Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Ford Performance Parts 2007-12 Mustang GT500 One-Piece Driveshafts
Ford Performance Parts 2007-12 Mustang GT500 one-piece driveshafts deliver peak endurance and optimum strength for increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 51.653 in. (1,312 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Off-road use only
( 1 )
$854.99
Ford Performance Parts Hi-Flow Throttle Bodies
Ford Performance Parts Hi-Flow throttle bodies provide more air and produce more power than stock throttle bodies, while also providing good drivability and low-speed control. Available in a variety of styles, number and size of venturis, materials and finishes, they are precision-machined to ensure consistency and accept all stock sensors and controls. Depending on application, features include: * All factory sensors installed; no need to tear apart your original throttle body * Calibrated for idle air flow using the same procedure as production throttle bodies * Consistent high flow * Great looks and underhood "bling" * Validation through hundreds of hours of dyno, racing, and street performance driving * All cfm ratings calibrated at 28 in. of water, measured on SuperFlow SF-1020 flow bench
( 22 )
$835.99
—
$869.99
Ford Performance Parts Accessory Drive Kits
Ford Performance Parts offers accessory drive kits for the (FEAD) 7.3L Godzilla V8 crate engine. These front accessory drive kits come with the alternator, alternator bracket, power steering pump, drive belt, belt tensioner, idler pulley, and required installation hardware—saving you the valuable time of having to obtain and match all parts individually. You can depend on Ford Performance for the parts and accessories that your engine needs.
Not Yet Reviewed
$796.99
Ford Performance Parts Gen 3 Coyote Cylinder Heads
Ford Performance Parts Gen 3 Coyote cylinder heads provide increased intake and exhaust airflow when compared to earlier generation Coyote engines. Heads come fully machined and ready to install.
( 2 )
$884.99
Ford Performance Parts Bronco Beadlock Trim Ring Kits
Add unique style and an awesome look to your Ford Bronco with a beadlock trim ring kit from Ford Performance. These kits include five aluminum rings that are designed to fit the 2021 Bronco Sasquatch (675) and Badlands (64W) trim package with factory beadlock-capable wheels. They're available in a variety of color options.
( 2 )
$921.99
Ford Performance Parts 7.3L Super Duty Low-Profile Intake Manifolds
Ford Performance Parts 7.3L Super Duty low-profile intake manifolds offer better hood clearance with a straight-out inlet that will fit under an S550, and deliver an increase in horsepower and torque over the stock Godzilla manifold. Built with the latest technologies, the "plug-and-play" manifolds are easy swaps for stock units, they are lightweight, and safe for boost, nitrous, or pretty much any application. Ford Performance Parts 7.3L low-profile intake manifolds utilize the 92mm GT500 throttle body (not included) and custom calibration is required. They are topped with a removable, branded Ford performance plaque.
Not Yet Reviewed
$927.99
Ford Performance Parts 2019-20 Ranger Power Packs
The Ford Performance calibration for 2019-20 Ranger Ecoboost is a 50-state legal calibration that increases power and improves driveability throughout the RPM range. This kit is Ford Performance-engineered and dyno-tested and improves driveability and throttle response throughout RPM range and features an optimized shift schedule. You can expect a horsepower gain of 45 hp @ 4,500 rpm and torque gain of 60 lbs.-ft. @ 2,500 rpm. USA and Canadian vehicles come with a Ford Performance 3-year or 36,000 mile warranty from new vehicle in-service date when installed by a Ford dealer or ASE/Red Seal certified technician. Tire size configurable up to 265/70/17, as recommended with the M-18000-R Ranger Off-Road Suspension Leveling Kit. This calibration is only compatible with premium fuel. Power Pack also includes: * Ford Performance Pro Cal 4 calibration delivery tool M-12655-F * Ford Performance high-flow K&N air filter
( 4 )
$772.99
Ford Performance Parts by ARB Bronco Underhood Air Compressor Kits
Ford Performance by ARB Bronco on-board dual air compressor kits are perfect for airing up your tires after a fun day of off-road/overland adventures. These underhood mounting kits include the ARB twin compressor, switch, manifold, and bracket. The brackets are 100 percent bolt-on and use factory mounting points, keeping the assembly tucked away, yet easily accessible. For those who like to wander over to the wild side, Ford Performance Parts by ARB Bronco underhood air compressor kits help your vehicle recover from off-road adventures with accessories built for exploring assistance. Other features, items, and specifications include: * Currently supports both 2.3L and 2.7L engines * Blue air inflation hose with a quick press fitting and air chuck * Powdercoated black finish * Convenient switch location next to compressor * Detailed instructions with parts lists, torque specifications, and step-by-step images
( 2 )
$810.99
Ford Performance Parts 4.6L 3-Valve Performance Intake Manifolds
These Ford Performance Parts 4.6L 3-valve performance intake manifolds feature high-flow runners and an open plenum design for maximum flow, while still fitting underneath stock Mustang hoods. They are manufactured from lightweight composite plastic and have been tested up to 20+ psi; perfect for use in forced induction applications. Ford Performance Parts 4.6L 3-valve performance intake manifolds include a set of intake gaskets to complete the installation. Additional technical information: * Works well with Ford Performance M-6550-3V hot rod camshafts, M-6049-N3VPA high performance CNC-ported 3V cylinder heads, and M-9926-3V 62mm throttle bodies * Less heat soak than aluminum intakes * MAP sensor mounting boss for speed-density applications * Calibration required (not included) * Throttle body not included * Does not fit with Ford Performance strut tower braces
( 11 )
$786.99
Ford Performance Parts Oil Pans
Whether you're dressing up or simply replacing an old oil pan on your vehicle, Ford Performance Parts has the oil pan for you. These oil pans are available in several finishes for a variety of applications, so there's sure to be one to suit your needs and your style.
( 100 )
$765.99
