Availability
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement Haltech sensors are used to measure fluid pressure and temperature. Available in different psi ranges, each sensor includes matching plug and pins, and is individually electronically tested before packaging. Select the psi needed.
Not Yet Reviewed
$160.00
Haltech Single Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. The kits are available in different models: -- Suits: BOSCH LSU 4.9 SENSOR * Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs. -- Suits: NTK SENSOR * Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: Best product for methanol powered vehicles
( 2 )
$375.00
—
$550.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These "Red" single-channel hall effect sensor components are made from high-quality materials and built to ensure proper fit and function. * Thread: M12 x 1.0 * Suits: Wheel Speed, Crank/Cam etc. * Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)
( 1 )
$88.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement wideband oxygen sensors are built to fit and function just like the originals. They're designed for use with a wideband controller or gauge. The 02 sensors are available in different models: * Model 010712: Modified NTK LZA08-H5 Suits NEXUS Series devices and used with NTK compatible wideband controllers to measure Lambda Notes: Genuine NTK sensor modified by Haltech to improve sensor longevity and accuracy at extremely rich air to fuel ratios by the addition of a thin walled spring steel radial shroud at the sensor tip. * Model 010714: Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector * Model 010718: Bosch LSU 4.9 Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with factory calibration resistor connector (not a Deutsch DT-6 connector)
( 1 )
$130.00
—
$180.00
Haltech Dual Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. * Suits: Bosch LSU 4.9 Sensor * Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, 2 Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs.
Not Yet Reviewed
$550.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. Their "TI" pressure sensors for fuel/oil/wastegate are designed for remote mounting (not mounted directly into the fuel rail or engine block)—and connected via a flexible hose. They are individually electronically tested before packaging, available in different psi ratings, and include matching plug and pins, along with a -4 AN adapter. Select the Haltech "TI" pressor sensors with the psi needed.
( 1 )
$205.00
Haltech wideband hardware packs include the oxygen sensor, adapter harness, and weld-in bung to plug-and-play with a Nexus Series harness. Select the pack for LSU 4.9 or NTK.
Not Yet Reviewed
$180.00
Haltech offers replacement coolant temperature sensors for a variety of applications. They're available in different thread configurations: Model 010300 includes: Matching Delphi plug and pins Model 010302 includes: Matching Delphi plug and pins Model 010304 includes: Matching male Deutsch DTM-2 connector
( 1 )
$52.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. This replacement flex fuel sensor is built to fit and function just like the original part. It measures the ethanol-gasoline ratio of the fuel being used in your flexible fuel vehicle. * Suits: 3/8 in. "GM Spring Lock" fittings * Includes: Matching plug and 3 pins
Not Yet Reviewed
$205.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These Genuine Bosch knock sensors use a 5/16 in. mounting bolt, and include matching plug and two pins. Knock sensors detect pre-ignition and detonation, an irregular knocking vibration of the engine which could potentially be damaging. Sensors are in place to contribute to the improvement and fuel economy of engine performance.
Not Yet Reviewed
$110.00
Haltech offers a wide range of automotive parts to service or maintain your vehicle. These replacement air temperature sensors are designed to fit and perform just like the originals. They're available in a variety of fitting styles and sizes for both universal and model-specific applications.
Not Yet Reviewed
$52.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement fuel level sender signal conditioners include a matching set of Deutsch DTM 4 connectors. They're used to filter the fuel level signal voltage from the fuel sender and improve accuracy.
Not Yet Reviewed
$88.00
Haltech wideband adapter harnesses are used to integrate wideband sensors to your Nexus Series harnesses and ECUs. The adapter harnesses are terminated with a DTM6 plug to either a Bosch LSU 4.9 or NTK connector. The flying lead adapter harness is terminated with a DTM6 receptacle to AMP Superseal pins and should be used in conjunction with the Haltech LSU 4.9 or NTK adapter harness and hardware packs. Select the correct harness(es) to suit your wideband sensor and Nexus device.
Not Yet Reviewed
$31.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement MAP sensors are built to fit and function just like the original parts. The manifold absolute pressure sensor is one of the sensors used in an internal combustion engine's electronic control system. Engines that use a MAP sensor are typically fuel injected. The MAP sensor provides instantaneous manifold pressure information to the engine's electronic control unit. The Haltech sensors are available in different styles: * 3 Bar GM MAP Sensor Includes: Matching plug and 3 pins * 4 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001)
Not Yet Reviewed
$153.00
Thermocouple sensors are typically used to measure exhaust gas, manifold, turbo, or oil temperatures. Haltech open tip thermocouples have a working range of 32 to 2,012 degrees F (0 to 1,100 degrees C) and are available in a wide range of lengths from 24 in. (0.61m) to 96 in. (2.44m). All Haltech thermocouples are terminated with a K-type connector which then plug directly into a Haltech TCA box (TCA 2 or 4 thermocouple amplifier required). Choose the length you need.
Not Yet Reviewed
$98.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
