Availability
FuelTech boost controller dual valve kits use the active control function of the wastegate valve pressure for a more precise control of turbo pressure in street, circuit, and drag race cars. The control can be performed by time after 2-step, by gear and engine RPM, by gear elapsed time, by a single target, or by engine RPM—besides specific targets for 2-step, 3-step. and burnout mode. Modify the pressure signal for the performance you want with a FuelTech boost controller dual valve kit.
Not Yet Reviewed
$249.00
FuelTech FT injectors were developed to accurately deliver fuel from low to full-load on your engine. They're compatible with any ECU available on the market. The injectors are available in a variety of advertised flow rates, individually or in sets of eight. Additional product notes: * REAL flow—all injectors are tested and calibrated to ensure linearity, repeatability, and accuracy * Internal components are resistant to corrosion, guaranteed by the salinization test carried out on all raw materials used * Reduce the number of injectors, connections, and hoses in your engine package * Compatible with any type of fuel (gasoline, ethanol, nitromethane, nitropropane, MTBE, and ETBE) * Tested and approved on 4,000+ hp engines * Best cost benefit flow x price
Not Yet Reviewed
$219.00
—
$249.00
The FuelTech WB-O2 Nano is a compact, efficient wideband oxygen sensor tool for use in monitoring and adjusting combustion. They're designed to condition and read the Bosch LSU 4.2 wideband oxygen sensor with speed and precision for a broad range of mixtures--in addition to storing the engine's most important information, allowing a detailed analysis of its operation status. The WB-O2 Nano features a channel for capturing the engine's RPM signal, as well as four other analog channels that can be configured, for a total of six channels of storage capacity in its internal memory. Another important feature of the FuelTech WB-O2 Nano is the unit's high-speed USB connection, which allows easy connectivity to a notebook or computer, thus eliminating the demand of serial adaptors and facilitating equipment operation, as external feed is not necessary. Additional details: * O2 sensor reading is sent via CAN to the ECU and recorded in the internal datalogger, without using any analog input * Can be mounted in driver's compartment for quick reference--and adding O2 sensor to the ECU doesn't occupy valuable analog input channels * IP67 waterproof rated * Extended reading scale 0.35 to 9.99 Lambda, 5.15 to 147 Gas A/FR, 2.24 to 64 alcohol A/FR * CAN communication with PowerFT line
( 1 )
$199.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FT450/550 A unterminated harnesses are offered in 10 ft. and 20 ft. lengths for FT450/550 A connectors. Wire your project from scratch with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$119.00
—
$169.00
FuelTech Peak and Hold 8A/2A injector drivers are 4-channel low impedance units designed to keep up with the demands of today's high horsepower engine fuel injectors. The peak and hold circuit opens the injector with a high current (Peak) pulse--and then switches the current down to hold the injector open to feed the volume. Additional details: * Controls up to 4 injectors with impedance below 1.5 ohm * 16 Bosch 160 lbs./h (1600cc) injectors (4 per channel) * 8 Siemens low-impedance injectors (2 per channel) * 4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per injector) Package includes: * 1 Peak and Hold 8A/2A * 1 operation and installation guide * 1 mounting kit (four rubber mounts, four washers and four 1/4 in. nuts) * 6 ft. Peak and Hold unterminated harness (optional) * 1 FuelTech black carbon fiber sticker
Not Yet Reviewed
$219.00
FuelTech driveshaft sensors from Davis Technologies are extremely high-quality hall effect-type, capable of measuring speeds up to 15 KHz. These sensors are triggered by ferrous metal, not magnets, allowing you to trigger from FuelTech's custom rings, gear teeth, or even bolt heads.
Not Yet Reviewed
$175.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FT550 B unterminated harnesses are for upgrading from FT450. The B harnesses are offered in 10 ft. and 20 ft. lengths. Wire your project from scratch with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$119.00
—
$149.00
FuelTech Pan Vacuum sensors are designed to monitor crankcase vacuum inside an engine to ensure piston rings are sealing properly in the cylinders. A correctly sealed engine is vital in achieving maximum performance. One of the best ways to ensure you're keeping that ring seal at its optimum best is with the use of a FuelTech Pan Vacuum sensor. They're made from durable materials with a 1/8 in. NPT thread size to provide accuracy.
