Availability
Go Fast Bits offers DV Plus Range with Direct-Fit Performance Diverters for a wide range of domestic and import vehicles. GFB's DV+ solution couldn't be simpler: keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great—the ECU opens it faster than any pneumatic valve, so why replace it? The weak point, however, is the valve mechanism itself. GFB's DV+ solves this problem by replacing the valve parts with an anodized billet aluminum housing, fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, or include a solenoid valve with the diverter. These approaches add unnecessary cost and additional parts (in some cases requiring long vacuum hose runs, mounting brackets, etc.). All these additional items result in a product that is slower, less responsive, more expensive, and takes longer to install. GFB's DV+ solution, on the other hand, is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Oh, and it doesn't require different springs or frequent re-builds, either. Order the model recommended for your vehicle.
( 1 )
$147.60
—
$166.50
Go Fast Bits offers DV Plus Diverter Valves with TMS (Turbo Management System) Advantage for a wide range of vehicles, particularly imports. GFB's DV+ solution couldn't be simpler—keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?)—but the weak point is the valve mechanism itself. So GFB's DV+ solves this problem by replacing just the valve parts with an anodized billet aluminum housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum—plus either a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB's DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Order the model recommended for your vehicle. Additional notes: * Retains the factory solenoid coil for seamless integration * Replaces plastic valve parts with metal for reliability and strength on chipped engines * Exclusive "pilot-actuated" valve mechanism for rapid response at high boost
( 6 )
$147.60
—
$242.10
Go Fast Bits' DVX takes the extremely popular DV+ diverter valve and adds dual venting outlets, along with GFB's patented venting bias adjustment system. So, not only do you get improved boost holding and throttle response, you have total control over your blow-off sound volume! The DVX is not just a noise maker (like BOV spacers); by modifying the valve operation method, it offers the same performance benefits that the DV+ does. It retains ECU control for the fastest possible operation. No other blow-off valve has the advantage of GFB's venting bias adjustment, allowing you to alter the blow-off sound simply by moving the adjustment lever. GFB's DV+ design solves the longevity and boost leaking issues that are common with factory diverter valves, and also changes the operation method to "pilot actuation" to ensure better performance on stock or modified engines. Furthermore, these benefits won't cost you a fortune! Rather than throwing the entire factory diverter valve system in the trash (like other manufacturer's "solutions"), the DV+ keeps what works and replaces what doesn't. Order the model recommended for your vehicle.
( 1 )
$247.50
—
$278.10
The Hybrid valve is back! Go Fast Bits Hybrid dual outlet valves are three valves in one; full recirculation, full atmosphere, or 50/50 venting. In 1999, GFB's first Hybrid valve pioneered the dual port design, which was so successful, and the technology has since been adopted by most other brands. By "staging" the two venting outlets at low valve lifts most of the air is recirculated. As the car is driven harder, the valve opens further and more of the atmosphere venting port is exposed for a louder sound--a benefit that makes it possible to use these valves on cars with sensitive airflow meters that often suffer issues such as backfiring and/or stalling, whilst still achieving the signature blow-off sound. Go Fast Bits Hybrid dual outlet valves are direct-fit, bolt-ons with a range that covers a huge list of popular vehicles. Purchase the Hybrid model for your vehicle.
