Availability
Ford Performance Parts mini high-torque starters are a great addition to your car. They feature a high-output motor with internal gear reduction that provides more cranking power than stock, yet is 30 percent smaller. Their smaller size brings the weight down 5 lbs. from OE starters and provides a great deal more header clearance. These are the perfect starters for vehicles with high-compression engines and tight-fitting headers.
( 82 )
$251.99
—
$432.99
These Ford Performance Parts spark plug wire sets feature a spiral-wound suppression core for low resistance and minimum spark loss. They have tough silicone insulation to withstand high temperatures and voltage loss for minimum crossfire, and are highly resistant to fuels, oils, and solvents. Other features include 45 degree plug boots (most applications), stainless steel distributor cap terminals, and a coil wire (if applicable).
( 699 )
$50.99
—
$117.99
Ford Performance Parts has the complete solution for your drivetrain upgrade needs with the 5.0L Coyote manual power module and T-56 manual transmission combo kit, which includes: * Gen 4X 5.0L Coyote crate engine * Tremec 6-speed manual transmission * Complete engine controller and wiring harness (control pack) It's Next Generation 5.0L power all in one complete powertrain kit. The crew at Ford Performance have spec'd out a kit to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Gen 4X 5.0L Coyote V8 with a state-of-the-art Tremec 6-speed transmission, plus all the electronics and hardware to finish the installation. The engine features direct and port fuel injection, twin independent variable camshaft timing, and a lightweight plasma transferred wire arc spray aluminum engine block. Coyote power modules simplify both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play and simplifies conversions to a modern electronically fuel injected V8 high performance engine. Details and/or specs: * Gen 4X 5.0L Coyote engine * 460 hp at 7,000 rpm * 420 lbs.-ft. torque at 4,600 rpm * 12.0:1 compression ratio * Aluminum block * Boss 302 alternator kit * Starter and starter index plate * Control pack PCM and installation kit is tunable for power upgrades * Runs on pump gas * Steel Quicktime bellhousing * Roller pilot bearing * Tremec 6-speed transmission 2.66 1st gear * Clutch fork / throw-out bearing * Clutch kit * Billet flywheel * Installation hardware * Note: Engine will be fitted with an automatic flexplate. Included is a billet flywheel, to be installed on engine before installation into vehicle.
Not Yet Reviewed
$19,699.99
Ford Performance Parts has a range of spark plugs to meet your performance needs. Designed for use in engines operated at sustained high rpm or with higher-than-stock cylinder combustion pressures, these plugs are made from quality materials and are designed to provide the spark that you need to fire up your Ford. Depending on the application, features of Ford Performance Parts spark plugs may include: * Available in heat ranges colder than the stock spark plugs * Sold individually and in sets * Pre-gapped at the factory * Offered in a variety of thread sizes * More robust construction for race applications
( 34 )
$56.99
—
$126.99
Keep your 7.3L Godzilla engine firing on all eight cylinders with Ford Performance Parts Godzilla ignition coil and wire sets. They feature OEM coils, wires, and hardware. To maintain optimal performance of your Ford engine, choose Ford replacement parts.
( 2 )
$319.99
Ford Performance Parts ignition coil sets are stock replacement coils for a variety of late model Ford V8 engines. They're required when installing some Ford Performance heads on 2005-07 and early 2008 Mustang GTs originally equipped with "High Thread" design heads. Fit your vehicle with the right ignition coil sets designed by the original maker and rest assured that the performance will be exceptional.
( 19 )
$264.99
—
$520.99
Ford Performance Parts colder heat range (HR8) spark plugs are ideal for 2021-and-up F-150 5.0L Coyotes with variable displacement. A .032 in. gap is recommended for supercharged applications. Order a set for your truck. (Note: Plugs do not fit Mustang Coyote engines.)