Not Yet Reviewed
$169.00
FuelTech backpressure dampening canisters will make a great addition to your turbocharged engine. Measuring the exhaust backpressure is vital data required to best determine the true efficiency of your combination. By separating the backpressure sensor from the direct connection to the exhaust manifold using FuelTech's backpressure canister, the sensor will be protected from heat, moisture--and has pressure spike filtering naturally built into the canister. This filtering assists in protecting the sensor and allows you to see true indication of pressure in the exhaust manifold. These billet aluminum backpressure canisters measure 2 3/4 in. to 2 1/2 in. with mounting holes 2 in. center-to-center. The sensor port and hardline inlet are tapped to 1/8 in. NPT. Add one of these backpressure canisters to your project today!
Not Yet Reviewed
$199.00
FuelTech provides the plug kits needed to finish up your wiring project. Whether you want to measure your vehicle's throttle position, intake air temperature, water temperature, or plug into some other type of sensor, these sets deliver top-notch quality in a variety of configurations for easy installation. Developing and designing high-performance products since 2003, FuelTech offers plug kits engineered to fulfill the needs of your application.
Not Yet Reviewed
$159.00
FuelTech offers a variety of top-quality steering wheels with different sporty looks and features. Here are some wheel specifics: FTR-330 LIGHTWEIGHT STEERING WHEEL: * 32mm diameter grip * 13 in. (365mm) overall diameter * Deep-dish design with 1 3/8 in. (35mm) distance from the mounting surface to the centerline of the steering wheel grip * Central mounting surface is designed to reduce even more weight and can be used on hubs with a 3- or 6-bolt pattern (hub is not included) * Universal mounting (with oblong holes) makes it compatible with any 3- or 6-bolt pattern hub and quick-release mechanism * Weighs just 1.2 lbs. FTR-A 365 STEERING WHEEL: * 32mm diameter grip * 13 in. (365mm) overall diameter * Deep dish (depth from center surface to grip): 55mm * Central fixing point designed to be lightweight and support 3- or 6-bolt pattern hubs (hub not included) * Universal bolt pattern, compatible with any 3- or 6-bolt steering wheel hub * Weight: 620 grams FTS-1 STEERING WHEEL: * Hand-stitched ultrasuede grip * Ultrasuede center red stripe * Marine-grade aluminum structure * Ergonomic grip * Universal bolt pattern, compatible with any 3 or 6 bolt steering wheel hubs * Deep dish (depth from center surface to grip): 55mm * 345mm overall diameter * Weight: 930 grams * Paddles or hub NOT included
( 4 )
$179.00
FuelTech CDI racing ignition coil brackets will mount four FuelTech CDI racing ignition coils. Made from lightweight billet aluminum (only 13.1 oz.), the bracket kits include four 1/4 in. socket head cap screws to mount the coils to the bracket and four 1/4 in. threads in the back, front, and bottom for mounting to the chassis.
Not Yet Reviewed
$119.00
The FuelTech FT dual power drivers have two half bridge outputs that allows the activation of up to 25A current. With two half bridge outputs the DPD can drive a single motor in two directions, or two motors in a single direction. These units are able to drive high-speed PWM (using PWM ECU output). The robust hardware brings very low delay on activation, allowing the use of controls that use high-speed PWM signal. Tech specs: * Power: 9 V to 30 V * Max outputs current (total): 25A * Peak current: 100A to 10ms * Operating voltage: 9 V to 30 V * Max operating frequency: 25KHz @ 30 V * Input trigger level Low: <1.3 V * Input trigger level High: >1.6 V * Switching delay: high-to-low: 5.6 microseconds; low-to-high: 6 microseconds
Not Yet Reviewed
$219.00
FuelTech offers a variety of data acquisition components, including driveshaft sensors compatible with many advanced engine control and monitoring systems (ECU). They're available in different thread diameters. The primary purpose of FuelTech driveshaft sensors is to provide real-time, accurate driveshaft (rpm) data for advanced traction control systems to improve vehicle performance by allowing for faster, more precise adjustments to power reduction and tire slip detection. Benefits include enhanced performance through optimized fuel and ignition maps, improved data accuracy for logging and tuning, and reliable integration with FuelTech ECUs to push vehicles to their limits with greater precision and confidence.
