Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Fleece Performance Parts and Accessories
Fleece Performance Silicone Turbo Drain Tube Kits
Eliminate the installation headaches associated with non-flexible OE drain lines with Fleece Performance silicone turbo drain tube kits. Each kit features a larger inner diameter, smooth silicone hose for longevity and durability, and black anodized billet aluminum flange with integral O-ring for leak-free performance. Fleece's patent pending drain hose simplifies turbocharger installation and will ensure proper oil drainage from your turbocharger. Kits include new fasteners and are designed for use with all Cummins equipped Dodge Ram factory-style turbochargers, VGT or HX35 and HY35-style turbochargers, as well as aftermarket drop-in replacements, like Fleece's Cheetah Series. Choose the turbo drain line kit designed for your Cummins.
( 4 )
$94.99
—
$99.99
Fleece Performance Turbo Drain Tube Kits
Put the finishing touches on your truck with high-quality Fleece Performance turbo drain tube kits. The tubes are braided stainless steel for durability on the exterior, and reinforced with rubber tubing for flow and maximum flexibility. The kits contain everything you need to connect an S300/S400 turbo drain back to the factory drain location on the Cummins block when using a fixed vane geometry turbo. Kit contains: * Drain tube (20 in. end-to-end) * Cummins turbo drain tube adapter * Turbo drain flange adapter * Turbo drain gasket * 7/8 in.-14 to -10 AN fitting * Two 3/8in.-16 flange head bolts * Two 10mm x 1.5 flange head bolts
( 3 )
$99.95
Fleece Performance Turbo Oil Feed Lines
Fleece Performance turbo oil feed lines ensure that your system gets an adequate oil supply. They offer replacements for your OE setup, as well as remote kits that prevent premature bearing failures. All include extra-flexible, smooth bore PTFE hose and high-quality fittings. The remote kits will also include a stock oil feed plug and an oil galley rifle fitting. Whether you're replacing or upgrading, Fleece Performance turbo oil feed lines are available for your application.
( 1 )
$69.99
—
$99.99
Fleece Performance Fuel Injector Return Line Repair Fittings
Fleece Performance offers fuel injector return line repair fittings for a variety of applications. For instance, the plastic factory injector return fitting on the 2011-and-up 6.7L Powerstroke engines is susceptible to breakage from heat, vibration, rough handling, and frequent disconnections for fuel filter maintenance. Upgrade this fitting and eliminate the risk of a broken fuel line with Fleece's heavy-duty billet aluminum injector return fitting. Featuring a dual O-ring internal design and serviceable barb fitting, these injector return fittings will ensure you're not left stranded with a broken, non-repairable fuel line. Additional details: * Heavy-duty, machined billet aluminum housing * Dual O-ring internal design for increased sealing * Serviceable billet aluminum barb fitting * Easy to install and remove * Sold individually or in a set of 5 * Application notes: Kits are designed to work with both OEM and aftermarket underhood fuel filter assemblies
( 2 )
$64.99
—
$69.99
Fleece Performance Heater Core Hose Kits
Eliminate the troublesome and leaky quick-connect heater core line on your truck with the latest OEM+ solution from Fleece Performance. Their heater core replacements hose and fitting kits are direct replacements for the problematic stock hose and quick-connect style fitting. The silicone hose and stainless steel fitting will provide a reliable solution to fix the leaks once and for all. Fleece kits include Permatex thread sealant and two new hose clamps.
Not Yet Reviewed
$69.99
Fleece Performance S400 Intercooler Adapters
When installing a Fleece Performance S400 turbo with intercooler, you're going to need the proper adapters. These 90-degree discharge adapters include a clamp and O-ring to ensure you get the proper seal. Don't lose out on performance!
( 1 )
$60.00
Fleece Performance Fuel Filter Delete Blocks
Upgrade your fuel system with these Fleece Performance fuel filter delete blocks. If you have an aftermarket fuel filtration system, such as an Air Dog or a FASS, your factory fuel filter is no longer necessary—is only becomes an extra restriction and an eyesore. These delete blocks will remove that restriction and help clean up under the hood of your truck. They mount perfectly to allow the factory fuel return lines to be used without any relocating or bending. The blocks also feature a port for the factory WIF (water in fuel) sensor and a 9/16-18 O-ring port for a dual CP3 return line.
( 2 )
$59.95
—
$79.25
Fleece Performance Wiring Pigtails
Fleece Performance offers wiring pigtails and replacement connectors for a wide range of vehicles—including many Dodge, Chevrolet, GMC, Ford, and Ram models from the 1990s and up. These replacement parts are ideal for sensors, starter solenoids, cooling fans, and other components under the hood. Fully automated in-house wire cutting and terminal crimping ensure you get the highest quality connectors and pigtails to get your car or truck back on the road quickly. Order the model that corresponds to your electrical application.
( 4 )
$56.99
—
$59.99
Fleece Performance Water Neck Block-Off Plates
Fleece Performance water neck block-off plates are thicker than the stock plate and feature an integrated square cut O-ring with no gasket required. In contrast, the OE covers are prone to leakage over time. Fleece block-off plates are an upgrade for the rear engine cover on your Duramax V8 and will stop the coolant leaks for good!
