Availability
HalTech Elite 4-port CAN hubs instantly integrate into your HalTech system. These plug-and-play units allow you to expand the functionality of your ECU by permitting the connection of multiple CAN-based expansion devices. Each CAN hub includes a 300mm direct connection cable to link the CAN hub to an Elite Series ECU, and two or more hubs can be connected together.
Not Yet Reviewed
$125.00
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These 100 amp solid-state electrical relays are useful for high-frequency PWM control of auxiliary injectors, variable-speed fans, or pump control, etc. * Includes: 1K Pull up resistor. Note: Inductive loads must have diode suppression.
( 3 )
$57.00
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These wiring sleeve packs will protect your various cables and give your harnesses a professional look. Kit includes: * Nylon sleeves: 6mm x 10m, 8mm x 5m, 14mm x 2m, 25mm x 1m * Heatshrink glue-lined sleeves: 8mm x 1.2m, 12mm x 0.6m, 19mm x 0.3m, 35mm x 0.12m * Cable ties: Small (100mm) x 20, Medium (200mm) x 10 * Fleece Tape: one roll
( 1 )
$42.00
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. This replacement 6-circuit fuse box with lid is built to fit and function just like the original. A matching pin set is included. (Relays and fuses available separately.)
( 1 )
$72.00
HalTech offers a variety of wiring connectors and replacement parts for automotive performance and engine management applications, including these ECU terminals. They're available in different styles: * 8-32 Pin TYCO connector range * 26 pin, 2 row and 26/34 pin, 4 row AMP Superseal Range (E6X)
( 4 )
$16.00
HalTech Nexus Rebel LS oil pressure sensor adapter harnesses convert the oil pressure sensor connector on the Rebel LS main terminated harness from an early style/Gen III to a Gen IV connector.
Not Yet Reviewed
$24.00
HalTech Nexus Rebel LS throttle adapter harnesses are offered in several styles to join the throttle connector on the Nexus Rebel LS main terminated harness to a 6- or 8-pin LS DBW throttle, or to a cable-operated GM LS throttle body with a TPS and an IAC valve. Choose the proper cable for your setup.
Not Yet Reviewed
$28.00
HalTech Nexus Rebel LS pedal adapter harnesses are designed to connect the Accelerator Pedal Position (APP) connector on the Nexus Rebel LS main terminated harness to a Corvette or Bosch pedal for Drive By Wire (DBW) throttle control. Additionally, the adapter includes a wire for connecting the Rebel LS VCU to a brake pedal switch as part of the DBW control safety system. Choose the kit for your pedal.
Not Yet Reviewed
$49.00
HalTech Nexus Rebel LS knock sensor adapter harnesses convert the two Gen IV knock sensor connectors on the Rebel LS main terminated harness into a single plug, used in Gen III LS engines.
Not Yet Reviewed
$24.00
HalTech Nexus Rebel LS MAP sensor adapter harnesses convert the MAP sensor connector on the Rebel LS main terminated harness from an early- style/Gen III to a modern Gen IV connector.
( 1 )
$24.00
For your Haltech ECU there are several wiring and connectivity accessory choices. Their TYCO plug and pin connector sets are available with different plug arrangements along with the quantity of pins needed. Choose the plug and pin kits needed for your ECU connections.
Not Yet Reviewed
$36.00
HalTech offers a wide range of wiring components for automotive performance applications, including this Elite CAN adapter harness. HalTech Elite CAN cables are available in many lengths to connect DTM-4 to DTM-4, 8-pin Tyco, or OBDII, or a DTM4 receptacle to 16-pin Tyco. Choose the proper connectors and length needed.
Not Yet Reviewed
$47.00
HalTech offers a wide range of wiring components for automotive performance applications, including this CAN adapter harness. It's used to adapt a Platinum Series ECU to an Elite DTM-4 CAN system. * CAN Adapter cable DTM-4 female receptacle/socket to 8 pin black Tyco
Not Yet Reviewed
$47.00
For your HalTech ECU there are several wiring and connectivity accessory choices. Their Superseal plug and pin connector sets provide weather-resistant connections, and are available with different plug arrangements along with the quantity of pins needed. Choose the plug and pin kit needed for your ECU.