( 2 )
$225.00
If you're looking for an EFI fuel pressure regulator that seals and behaves just like your factory unit but with the added reliability and high flowing capacity you require, check out Go Fast Bits FX-R Series fuel pressure regulators. The multiple inlet/gauge ports allow for a wide range of fuel system setups beyond the usual inlet/outlet, including parallel fuel rail or returnless "deadhead" systems. The two gauge ports allow you to run a mechanical fuel pressure gauge and an ECU fuel pressure sensor if you want to. GFB's engineers incorporated a softer, more compliant yet resilient material for the valve seat that positively seal and hold the fuel pressure on shut down for factory-like sealing and reliable startup, as well as superior fuel resistance suitable for Unleaded, Ethanol, Methanol, and Diesel fuels. Whether you run pump petrol/gasoline, Ethanol, Methanol or Diesel, a single small pump, or a massive triple setup, the Go Fast Bits FX Series EFI fuel pressure regulators range has got you covered, no matter what your fuel pressure regulatory requirements are! Additional features and benefits: * Billet aluminum construction with black anodized finish * Double-layer/double reinforced diaphragms have twice the reinforcing material of the single layer type used in most regulators * Valve seat has a soft, more compliant yet resilient material that positively seals and holds fuel pressure for easier startup vs. conventional aftermarket fuel pressure regulators that utilize metal-to-metal valve and seat * PTFE co-polymer seat with spherical stainless valve retains fuel pressure longer after shutdown * Spring pre-load adjustment screw is O-ring sealed and does not leak vacuum/boost * Completely serviceable
Not Yet Reviewed
$269.10
Go Fast Bits VTAs are a performance blow-off valve solution for a wide range of foreign and domestic cars and trucks with an electronic factory diverter valve. If you want sound with your performance (or performance with your sound!), these VTAs offer just that! By combining the proven performance benefits of GFB's ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions. The VTA shares the successful DV+ design philosophy: "Keep what works, replace what doesn't." This means Go Fast Bits retained ECU control and the solenoid from the factory diverter to ensure the fastest possible response time—without the added and unnecessary cost of replacing the solenoid like some brands do. The weak part of the factory diverter has always been the plastic valve mechanism; this is the part GFB has replaced. The VTA features CNC-machined billet components that last a lifetime, and the valve operation method has been updated for better performance. The factory diverter valve can only operate in two states: open or closed. When it opens fully at low boost or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition. GFB pioneered the use of "pilot operation" in the DV+, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve. It's this design philosophy that makes the VTA not only the best performing blow-off valve solution, but also the best value on the market. Order the VTA Performance blow-off valve model recommended for your vehicle. Key features: * TMS Technology for faster boost recovery on gear shift and during throttle modulation * Improved boost holding ability * Atmosphere venting for blow-off sound * Retains ECU control * Simple, direct bolt-on kits include everything you need to install
( 5 )
$198.00
—
$269.10
The FX-S Series fuel pressure regulators from Go Fast Bits join their existing line of successful fuel delivery products—built with the same precision, machining quality, and reliability that is the foundation of GFB's reputation. Go Fast Bits FX-S fuel pressure regulators are available in different model configurations to meet the needs of your specific setup. The 8050 models have multiple inlet/gauge ports that allow for a wide range of fuel system setups beyond the usual inlet/outlet, including parallel fuel rail or returnless "deadhead" systems. The two gauge ports allow you to run a mechanical fuel pressure gauge and an ECU fuel pressure sensor if you want. GFB also offers the 8051 model—a direct drop-in Bosch replacement for common Bosch regulators that clip into the fuel rail, rather than replacing the entire fuel rail or using an adaptor with a separate fuel pressure regulator. By simply clipping in the FX-S 8051 fuel pressure regulator will allow you to run a much larger pump setup even with the factory rail. Whether you run pump petrol/gasoline, Ethanol, Methanol or Diesel—Go Fast Bits has you covered—no matter what your fuel pressure regulatory requirements are! Features of FX-S Series fuel pressure regulators: * Billet aluminum construction with black anodized finish * Features double-layer diaphragm that has twice the reinforcing material of the single layer type used in most regulators * Valve seat has a soft, more compliant yet resilient material that positively seals and holds fuel pressure for easier startup vs. conventional aftermarket fuel pressure regulators that utilize metal-to-metal valve and seat * PTFE co-polymer seat with spherical stainless valve retains fuel pressure longer after shutdown * Spring pre-load adjustment screw is O-ring sealed and does not leak vacuum/boost * Completely serviceable
( 2 )
$220.50
Go Fast Bits offers Mach 2 TMS Recirculating Diverter Valves for a variety of vehicles. It's the simple and essential modification for 30 percent quicker boost—utilizing proven TMS (Turbo Management System) technology to ensure dependable boost holding and optimum throttle response. If you don't need the patented venting bias adjustment feature of the Respons or Deceptor Pro, the Mach 2 is your answer. It's configured as a 100 percent recirculating valve (i.e. bypass, plumb back), and add-on kits are also available to convert to 100 percent atmosphere venting. Use the recirc model for direct factory replacement when you want the performance without the noise—or add the conversion kit when you want some noise with your performance! Factory bypass valves have two main shortcomings: they're typically designed to start opening above a certain pressure to protect the engine, and they're not optimized for throttle response. And you can't vent them to atmosphere without stalling your engine. The Mach 2 solves all of these issues. It can effectively hold unlimited boost (unlimited in that no turbo could ever produce enough pressure to damage it), and the TMS technology ensures maximum throttle response. And you CAN vent with the atmo conversion to atmosphere without stalling your engine. Product notes: * Recirculation model for direct factory replacement for performance without the noise * Atmosphere venting kits to convert the recirculating valve if you want noise with your performance * Like the Respons and Deceptor Pro II, the Mach 2 is available in a range of bolt-on kits for most popular turbo models * No additional adaptors, parts or vehicle modifications are required—simply remove the factory bypass valve and replace it with the Mach 2; it's that simple!
