Availability
Haltech's Rebel LS ECU kits provide the most cost-effective, easy-to-install, start-up and drive aftermarket ECU experience. Designed for Gen 3 or 4 LS engines, the all-in-one kit concept simplifies your purchase decision, eliminating the need for costly additional accessory purchases. Each kit arrives with a Rebel ECU, main engine harness and adapter harnesses for throttle, injectors, T56 transmission, (DBW -Gen 4) or (cable throttle and IAC – Gen 3) alternator, knock sensor, existing GM MAP, oil pressure sensors, along with a Bosch O2 and air temp sensor with weld bungs. Installation is a breeze, using a labeled and pre-terminated drop-in harness, which easily connects to existing factory LS sensors. Engine start-up is made easy through the Setup Wizard in the Haltech NSP software and the soon-to-be-released Haltech Connect app. Answer six questions – LS Engine type, cam, throttle body, MAP, injectors and coils with the Wizard prompting a throttle calibration and system check, ensuring an engine that will quickly start, idle and drive. Drivability is continually improved with Haltech's advanced self-learning while additional tuning for your N/A, turbocharged, supercharged or nitrous LS is achieved through Haltech's NSP software. Finally, the Rebel LS ECU kit is compatible with Haltech's plug-and-play CAN accessories, such as the iC-7 dash, keypads, PDM, EGT, wideband and flex-fuel sensors.
( 3 )
$1,495.00
HalTech uC-10 digital dash displays offer crisp, clear, and full color viewing compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. They can also be wired in as a complete standalone unit. The versatility of the uC-10 dashes ensures they can seamlessly integrate into a wide range of vehicles and setups, while offering plenty of scope for sensors and other inputs in a standalone configuration or as an I/O expander in a HalTech environment. Each kit includes dash, connector, cables, momentary switches, and Wi-Fi antenna, along with a HalTech fabric key tag, quick-start guide, and stickers. Features: * Full-color, optically bonded TFT screen * 70-degree minimum viewing angle (vertical and horizontal) * 1280 x 480 resolution, 600+ lumens * IP64 (Dust-tight and protected against water splashes) * 6-digit odometer * 512MB of on-board looped data logging * NSP compatible * 10 user configurable AVIPs * 4 user configurable DPOs * 4 user configurable SPIs * 1 dedicated tachometer input * 1 dedicated alternator excite * 2 ambient light sensors
Not Yet Reviewed
$1,995.00
Haltech offers a variety of data acquisition components, including the iC-7 Color Display Dash. With a crisp, clear and full color display, this unit lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading perks in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-color shift light bar, and more, the iC-7 connects directly to all current Haltech ECUs via a CAN network. * Ideal replacement for individual analog gauge clusters * Easy to install and configure * User-adjustable brightness control with automatic dimming * User-configurable channels, units and alarms * 14 programmable, 7-color shift light LEDs * Controlled via easily accessible, face-mounted control buttons * Configuration via Haltech iC-7 software and USB cable * Suits: All current Haltech ECUs via CAN. Also Plug-and-Play compatible with the following aftermarket ECU brands: Link, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred series (M400,600,800 gold box ECUs), Syvecs. * Includes: Haltech iC-7 Display Dash, 34 Pin main connector harness (including spare pins for input wiring), DTM-4 to DTM-4 CAN extension cable, USB to M5 right angle cable, USB Cable, Mounting Screws, USB flash drive with iC-7 Software, Quick Start Guide, Haltech stickers and a fabric keyring tag * Notes: OBD-II and Stand-alone versions also available.
Not Yet Reviewed
$1,195.00
Haltech Single Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. The kits are available in different models: -- Suits: BOSCH LSU 4.9 SENSOR * Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs. -- Suits: NTK SENSOR * Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: Best product for methanol powered vehicles
( 2 )
$375.00
—
$550.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement wideband oxygen sensors are built to fit and function just like the originals. They're designed for use with a wideband controller or gauge. The 02 sensors are available in different models: * Model 010712: Modified NTK LZA08-H5 Suits NEXUS Series devices and used with NTK compatible wideband controllers to measure Lambda Notes: Genuine NTK sensor modified by Haltech to improve sensor longevity and accuracy at extremely rich air to fuel ratios by the addition of a thin walled spring steel radial shroud at the sensor tip. * Model 010714: Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector * Model 010718: Bosch LSU 4.9 Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with factory calibration resistor connector (not a Deutsch DT-6 connector)
( 1 )
$130.00
—
$180.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement Haltech sensors are used to measure fluid pressure and temperature. Available in different psi ranges, each sensor includes matching plug and pins, and is individually electronically tested before packaging. Select the psi needed.