Not Yet Reviewed
$52.00
—
$85.00
HalTech's Elite Premium universal wire-in harness is ideal for dedicated race cars, engine swaps, and custom wiring jobs. Each harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your HalTech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * Color-coded and labelled wires match the detailed wiring diagram for a confusion-free construction process * The wiring diagram is accompanied by the full ECU manual and software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Includes: Firewall grommet, molded 6 power circuit HalTech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits
Not Yet Reviewed
$450.00
—
$940.00
HalTech's Elite 2000/2500 GM Gen III LS1/LS6 Non-DBW terminated harness is the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug-and-play product allows you to be up and running in just a few hours. When installed in conjunction with a HalTech Elite ECU, this harness opens the door to virtually limitless performance modification and tuning of your vehicle. * The quick start guide will walk you through installation * The guide is accompanied by the full ECU manual and software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Fully programmable systems allow you to extract all the performance from your engine—by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions. * Suits: Factory EV1 injector connectors and common U.S.-style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. WBC1/2 CAN O2 wideband controller ready (controller and sensors not included) * Includes: Engine harness with fuse block and firewall grommet * Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adapter if required. (HT-040090 or HT-040090) Ignition coils and harnesses are NOT included, Please order 8 x HT-020102 and/or HT-045657 if required.
Not Yet Reviewed
$670.00
HalTech's Elite 2000/2500 GM Gen IV LS/LSX Non-DBW terminated harness is the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug-and-play product allows you to be up and running in just a few hours. When installed in conjunction with a HalTech Elite ECU, this harness opens the door to virtually limitless performance modification and tuning of your vehicle. * Injector Connector harness options: Bosch EV1 or Bosch EV6 * Quick start guide will walk you through installation of the harness * Guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Programmable systems allow you to extract all the performance from your engine—by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions * Suits: Common U.S.-style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only. * Includes: Engine harness with fuse block and firewall grommet * Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adapter if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.
Not Yet Reviewed
$670.00
HalTech's Elite 2000/2500 GM Gen IV LS/LSX DBW Ready terminated harness is the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labeled wires and this plug-and-play product allows you to be up and running in just a few hours. When installed in conjunction with a HalTech Elite ECU, this harness opens the door to virtually limitless performance modification and tuning of your vehicle. * Injector Connector harness options: Bosch EV1 or Bosch EV6 * Quick start guide will walk you through installation * Guide is accompanied by the full ECU manual and software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Programmable systems allow you to extract all the performance from your engine—by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions * Suits: Common U.S.-style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only. * Includes: Engine harness with fuse block and firewall grommet. * Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adapter if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.
Not Yet Reviewed
$670.00
HalTech has been at the cutting edge of engine management technology since it first opened its doors in 1986. Today, Haltech ECUs are sold in over 50 countries around the world. They are the driving force behind many record-setting race vehicles. HalTech also has the wiring and connectivity accessories you will need. They offer a large grouping of engine and sensor plug and pin connector sets for ignition coils and crank/cam to MAP, temperature, and Flex fuel composition sensors. Adapt your factory harness utilizing HalTech's plug and pin connector sets.
Not Yet Reviewed
$26.00
HalTech Nexus Rebel LS T56 transmission adapter harnesses connect the transmission breakout connector on the Rebel LS main terminated harness to a T56 transmission vehicle speed sensor.
Not Yet Reviewed
$24.00
HalTech SurLok connectors are available in red or black options for connection of battery cables to your HalTech Nexus R3 and R5 ECUs and PD16 power distribution modules. The SurLok 120 amp connectors crimp to 4 AWG battery cable for R3 and PD16 units, while the SurLok 200 amp connectors suit the Nexus R5 for connection to 1 AWG battery cables. Select the individual red or black HalTech SurLok or the pair designed to work with your ECU or module.
Not Yet Reviewed
$36.00
HalTech's Elite 2000/2500 GM Gen III LS1/LS6 DBW Retrofit Ready terminated harness is the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug-and-play product allows you to be up and running in just a few hours. When installed in conjunction with a HalTech Elite ECU, this harness opens the door to virtually limitless performance modification and tuning of your vehicle. * The quick start guide will walk you through installation * The guide is accompanied by the full ECU manual and software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Programmable systems allow you to extract all the performance from your engine—by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions. * Suits: Retrofit of a GEN IV LS2/3 DBW throttle body. Common U.S.-style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. WBC1/2 CAN O2 Wideband Controller ready (Controller and sensor(s) not included) Manual transmission only. * Includes: Engine harness with fuse block and firewall grommet * Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adapter if required. (HT-040090 or HT-040091) Ignition coils and harnesses are NOT included, Please order 8 x HT-020102 and/or HT-045657 if required.
Not Yet Reviewed
$670.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