( 1 )
$144.99
Ford Performance Parts Coyote 5.0L crate engine control packs are designed to properly wire Ford Performance Parts 5.0L modular crate engines. They include a specially-calibrated PCM, an electronic throttle control accelerator pedal, an air intake assembly, an MAF sensor, and all necessary wiring and harness adapters. You can eliminate the complexity of wiring modular 5.0L crate engines with one of these Ford Performance Parts engine control packs. Additional technical information: * Control pack M-6017-504V available for 2015-16 5.0L 4V Coyote engines, M-6007-M50A and M-6007-A50NAA 5.0L 4V Ti-VCT crate engines with manual transmission; M-6007-A50SCA and truck engines require modifications * Control pack M-6017-A504VA available for 2011-14 5.0L 4V Coyote engines, M-6007-M50 and M-6007-A50NA 5.0L 4V Coyote crate engines with manual transmission (adds wiring for Speed Dial M-4209ADPT-AC to pick up transmission output speed); M-6007-A50SC, M-6007-A50XS, Boss 302 and truck engines require modifications * Supercharged engines, M-6007-A50SC, M-6007-A50SCA, M-6007-A50XS, Boss 302 and truck engines require custom calibration * Electronic throttle control accelerator pedal eliminates throttle cable routing problems * Unique controls pack harness replaces stock body harness and is designed for street rod installation * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM (remanufactured) with Ford Performance calibration requires return-type fuel system, will not work with returnless fuel system * Installation of this PCM in a 2011-16 Mustang GT will result in a no-start condition * Not for use with a 2015-16 F150 engines
( 2 )
$2,083.99
—
$2,149.99
Ford Performance Parts 2018 Coyote 5.0L control packs take the complexity and mystery out of wiring the engine. These engine management systems include a powertrain control module (PCM) with Ford Performance calibration, as well as an electronic throttle control accelerator pedal (which eliminates throttle cable routing problems). A unique control pack harness replaces the stock body harness and is designed for custom vehicle builds. It features an OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis. Mustang Coyote 5.0L control packs include a power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses, and HEGO sensors. Additional notes: * PCM with Ford Performance calibration requires a return-type fuel system; it will not work with a return-less fuel system * Supercharged versions, modified engines, and modified applications require custom calibration * Installation of this PCM in a 2018 Mustang GT will result in a no-start condition * For 2011-14 engines, use control pack M-6017-A504VA * For 2015-17 manual transmission version control pack, use M-6017-504V * For 2015-17 automatic transmission version control pack, use M-6107-M50A
( 2 )
$2,201.99
Take the complexity out of wiring your Gen 4X 5.0L Coyote crate engine with a Ford Performance Parts control pack. Ford Performance Parts 2021-23 Coyote 5.0L control packs are available to run the crate engine with a Mustang 10R80 automatic transmission or a manual transmission. Choose the control pack needed for your build. Control packs feature: * PCM with unique Ford Performance calibration * Electronic throttle pedal eliminating cable routing issues * Unique harness replaces the stock body harness and is designed for custom vehicle installation * OBD-II port for trouble-shooting/code reading * Power distribution module, air box, air inlet tube, upper and lower radiator hoses, and HEGO sensors are included * Requires return-type fuel system
( 1 )
$2,462.99
Ford Performance Parts 2015-17 Coyote 5.0L control packs take the complexity and mystery out of wiring a late model 5.0L Coyote engine! Here are the specs: * Designed to run 2015-17 5.0L 4V Ti-VCT Coyote auto transmission engines with 6R80 Mustang GT 6-speed auto transmission. Manual transmission engines require engine harness GU5Z-12A581-EF, available from your local Ford dealer. * Includes PCM with Ford Performance calibration * Includes electronic throttle control accelerator pedal that eliminates throttle cable routing problems * Unique control pack harness replaces stock body harness and is designed for custom vehicle builds * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses, and HEGO sensors * PCM with Ford Performance calibration requires return-type fuel system. Will not work with returnless fuel system
( 2 )
$2,162.99
Ford Performance Parts 5.0L Coyote auto trans engine wiring harnesses can easily power up your 2016-17 Coyote engine! Designed specifically for the late Gen II Coyote engines, these auto trans wiring harnesses allow your 5.0L Coyote engine to be used in conjunction with a 6R80 automatic transmission. The harnesses feature factory-style connectors for a quick plug-and-play installation—plus, Ford Performance pre-looms the harness for a factory fit and finish! Fitment Note: Only fits late-style coil-on-plugs built 2/24/16 and later. Also fits Ford Performance M-12029-M50E coil-on-plugs.
( 1 )
$282.99
Ford Performance Parts 5.0L Mustang Boss 302 alternator kits include special high performance components as used on the production 2012-13 Mustang Boss 302 and are designed to operate at much higher rpm. The alternator uses a one-way clutch to prevent belt hop-off during upshifts. The included tensioner has higher tension for better belt control, and the larger diameter pulley slows down the armature speed, reducing drag and parasitic horsepower loss. Alternator belt and mounting hardware are included.
( 13 )
$334.99
Ford Performance Parts Coyote 5.0L high-output alternator kits include a higher tension belt tensioner, idler pulley, belt, and mounting hardware. They feature the same 200 amp high-output alternator used on 2018-19 Mustang GTs with heated/cooled seats and fit Mustang 5.0L Coyote engines (as well as many other Ford Performance crate engines). Don't leave your engine starving for amps; order a high-output alternator Coyote 5.0L kit.
( 3 )
$479.99
Take the complexity and mystery out of wiring your late model, 2018-2023 5.0L Mustang Coyote engine with the Ford Performance Coyote 5.0L control packs! These engine management systems are designed to run Ford Performance 5.0L Mustang Coyote engines. 2018-2023 Coyote 5.0L control packs features: * Includes PCM with Ford Performance calibration * Includes electronic throttle control accelerator pedal which eliminates throttle cable routing problems * Unique control pack harness replaces stock body harness and is designed for custom vehicle builds * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM with Ford Performance calibration requires return type fuel system, will not work with returnless fuel system * Supercharged versions, modified engines, and modified applications require custom calibration Note: Not for use with 2018+ F-150 Engines. Installation of this PCM in a 2018+ Mustang GT will result in a no-start condition.