Not Yet Reviewed
$160.00
HalTech's Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications, recommended for engines, EFI conversions, and engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. HalTech has been at the cutting edge of engine management technology since it first opened its doors in 1986. They're well-known for their high horsepower engine management, which complements their array of harnesses and add-ons. Product Overview: * Includes: Elite 2500 ECU with DBW and Race Functions, USB programming cable * Supports 1 to 12-cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position Inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * Now using the new NSP Calibration Software
Not Yet Reviewed
$1,959.00
Haltech offers a variety of data acquisition components, including the iC-7 OBD-II Color Display Dash. With a crisp, clear and full-color display, this unit lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading perks in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-color shift light bar, and more, the iC-7 connects directly to all current Haltech ECUs via a CAN network. The OBD-II iC-7 is preconfigured to connect directly (via CAN) to most late model vehicles (appx. 2008-on) using the factory OBD-II port. * Ideal replacement for individual analog gauge clusters * Easy to install and configure * User-adjustable brightness control with automatic dimming * User-configurable channels, units and alarms * 14 programmable, 7-color shift light LEDs * Controlled via easily accessible, face-mounted control buttons * Configuration via Haltech iC-7 software and USB cable * Suits: Preconfigured to connect directly (via CAN) to most late model vehicles (appx. 2008-on) using the factory OBD-II port * Includes: Haltech iC-7 Display Dash, 34 Pin main connector harness (includes spare pins for input wiring), OBD-II to DTM-4 CAN cable, USB to M5 right angle cable, USB Cable, Mounting Screws, USB flash drive with iC-7 Software, Quick Start Guide, Haltech stickers and a fabric keyring tag
Not Yet Reviewed
$1,195.00
Haltech offers a wide range of data acquisition components, including this GPS Speed Input Module for applications that require a digital speed signal. It also includes a GPS antenna matching male DTM-3 connector and pins. * Notes: Calibration: 5000ppk (5000 pulses per km), Use with SPI or DPI ECU inputs, GPS update rate 10Hz, high accuracy 0.3 percent deviation, pulse compensation in tunnel, anti-GPS drift technology.
( 1 )
$130.00
Haltech Elite 4-port CAN hubs instantly integrate into your Haltech system. These plug-and-play units allow you to expand the functionality of your ECU by permitting the connection of multiple CAN-based expansion devices. Each CAN hub includes a 300mm direct connection cable to link the CAN hub to an Elite Series ECU, and two or more hubs can be connected together.
Not Yet Reviewed
$125.00
Haltech offers a variety of data acquisition components, including this High Output IGN-1A Inductive Coil with Built-In Ignition Module. It includes matching plug and pins.
Not Yet Reviewed
$88.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These "Red" single-channel hall effect sensor components are made from high-quality materials and built to ensure proper fit and function. * Thread: M12 x 1.0 * Suits: Wheel Speed, Crank/Cam etc. * Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)
( 1 )
$88.00
HalTech's vast array of data acquisition components includes the TCA-8 Eight Channel Thermocouple Amplifier--a direct plug-and-play, compatible with a NEXUS VCU, an Elite ECU CAN port, Elite ECU harness, CAN connector, or multiple CAN device installation using an Elite 4 Port CAN HUB. * Includes: Eight Channel Thermocouple Amplifier, CAN cable, DTM-4 to Circular Connector Cable 1200mm / 4-ft., Quick Start Guide * Suits: Elite and NEXUS Series ECUs only
Not Yet Reviewed
$549.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. Their "TI" pressure sensors for fuel/oil/wastegate are designed for remote mounting (not mounted directly into the fuel rail or engine block)—and connected via a flexible hose. They are individually electronically tested before packaging, available in different psi ratings, and include matching plug and pins, along with a -4 AN adapter. Select the Haltech "TI" pressor sensors with the psi needed.
