a wider range of boost pressure, each includes hose fittings, rubber isolated mount, and matching DTM 2 plug and pins set. Both are compatible with Haltech ECUs. Select the boost control solenoid desired for your setup.
Not Yet Reviewed
$130.00
—
$145.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement wideband oxygen sensors are built to fit and function just like the originals. They're designed for use with a wideband controller or gauge. The 02 sensors are available in different models: * Model 010712: Modified NTK LZA08-H5 Suits NEXUS Series devices and used with NTK compatible wideband controllers to measure Lambda Notes: Genuine NTK sensor modified by Haltech to improve sensor longevity and accuracy at extremely rich air to fuel ratios by the addition of a thin walled spring steel radial shroud at the sensor tip. * Model 010714: Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector * Model 010718: Bosch LSU 4.9 Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with factory calibration resistor connector (not a Deutsch DT-6 connector)
( 1 )
$130.00
—
$180.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. This replacement flex fuel sensor is built to fit and function just like the original part. It measures the ethanol-gasoline ratio of the fuel being used in your flexible fuel vehicle. * Suits: 3/8 in. "GM Spring Lock" fittings * Includes: Matching plug and 3 pins
Not Yet Reviewed
$205.00
Haltech Elite 4-port CAN hubs instantly integrate into your Haltech system. These plug-and-play units allow you to expand the functionality of your ECU by permitting the connection of multiple CAN-based expansion devices. Each CAN hub includes a 300mm direct connection cable to link the CAN hub to an Elite Series ECU, and two or more hubs can be connected together.
Not Yet Reviewed
$125.00
Haltech Bosch DBW pedal assemblies include plugs and pins. Used to provide pedal position information to the ECU, these drive-by-wire pedal assemblies are for use with an electronic throttle body and an ECU that supports DBW throttle control. Features: * 16-Degree (70mm) travel * Firewall-mounted hanging design * Dual Potentiometer redundancy * Includes mating connector set
Not Yet Reviewed
$135.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement idle air control kits include a billet 2-port housing with 2-screw style motor. They're built to fit and function like the originals. Matching plugs and pins are included.
Not Yet Reviewed
$185.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These Genuine Bosch knock sensors use a 5/16 in. mounting bolt, and include matching plug and two pins. Knock sensors detect pre-ignition and detonation, an irregular knocking vibration of the engine which could potentially be damaging. Sensors are in place to contribute to the improvement and fuel economy of engine performance.
Not Yet Reviewed
$110.00
Haltech wideband hardware packs include the oxygen sensor, adapter harness, and weld-in bung to plug-and-play with a Nexus Series harness. Select the pack for LSU 4.9 or NTK.
Not Yet Reviewed
$180.00
—
$215.00
Ideal for racers and most commonly used as shock travel sensors, Haltech linear position sensors can also be used to measure gearbox shaft position, differential angle, or in any application that requires linear position data. In short, these simple sensors can make your ride not just faster but also more predictable. Used as shock travel sensors, these data acquisition components can measure and log the speed and distance of your shock's compression, extension, rebound, etc. to give you an accurate picture of how the vehicle reacts to the track surface and changes. They remove the guesswork from chassis tuning. Armed with this information, you can significantly cut down on testing and adjusting, saving not just time but wear and tear on your vehicle. Linear position sensors are available in 1/2 in. and 1 in. models for 100mm through 250mm applications.
Not Yet Reviewed
$115.00
—
$199.00
Plug-and-play with Haltech Nexus Rebel LS injector sub-harnesses. Several options are available to allow you to connect eight injectors with EV1, EV6, or Multec 2 connectors to the injector breakout connector on the Nexus Rebel LS main terminated harness. Choose the proper harness for your connections.
