Gearstar Performance Transmission - In Stock Filter Options - Free Shipping on Orders Over $125 at Summit Racing

GearStar Ford 4R70W Level 3 Transmissions

GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 3 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 450 lb.-ft. of torque * 10 in. custom built billet converter with lock-up * Stall: 2,600 to 3,200 * Master overhaul kit with Alto hardened steels * Raybestos Stage I frictions * TransGo reprogramming shift kit with shift command * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * Complete Torrington bearing kit * New bushing kit * New reverse band * Alto Red Eagle wide O.D. band * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Rev. drum with heavy-duty mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly * Expanded capacity overdrive servo * Updated O.D. servo pin * Updated 3rd accumulator piston * Transmission mount * Custom 360-degree adjustable shift linkage arm

Not Yet Reviewed

$7,095.00

GearStar GM 4L80E Level 4 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 800 hp * Up to 700 lb.-ft. of torque * Stall: 2,800 to 3,400 * Custom-built, custom-stalled 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input shaft * 300M main shaft * 300M forward clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * New OEM steel pan

1.0 out of 5 stars ( 1 )

$7,845.00

GearStar GM 4L80E Level 3 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 3,600 * Custom-built 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input and main shafts * Heat-treated forward steel clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blue printed pump and valve body * Transmission mount * New OEM steel pan

Not Yet Reviewed

$6,845.00

GearStar GM 4L60E Level 3 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L60E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Raybestos Stage 1 frictions and steels * TransGo heavy-duty reprogramming kit with Shift Command * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 10-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * High-energy wide bands * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Inspection cover (chrome) * Transmission mount * New OE steel transmission pan

Not Yet Reviewed

$4,945.00

GearStar GM 4L65E Level 3 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Stall: 2,600 to 3,200 * High performance 12 in. furnace-brazed converter -- Flanged hub and carbon fiber clutch * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * Carbon fiber wide 2-4 band * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Transmission mount * New OE steel transmission pan

Not Yet Reviewed

$4,945.00

GearStar Quick4 Transmission Controllers

GearStar offers Quick4 Gen 2 standalone automatic transmission controllers for a variety of applications. They are required for any electronically controlled transmission. Each package contains the computer, wiring harness, and custom wire loom; comes preloaded with a tune designed for specific transmissions; and will include a throttle position sensor kit. --- Models are currently available to support these popular transmissions: * GM 4L60E, 4L65E, 4L70E (2008 and earlier) 13 pin main harness connector * GM 4L80E and 4L85E * Ford AOD-E, 4R70W 1998-2003 wiring harness with the 12 pin MLPS switch * Ford E4OD and 4R100 late solenoid connector, with 11 or 12 pin MLPS switch The Quick4 is a powerful, fully featured, easy-to-use transmission control system. It enables the use of modern, electronic 4-speed transmissions on a wide variety of vehicles that lack OEM capabilities, such as classic cars, trucks, or motor homes. It can also be used to enhance a modern vehicle's performance by taking over control from the OEM computer, allowing the user to directly adjust the shift points, firmness, torque converter engagement, and much more. The Quick4 does not require the use of a laptop for tuning. Tuning can be done through the user interface with a soft touch dial and LCD screen. There is free downloadable tuning software to fine-tune your transmission with a Windows-based PC.