( 2 )
$172.80
—
$190.80
Go Fast Bits SXV blow-off valves are designed to ensure the ultimate reliability, performance, and boost holding. Featuring a 25mm inlet and outlet, the SXV is the perfect valve to replace the plastic OEM bypass/diverter valve or integrate into a turbo system that didn't previously have a valve. Plastic hose-mounted OEM bypass valves are very common, as are the reliability issues they suffer from cracked plastic and diaphragm failures that result in significant boost loss and poor performance. A significantly leaking OEM valve can also accelerate wear or even damage the turbo from over speeding. These SXV blow-off valves utilizes an uncompromising approach to their design and materials to ensure all your hard-earned boost gets to the engine, so the turbo doesn't work harder than it needs to. Deliver your turbos' full potential with the use of these SXV blow-off valves featured from Go Fast Bits! Product Overview: * Precision CNC-machined components for rugged reliability * Viton piston seal for the ultimate boost holding * The operation of the SXV is designed to offer the best possible throttle * An OEM bypass/diverter valve is open until it needs to close—increases turbo lag * An SXV is closed until it needs to open—minimizes turbo lag * By venting only, when necessary, the SXV eliminates the additional lag imposed by the OEM valve, resulting in the best throttle response your turbo system is capable of delivering. * Switch out your OEM valve for an SXV for the ultimate reliability and throttle response, with the peace of mind of Go Fast Bits lifetime warranty!
Not Yet Reviewed
$171.00
Want to increase or decrease the boost on your variable vane (i.e. VNT/VGT) turbo diesel? Is the factory boost curve erratic and all over the place? Blown an engine with the factory boost control system? Then the Go Fast Bits V2 VNT boost controller is for you! It's common knowledge that some engines with vacuum operated ECU controlled VNT/VGT turbos suffer erratic boost behavior—to the point where turbo or engine failures can occur, even on completely stock vehicles. The V2 takes over from the factory ECU control and ensures a stable and repeatable boost curve, which your engine will thank you for! Cleverly packaged within a black anodized CNC-machined 6061 aluminium housing are two individual adjustment dials, each having a separate and unique adjustment function. The first dial sets the boost pressure, while the other is used to adjust the boost rise rate, i.e. how fast the turbo spools—meaning you can tune your boost to suit any driving conditions. Manual Boost Controllers may lack the extra features of an EBC (Electronic Boost Controller), but they get the job done! When you need simple, reliable, set-and-forget boost control, a Manual Boost Controller is hard to beat. Installation is as simple as connecting a couple of hoses, and setup is as easy as turning the adjustment until you hit your target. Once that's done, you can forget about it and drive your car. Being a rugged, mechanical device, it will never vary or fail, no matter how much abuse you can throw at it. GFB Manual Boost Controllers are available in two types: one is suited for conventional pneumatic wastegates, and the other is for use with vacuum-actuated VNT (Variable Nozzle Turbine)/VGT (Variable Geometry Turbine) turbos that are commonly used on diesel engines.
Not Yet Reviewed
$179.10
Go Fast Bits offers a dedicated diesel boost controller for non-VNT (variable vane) turbos. These D-Force Boost Controller EGT (exhaust gas temperature) kits are a direct plug-in to GFB's existing 3006 D-Force Electronic Boost Controller. They add critical exhaust temperature display to your existing D-Force display unit for a seamless integrated solution. Each kit is comprised of an exhaust thermocouple probe, sensor module and weld-on adapter—which is all you require to get you running.
Not Yet Reviewed
$140.40
If you're wanting to hold your wastegate shut longer or wanting to extend the operating pressure range of your current wastegate spring setup, then Go Fast Bits G-Force boost control solenoids will help you get there. A 4-port solenoid is a much better option for those who are running anti-lag in their vehicles. For the most part though, a 3-port solenoid is more than sufficient. Select the boost controller solenoid model suited to your application needs.
Not Yet Reviewed
$108.68
—
$152.10
If you've accidently damaged your existing G-Force boost controller head unit, then worry no more—Go Fast Bits offers a genuine replacement head unit for your compatible boost controller model, so you don't need to buy a full replacement boost controller kit! This is a replacement boost controller head unit only and does not include any other fitting hardware or sensors.
Not Yet Reviewed
$254.70
If you've accidently damaged your existing D-Force boost controller head unit, then worry no more—Go Fast Bits offers a genuine replacement head unit for your compatible boost controller model, so you don't need to buy a full replacement boost controller kit! This is a replacement boost controller head unit only and does not include any other fitting hardware or sensors.
Not Yet Reviewed
$254.70
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
