Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
FuelTech Turbocharger Speed Sensors
FuelTech turbocharger speed sensors are designed to obtain vital data in order to determine whether the turbo is operating within its compressor map and at its highest efficiency. By inputting blade count you can measure rotational speed and maximize your turbo output, thus, allowing you to gain valuable data on turbo selection. Available with or without mating plug kit. Note: This sensor will not read until the turbo speed is above 5,000 rpm, if spinning the wheel by hand, the sensor will read 0 rpm.
Not Yet Reviewed
$529.00
FuelTech WB-O2 Sensors
Designed for use with their WB-O2 Nano, Alcohol O2, WB-O2 Datalogger, and WB-O2 Slim products, FuelTech WB-O2 sensors measure the amount of oxygen in your vehicle's exhaust gases. Your engine's computer uses this data to help figure out the current air/fuel ratio. FuelTech also offers an alcohol model designed for high horsepower alcohol combinations, providing high accuracy and low AFR readings. Maintain fuel efficiency and emissions standards with the FuelTech WB-O2 sensor best suited for your application.
Not Yet Reviewed
$699.00
FuelTech FT Input Expanders
FuelTech's FT input expanders are input expander modules compatible with the FuelTech PowerFT line (FT500/FT500LITE/FT450/FT550 and the FT550LITE/FT600). These FT input expanders offer 20 inputs for sensor readings—such as pressure, flow, temperatures, position, and activation of functions using keys or buttons, and four differential inputs rpm reading and speed. The expander modules fully integrate with FTManager software and communication via the CAN network, with a simple and fast configuration through an interface already known to users familiar with FuelTech products.
Not Yet Reviewed
$659.00
FuelTech FT450/550 4-Cylinder Universal A Harnesses
FuelTech offers a variety of complete and ready-to-install harnesses for fast, headache-free installation. FuelTech FT450/550 4-cylinder universal A harnesses can be used with both the FT450 and FT550 ECUs in a complete plug-and-play style. They fit systems with up to four injectors and four individual smart coils, wired in semi-sequential fuel injection and wasted spark ignition. They can be used with high or low impedance injectors; low impedance requiring the use of a peak and hold driver; high impedance requiring a peak and hold jumper harness (both sold separately). The harnesses are set up for either VR or Hall effect cam and crank sensors and include three relays with built-in fuses for main electronics, injectors, and coils. FuelTech universal 4-cylinder A harness has a label for each connector and the insulation is heat, moisture, and oil-resistant.
Not Yet Reviewed
$599.00
FuelTech FT450/FT550 6-Cylinder Universal A Harnesses
FuelTech offers a variety of complete and ready-to-install harnesses for fast, headache-free installation. FuelTech FT450/FT550 6-cylinder universal A harnesses have all the components needed to make a plug-and-play installation on an engine with a standard setup. The connectors, relays, and fuses are directly built-in and can be used with nearly any application with six injectors and six coils. They can be used with high or low impedance injectors, and the harnesses are set up for either VR or Hall effect cam and crank sensors. FuelTech 6-cylinder A harnesses include three relays with built-in fuses for main electronics, injectors, and coils, and the insulation and connectors are moisture, heat, and oil-resistant.
Not Yet Reviewed
$699.00
FuelTech EGT-4 CAN Conditioners
FuelTech EGT-4 CAN conditioners are compatible with any Type K thermocouple (grounded junction or not). They feature a 4-channel signal conditioner with CAN bus communication for PowerFT ECUs that can be used to read EGTs, CHTs, oil, air, water or any other temperature using a Type K thermocouple. These units work as an input expander for PowerFT ECUs, freeing up four white input channels to be used for other purposes. With the possibility to use up to four EGT-4 modules in the same installation, as many as 16 different channels will be available for all sorts of data acquisition. PACKAGES AVAILABLE: * V8 / 2 units, harnesses and 8 sensors: -- with 2 harnesses -- 2 of each 42 in./36 in./30 in./24 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 6 cylinder / 2 units, harnesses and 6 sensors: -- with 2 harnesses -- 48 in./42 in./36 in./30 in./24 in./18 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 4 cylinder / harness and 4 sensors: -- with harness -- 42 in./36 in./30 in./24 in. Thermocouple sensors included * 4 rotor / harness and 4 sensors: -- with harness -- 4 of the 36 in. Thermocouple sensors included * 3 rotor / harness and 3 sensors: -- with harness -- 3 of the 36 in. Thermocouple sensors included * 2 rotor / harness and 2 sensors: -- with harness -- 2 of the 36 in. Thermocouple sensors included
Not Yet Reviewed
$674.00