Not Yet Reviewed
$179.00
FuelTech has released a variety of engine harnesses for popular engine combinations, boost control, and data-logging, including these 10 ft. input expander harnesses. From plug-and-play to unterminated—FuelTech has the correct harness to help complete your FuelTech ECU-equipped project.
Not Yet Reviewed
$199.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech Peak & Hold harnesses are ready to wire your injector drivers and they are compatible with all current versions. Easily install your Peak & Hold unit with the proper FuelTech's harness.
Not Yet Reviewed
$119.00
FuelTech pressure sensors are great for logging oil pressure, fuel pressure, boost pressure, or even exhaust back pressure on a turbo motor. The sensors will require an open ADC port on your ECU, or an auxiliary circuit to allow extra data to display on the computer screen and on your datalog files. These pressure sensors are available in a variety of PSI ranges.
Not Yet Reviewed
$129.00
FuelTech Davis 32T driveshaft split collars are the only collars on the market with 32 triggers, providing unparalleled resolution, speed, and accuracy. Utilizing 32 precision-machined teeth instead of magnets provides a very precise trigger on the edge of the trigger, as opposed to a variable magnetic field. These collars are available in various diameters. * Compatible with the following ECUs: FT600 / FT550 / FT500 / FT500LITE / FT450
Not Yet Reviewed
$175.00
FuelTech has several engine management systems available to fit a variety of applications. They also offer steering column mounting brackets to simplify the installation of your ECU. The brackets are CNC-machined from billet aluminum, making them extremely lightweight and durable, as well as great looking. They will securely hold your unit, keeping vital info easily visible and accessible. Choose the FuelTech steering column mounting brackets designed for your ECU model.
Not Yet Reviewed
$249.00
FuelTech Peak and Hold 4A/1A injector drivers are 4-channel low impedance units designed to keep up with the demands of today's high horsepower engine fuel injectors. The Peak and Hold circuit opens the injector with a high current (Peak) pulse--and then switches the current down to hold the injector open to feed the volume. Additional details: * Controls up to 4 injectors with 1.5 to 3 ohms of impedance * 8 Bosch 160 lbs./h (1600cc) injectors (2 per channel) * 4 Siemens 83 lbs./h injectors * 4 MSD injectors (with 2 ohms impedance per injector) Contents of package: * 1 Peak and Hold 4A/1A * 1 operation and installation guide * 1 mounting kit (four rubber mounts, four washers and four 1/4 in. nuts) * 6 ft. Peak and Hold unterminated harness (optional) * 1 FuelTech black carbon fiber sticker
( 1 )
$219.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FTSPARK-8 unterminated harnesses are ready to wire your high-energy CDI. Wire from scratch with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$189.00
FuelTech cam sync bracket kits are a mounting bracket and magnetic kit designed only for use with a raised cam BBC when utilizing a camshaft belt drive and requires MSD ignition Hall Effect pickup (sold separately). The mounting hardware is included in the bracket kit for installation. Please note that some modifications may be required to correctly fit your application.
Not Yet Reviewed
$119.00
FuelTech SparkPRO ignitions are available in versions from one to eight ignition outputs. They feature high-energy inductive ignition to be used with ignition coils without igniter (dumb coils). The modules deliver high voltage at the coil's primary, up to 430 V. Additional details: * Each SparkPRO channel can be connected to only one coil at a time * Compatible with any programmable ECU that has dwell control * Cannot be used with stock ECU * Dimensions: 115 x 90 x 33mm Kit contents: * One SparkPRO ignition * One operation and installation guide * One 6.5 ft. SparkPRO unterminated harness (optional) * One FuelTech black carbon fiber sticker
Not Yet Reviewed
$169.00
—
$249.00
FuelTech connector kits are essential components for achieving peak electrical performance and reliability in high performance engine applications. Their FT700 connector kits are recommended for those upgrading to the FT700 ECU and need to modify their existing harness for the new connector. Kits include: * Four FT700 connectors (A, B, C, and D) * 120 FT700 Terminals * One CAN A female connector kit with gold plated terminals * Two CAN B female connector kits
Not Yet Reviewed
$169.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