Not Yet Reviewed

$879.99

GearStar Billet Direct Drums

Unleash the full potential of your transmission with premium billet direct drums by GearStar—they are engineered for high-performance builds using the 4L80E, 4L85E, and TH400 platforms. Designed to handle extreme torque and horsepower, they are the ultimate upgrade for racers, off-roaders, and heavy-duty enthusiasts who demand reliability without compromise. Whether you're chasing quarter-mile times or towing heavy loads, these billet direct drums are your transmission's best ally. They are the perfect blend of OEM compatibility and race-grade engineering. Key features: * 36-Element Oversized Sprag—built for brutal launches and high-stress conditions, the oversized sprag delivers unmatched holding power and durability. Say goodbye to sprag failures under load *Billet aluminum construction—drum is precision-machined from high-strength billet for superior rigidity and heat resistance (this drum won't flex or fatigue under pressure) * Factory-Size 4L80E/4L85E Friction Compatibility—retains OEM friction dimensions for optimal clutch surface area and thermal management, no need to downgrade to smaller Powerglide frictions—this drum keeps your build robust and reliable * High-capacity clutch design—drum is designed to hold additional clutches to provide maximum durability in extreme conditions * TH400 compatibility—seamlessly integrates with TH400 setups, making it a versatile choice for hybrid builds and custom applications * Drop-In ready drum is designed for easy installation with no need for custom machining or exotic components * Built to work with your existing clutch pack and transmission architecture

Not Yet Reviewed

$795.00

GearStar Automatic Transmission Main Shafts

Transmission main shafts are critical components that transfer power from the engine to the output gears, enabling the transmission to change gears and transmit torque to the wheels. GearStar automatic transmission main shafts are manufactured from high-strength, heat-treated 300M steel alloy for exceptional performance and durability. Select the main shaft designed for your transmission.

Not Yet Reviewed

$340.00

GearStar Automatic Transmission Input Shafts

Transmission input shafts are the primary links between the engine and the transmission, receiving power from the engine's torque converter and conveying it to the transmission's internal gears and components. GearStar automatic transmission input shafts are manufactured from high-strength, heat-treated 300M steel to withstand the torque and stresses of the engine. Select the input shaft designed for your transmission.

Not Yet Reviewed

$340.00

GearStar Pro Shift Servo and Piston Kits

GearStar Pro Shift servo and piston kits provide positive shifts, while increasing the clutch and band life and eliminating warpage. Highlighted by their billet aluminum construction, the GearStar Performance Transmission logo is laser-etched, and seals, O-ring, and gasket are included. Eliminate slippage between gears and/or gear flares with GearStar Pro Shift kits.

Not Yet Reviewed

$205.00

GearStar Automatic Transmission Valve Bodies

The transmission valve body, or simply valve body, is a crucial component for the proper function of your automatic transmission. Consisting of valves, solenoids, and hydraulic passages, the valve body controls the flow of fluid, directing it where it needs to go for smooth, positive gear changes. GearStar automatic transmission valve bodies efficiently direct fluid to the necessary components, keeping your gear changes precise. They are highlighted by strong billet aluminum construction and available with or without trans-brake. Select the one needed for your transmission.

Not Yet Reviewed

$950.00

—

$1,250.00

GearStar Quick6 Transmission Controllers

GearStar Quick6 transmission controllers are powerful, fully featured, easy-to-use, standalone transmission control systems. They enable the use of electronic 6-speed transmissions on a wide variety of vehicles that lack OEM capabilities, such as classic cars and trucks. They can also be used to enhance a modern vehicle's performance by taking over control from the OEM computer, allowing the user to directly adjust the shift points, firmness, torque converter engagement, and much more. The Quick6 transmission controllers do not require the use of a laptop for tuning. Tuning can be done through the user interface with a soft touch dial and LCD screen. There is free downloadable tuning software to fine-tune your transmission with a Windows-based PC. The controller package will include the computer, wiring harness, custom wire loom, preloaded tune designed for GearStar transmissions, and will include a throttle position sensor kit. Select a Quick6 designed for your transmission.

Not Yet Reviewed

$1,251.99

GearStar Flexplate Bolts

GearStar offers flexplate bolts for a variety of applications, including many Chevy and Ford engines from 1955 and up. These 6-piece sets of hex-head fasteners are designed to secure a flexplate to the crankshaft of an automatic transmission. They're machined from steel with heat-treated and rolled threads, a protective black oxide finish—and are a performance enhancement for apps requiring a higher clamping load, such as those with upgraded flexplates. The bolts are available in multiple lengths.

Not Yet Reviewed

$23.99

Gearstar Performance Transmission Parts and Accessories