Availability
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement wideband oxygen sensors are built to fit and function just like the originals. They're designed for use with a wideband controller or gauge. The 02 sensors are available in different models: * Model 010712: Modified NTK LZA08-H5 Suits NEXUS Series devices and used with NTK compatible wideband controllers to measure Lambda Notes: Genuine NTK sensor modified by Haltech to improve sensor longevity and accuracy at extremely rich air to fuel ratios by the addition of a thin walled spring steel radial shroud at the sensor tip. * Model 010714: Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector * Model 010718: Bosch LSU 4.9 Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with factory calibration resistor connector (not a Deutsch DT-6 connector)
( 1 )
$130.00
—
$180.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement Haltech sensors are used to measure fluid pressure and temperature. Available in different psi ranges, each sensor includes matching plug and pins, and is individually electronically tested before packaging. Select the psi needed.
Not Yet Reviewed
$160.00
Haltech offers a wide range of data acquisition components, including this GPS Speed Input Module for applications that require a digital speed signal. It also includes a GPS antenna matching male DTM-3 connector and pins. * Notes: Calibration: 5000ppk (5000 pulses per km), Use with SPI or DPI ECU inputs, GPS update rate 10Hz, high accuracy 0.3 percent deviation, pulse compensation in tunnel, anti-GPS drift technology.
( 1 )
$130.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. Their "TI" pressure sensors for fuel/oil/wastegate are designed for remote mounting (not mounted directly into the fuel rail or engine block)—and connected via a flexible hose. They are individually electronically tested before packaging, available in different psi ratings, and include matching plug and pins, along with a -4 AN adapter. Select the Haltech "TI" pressor sensors with the psi needed.
( 1 )
$205.00
Haltech Elite 4-port CAN hubs instantly integrate into your Haltech system. These plug-and-play units allow you to expand the functionality of your ECU by permitting the connection of multiple CAN-based expansion devices. Each CAN hub includes a 300mm direct connection cable to link the CAN hub to an Elite Series ECU, and two or more hubs can be connected together.
Not Yet Reviewed
$125.00
Haltech wideband hardware packs include the oxygen sensor, adapter harness, and weld-in bung to plug-and-play with a Nexus Series harness. Select the pack for LSU 4.9 or NTK.
Not Yet Reviewed
$180.00
For boost control select a Haltech solenoid. Available in a 3-port or a 4-port model that control a wider range of boost pressure, each includes hose fittings, rubber isolated mount, and matching DTM 2 plug and pins set. Both are compatible with Haltech ECUs. Select the boost control solenoid desired for your setup.
Not Yet Reviewed
$130.00
Haltech Bosch DBW pedal assemblies include plugs and pins. Used to provide pedal position information to the ECU, these drive-by-wire pedal assemblies are for use with an electronic throttle body and an ECU that supports DBW throttle control. Features: * 16-Degree (70mm) travel * Firewall-mounted hanging design * Dual Potentiometer redundancy * Includes mating connector set
Not Yet Reviewed
$135.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement idle air control kits include a billet 2-port housing with 2-screw style motor. They're built to fit and function like the originals. Matching plugs and pins are included.
Not Yet Reviewed
$185.00
HalTech offers a variety of data acquisition components, including these iC-7 Moulded Panel Mounts. They're made from UV-stabilized ABS textured black plastic and are designed for the iC-7 Display Dash.
( 1 )
$130.00
Ideal for racers and most commonly used as shock travel sensors, Haltech linear position sensors can also be used to measure gearbox shaft position, differential angle, or in any application that requires linear position data. In short, these simple sensors can make your ride not just faster but also more predictable. Used as shock travel sensors, these data acquisition components can measure and log the speed and distance of your shock's compression, extension, rebound, etc. to give you an accurate picture of how the vehicle reacts to the track surface and changes. They remove the guesswork from chassis tuning. Armed with this information, you can significantly cut down on testing and adjusting, saving not just time but wear and tear on your vehicle. Linear position sensors are available in 1/2 in. and 1 in. models for 100mm through 250mm applications.
Not Yet Reviewed
$115.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These Genuine Bosch knock sensors use a 5/16 in. mounting bolt, and include matching plug and two pins. Knock sensors detect pre-ignition and detonation, an irregular knocking vibration of the engine which could potentially be damaging. Sensors are in place to contribute to the improvement and fuel economy of engine performance.
Not Yet Reviewed
$110.00
Plug-and-play with HalTech Nexus Rebel LS injector sub-harnesses. Several options are available to allow you to connect eight injectors with EV1, EV6, or Multec 2 connectors to the injector breakout connector on the Nexus Rebel LS main terminated harness. Choose the proper harness for your connections.
Not Yet Reviewed
$135.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