Not Yet Reviewed
$2,346.99
Ford Performance Parts 2007-14 Mustang SVT 4V ignition coil sets are designed for use on 2007-12 Shelby GT500 5.4L DOHC and 2013-14 Shelby GT500 5.8L DOHC engines. These coils are direct replacements for the stock coils, so you can be assured of OEM performance.
( 9 )
$295.99
Enhance the performance of your 2.7L engine in your late-model Bronco! The Ford Performance engineered and dyno-tested calibration delivers their promise of more power and increased performance without sacrificing reliability. Product details: * Improved throttle response throughout RPM range * Optimized shift schedule * Peak torque = 433 lbs.-ft. at 3,500 rpm * Peak power = 355 hp at 5,500 rpm * Ability to change tire size up to BFG 37x12.5R17 KO2 (579 revolutions per mile). Additional modifications required. * Ability to change axle ratio/FDU up to 5.38 * Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module * For U.S. and Canadian vehicles * Not available in California for 2022-23 model year vehicles * M-12655-F ProCal 4 delivery tool included * The M-9603-B23 calibration is also available * Premium fuel required NOTES: *Reverting to stock calibration with non-production tires/gears will result in error codes. Loss of functionality of critical systems may occur. * Calibration and ProCal 4 tool are VIN locked. * ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode." * ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
( 1 )
$754.99
Upgrade your Bronco Raptor 3.0L EcoBoost engine's capabilities with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance specifically for 2022-2024 Bronco Raptor * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * Elevates throttle response for an exhilarating driving experience * Delivers 536 lbs.-ft. of torque at 3,000 rpm for outstanding performance * Provokes 455 peak horsepower at 5,500 rpm for thrilling power * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * ProCal 4 delivery tool included for a seamless installation * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.
Not Yet Reviewed
$734.99
Ford Performance offers spark plug dividers to keep everything neat and tidy looking under the hood of your vehicle. These engine spark plug wire dividers are a universal 2-3-4 wire design and are made from very high-quality plastic material. Sold as a set of six pieces, each set comes with two of each size spark plug wire dividers and features a white "Ford Oval" logo.
( 3 )
$20.99
—
$21.99
Ford Performance wire looms are the perfect and clean way to keep those messy ignition wires under control. These spark plug wire looms feature chrome plated steel loom brackets, on top of each loom bracket sits polymer separators with the renowned Ford Racing logo. Dress up your engine and protect your plug wires with a set of these Ford Performance wire looms.
( 4 )
$21.99
Ford Performance Parts ignition coil covers dress up 5.0L 4V Ti-VCT Coyote and almost any 4.6L/5.4L/5.8L DOHC engines with coil-on-plug ignition systems. They're available in a variety of finishes and logos—for applications from 1996 and up. Let the competition know you're serious about performance!
( 13 )
$56.99
—
$182.99
Tweak the software in your 2.0L EcoBoost engine and wake up your Focus ST. Ford Performance Parts 2013-18 Ford Focus ST calibration and spark plug kits will give you additional power with a more natural engine sound. Kits include a Ford Performance Parts cold spark plug set and the ProCal3 hand-held tuner (requires a laptop and internet access for calibration). Additional notes: * Maximum of 90 lbs.-ft. torque increase at 2800 rpm on 93 octane fuel * Significant torque increase up to 4200 rpm * Revised sound symposer software and calibration * Requires premium (91 octane or higher) fuel only * Spark plugs gapped to 0.028 in. (0.71mm) * Powertrain calibrations are developed and supported for U.S. and Canadian vehicles only * Calibration is 50-states emissions legal * Eligible for limited warranty when installed by a Ford or Lincoln dealer or ASE certified technician
( 6 )
$362.99
Have you ever wished you could replace that rusty old distributor hold-down clamp? Well now you can with these great looking Ford Performance Parts hold-down clamps. Available for a variety of Ford engines, the clamps, and their included bolts, are made of heavy-duty steel and triple chrome plated for great looks and corrosion protection. We can't think of a better way to dress up your engine and keep your timing accurate.
( 22 )
$14.99
Ford Performance ProCal 4 calibration delivery tools are designed for use with Ford Performance Control Packs as a diagnostic/data logging tool. The programmer also allows download/delivery of Ford calibrations and performance tunes. ProCal 4 includes a windshield mount and a cable that plugs into the OBDII port in order to communicate with your vehicle. The ProCal 4 does not ship with any calibration or tune files, and must be registered with Ford Performance Parts to download the ProCal 4 software. (Software is only compatible with Windows 7 or newer operating systems.) Additional features include: * High-resolution touch screen with intuitive graphical interface * Speedometer correction for gear/tire changes * Real-time engine data display * Real-time data logging
Not Yet Reviewed
$468.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