Not Yet Reviewed
$135.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement MAP sensors are built to fit and function just like the original parts. The manifold absolute pressure sensor is one of the sensors used in an internal combustion engine's electronic control system. Engines that use a MAP sensor are typically fuel injected. The MAP sensor provides instantaneous manifold pressure information to the engine's electronic control unit. The Haltech sensors are available in different styles: * 3 Bar GM MAP Sensor Includes: Matching plug and 3 pins * 4 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001)
Not Yet Reviewed
$105.00
—
$245.00
HalTech offers a variety of data acquisition components, including these iC-7 Moulded Panel Mounts. They're made from UV-stabilized ABS textured black plastic and are designed for the iC-7 Display Dash.
( 1 )
$130.00
For a painless and professional Haltech ECU install, you're going to need the right tools. Whether it's a professional set of crimpers to get you all wired up, de-pinning tools, or heavy-duty hydraulic cable lug crimpers, Haltech has quality tools to assist you with your ECU installation. Haltech HC5 hydraulic crimpers are ideal for crimping SurLok connectors on your Nexus Series VCU. Providing up to 5 US tons of force, the HC5 can precisely crimp a variety of cables, including battery and welding cables, as well as terminal lugs. Additional features: * Eight electroplated crimping dies -- Sizes 4, 6, 10, 16, 25, 35, 50, 70mm) * Hydraulic Rebuild Kit helps increase crimper working life and maintain optimum performance * Molded carry case * Quick Start Guide * Durable black oxide finish protects your crimping tool and prevents marring when swapping dies
Not Yet Reviewed
$130.00
For your Haltech ECU there are several wiring and connectivity accessory choices. Their Superseal plug and pin connector sets provide weather-resistant connections, and are available with different plug arrangements along with the quantity of pins needed. Choose the plug and pin kit needed for your ECU.
Not Yet Reviewed
$136.00
—
$199.00
Haltech R35 ignition coil brackets convert standard coils over to R35 GTR ignition coils. Perfectly suited to Toyota JZ engines, the brackets feature 6061 T-6 billet aluminum construction with an anodized black finish branded with the Haltech logo. They include mounting hardware and Positive Crankcase Ventilation (PCV) block-offs.
Not Yet Reviewed
$204.99
Haltech Nexus R5 VCU tube mounts are the simplest way to mount your R5 VCU to roll bar/cage tubing. Available to fit different tube diameters, the brackets are made from CNC machined 6061 aluminum, and then anodized for a durable black finish. Haltech offers anti-vibration mount kits, too, for your Nexus R5. Select the style and size preferred.
Not Yet Reviewed
$145.00
Haltech offers a wide range of wiring harnesses for automotive performance applications, including this Platinum PRO/Sport GM plug-in auxiliary I/O harness. The replacement harness measures 8 ft. in length (2.5m).
Not Yet Reviewed
$125.00
Haltech Input/Output 12 expander flying lead harnesses suit both the I/O 12 expander box A and box B. Offered with the expanders, the harnesses are conveniently available individually as replacements. They allow you to wire additional inputs and outputs to a Haltech ECU.
Not Yet Reviewed
$125.00
Haltech driveshaft split collars are used in conjunction with a hall effect sensor to enable measuring of driveshaft rpm. They are typically installed to the rear-end yoke or coupler. Haltech 8-magnet pickup split collars are available in several diameters. Select the correct size for your yoke or coupler to ensure proper fitment.
Not Yet Reviewed
$115.00
Haltech analog output adapters convert a 100 percent duty cycle (PWM) signal from an ECU output to a 0 to 5 V analog voltage signal. They are suitable for TPS signal output to an AWD controller or an analog voltage signal for a third party analog gauge, datalogger, or device. Haltech includes a matching set of Deutsch DTM 4 connectors.
Not Yet Reviewed
$110.00
Haltech transmission selector position kits are ideal for racers who want to log and analyze linear position of moving components like suspension travel, steering angle, or gearbox position. The bracket is designed to suit TH400 Reid case transmissions, but may fit other brands/transmissions, and will work with Haltech Elite and Nexus Series ECUs, as well as iC-7 digital displays. They are also compatible with other aftermarket standalone ECUs.
Not Yet Reviewed
$215.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