( 1 )
$205.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These 100 amp solid-state electrical relays are useful for high-frequency PWM control of auxiliary injectors, variable-speed fans, or pump control, etc. * Includes: 1K Pull up resistor. Note: Inductive loads must have diode suppression.
( 3 )
$57.00
HalTech offers a variety of engine management systems, including the Elite 2500 ECU with premium universal wire-in harness. Ideal for dedicated race cars, engine swaps and custom wiring jobs, the harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your HalTech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! ECU OVERVIEW: Elite 2500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or HalTech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software * Outputs: Up to 8 injector and 8 ignition * Suits: Recommended for 4, 6, 8-cylinder, Drive-by-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, engines with multiple variable camshafts * Includes: Elite 2500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, molded 6 power circuit fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. USB programming cable and USB Software Key * Notes: Top of the range, two-connector ECU. Ideal for popular late model performance and racing applications.
Not Yet Reviewed
$2,409.00
HalTech wideband hardware packs include the oxygen sensor, adapter harness, and weld-in bung to plug-and-play with a Nexus Series harness. Select the pack for LSU 4.9 or NTK.
Not Yet Reviewed
$180.00
A Power Distribution Module is just like a mechanical fuse and relay box, but smarter. Like a fuse block, it has a main power input and outputs that turn devices on or off, but unlike a conventional fuse block, there are no mechanical contacts and no physical fuses to blow. Haltech PD16 PDMs boast innovative, yet user-friendly technology; designed to integrate seamlessly into your existing Haltech Elite or Nexus engine management system, and ensure safe, dependable power delivery to your vehicle. All the on and off switching is done with solid-state drivers and fuse currents are set digitally by the end-user. Wiring is more intuitive and easier to troubleshoot, and once the power wiring is complete you simply plug the PD16 into the ECU CAN bus and it's automatically recognized on the bus. Haltech PD16 Power Distribution Modules are available with PDM, 120-amp red SurLok connector, USB-C cable and dust cap, and mounting hardware, as well as in kits that will also include either a plug and pin set or a flying lead harness to simplify big wiring jobs. PD16 features: * Ten high side outputs * Two half bridge outputs * Four 25-amp high-current outputs * Eight inputs plus dedicated ignition switch input * Power for ignition switch * Integrated into Haltech CAN bus network * 5 V sensor supply/sensor ground
Not Yet Reviewed
$1,389.00
Haltech Dual Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. * Suits: Bosch LSU 4.9 Sensor * Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, 2 Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs.
Not Yet Reviewed
$550.00
Haltech offers replacement coolant temperature sensors for a variety of applications. They're available in different thread configurations: Model 010300 includes: Matching Delphi plug and pins Model 010302 includes: Matching Delphi plug and pins Model 010304 includes: Matching male Deutsch DTM-2 connector
( 1 )
$52.00
Haltech offers a wide range of automotive parts to service or maintain your vehicle. These replacement air temperature sensors are designed to fit and perform just like the originals. They're available in a variety of fitting styles and sizes for both universal and model-specific applications.
Not Yet Reviewed
$52.00
With 15 soft touch, ergonomically designed buttons, the Haltech CAN keypad is easy to configure and use. It's a plug-and-play control solution for your Haltech system. The keypad is suitable for NEXUS and Elite devices only; not compatible with Platinum or earlier ECUs. Includes: 15-Button Keypad (3x5), Adaptor Harness DT-4 to DTM-4, DTM to DTM Cable -1200mm, Label Set, Mounting Nut and Washer Kit
Not Yet Reviewed
$435.00
Haltech offers a wide range of data acquisition components, including this 12-Position Rotary Trim Module (Boost/Fuel/LGN, etc.). It includes two position decals and a matching set of Deutsch DTM 3 connectors (HT-031014).
Not Yet Reviewed
$82.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement idle air control kits include a billet 2-port housing with 2-screw style motor. They're built to fit and function like the originals. Matching plugs and pins are included.
Not Yet Reviewed
$185.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