( 2 )
$55.00
Fleece Performance Fuel Injection Wiring Harnesses
Fleece Performance fuel injection wiring harnesses are offered for many different applications. Produced in-house, Fleece's manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacements to get your truck or car back on the road quickly. Choose the wiring harness designed for your application.
( 2 )
$69.99
—
$72.13
Fleece Performance Thermostat Housings
Fleece Performance thermostat housings have an auxiliary port with plug to allow you to customize your coolant routings. Two elbow options are available as direct replacements for specific model years of RAM trucks with 5.9L or 6.7L Cummins, and in specific Fleece coolant bypass kits.
Not Yet Reviewed
$89.99
Fleece Performance Custom Air Filters
Fleece Performance custom air filters are OEM system upgrades to more serious aftermarket performance cold air intakes that will provide huge benefits. An increase in horsepower and better gas mileage are probably the most important advantages. These innovative filters feature a full round inlet radius that provides for a smooth transition, while allowing for a larger, cleanable cotton 8-ply filter with more surface area. The result is better filtration and airflow.
( 1 )
$74.99
Fleece Performance MAP Sensor Spacer Kits
Here's the problem: On the L5P Duramax, because of the direct placement of the MAP sensor into the intake air stream from the factory, soot buildup becomes an ongoing maintenance problem. This requires the sensor to be routinely cleaned or replaced. The solution is Fleece Performance MAP sensor spacer kits. Fleece's spacer moves the sensor from the direct intake air stream to reduce soot buildup over time and eliminates the need to routinely clean or replace the sensor. The spacer block also integrates a 1/8 in. NPT port to allow for installation of an auxiliary boost pressure sensor. Fleece Performance kits include mounting block, fastener, seal ring, and O-ring port plug.
Not Yet Reviewed
$68.99
Fleece Performance GM Automatic Transmission 20-Pin Pigtails
Fleece Performance GM Automatic transmission 20-pin pigtails feature 12 in. leads labeled with the pin positions to aid in installation and they include 20 heat-sealable butt-style connectors. These Fleece replacements are produced in-house with fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck back on the road quickly.
Not Yet Reviewed
$99.99
Fleece Performance Crankshaft Barring Tools
Turn over your Cummins with ease with a Fleece Performance crankshaft barring tool. These flywheel turning tools are much easier to use than the barring tool that interfaces the flywheel housing and starter ring gear. To use: simply remove the four bolts holding on the damper, install this tool, reinstall the bolts, and torque to spec. You'll never back a bolt out of the damper when trying to reach TDC and overshoot. In addition, these barring tools are especially useful when removing and reinstalling a transmission. There's no need to use a pry bar on the starter ring gear to rotate the engine to R&R converter bolts. Additional features include: * Built from 1018 steel * Electroless nickel plated for corrosion resistance * Accepts 1/2 in. drive ratchet * Designed to be used with factory crank bolts and roll pins * No need to remove after installed * Works with Vibratech Fluidampr, as well as factory dampers
( 3 )
$74.99
Fleece Performance Wiring Harness Extensions
Gain additional flexibility in your harness routings with Fleece Performance extension harnesses. Produced in-house, Fleece's manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your vehicle back on the road quickly. Choose the harness needed for your wiring application.
Not Yet Reviewed
$59.95
—
$59.99
Fleece Performance Transmission Cooler Lines
Fix your leaking transmission lines with Fleece Performance transmission cooler lines. They are heavy-duty, high flow, flexible transmission lines. Direct replacements for OEM lines, the kits come complete with everything needed to get the job done right the first time. Kits include transmission lines, fittings, and zip ties. If you have an OEM replacement or aftermarket radiator, Setrab fittings may be required (sold separately).
( 10 )
$75.99
—
$94.99
Fleece Performance Modified LB7 Intake Horns
Increase your LB7 engine's potential with a Fleece Performance Modified LB7 intake horn. On back-to-back dyno pulls, these simple but effective air inlet elbows showed an increase of 15 hp. That's about the cheapest 15 hp from a bolt-on you'll find anywhere! The high-flow horns are manufactured from durable materials and can be easily installed.
( 2 )
$99.75
Fleece Performance High-Pressure Fuel Lines
Don't ruin excellent engine modifications by putting a new bend in old fuel lines. Fleece Performance high-pressure fuel lines are OEM-quality, look great, and come with M14 x 1.5 fittings. Use them for straight lines, and get one of our quality benders (not included) for perfect angles and a professional appearance. Fleece 8mm high-pressure fuel lines are available in lengths ranging from 7 in. to 24 in.
Not Yet Reviewed
$52.00
—
$79.99
Fleece Performance Universal 5 in. Intake Manifold Elbows
Fleece Performance universal 5 in. intake manifold elbows are available in several styles molded from top-quality plastic or rubber. The rubber models include stainless steel band clamps, and the plastic versions are available with or without provisions for common MAF sensor mounting and stainless steel socket head screws. All Fleece universal elbows are ideal for custom routings and installations.
Not Yet Reviewed
$84.99
—
$93.99
Fleece Performance NSBU Pigtails
Broken connectors, intermittent connections, or frayed wiring can cause your diesel to have poor reliability. Fleece Performance Engineering pigtails are produced in-house and offer an OEM+ quality repair for common failure points. Fleece Performance NSBU (neutral safety back up) connector(s) with 6 in. pigtails include heat-sealable butt-style connectors. These replacements are manufactured with fully automated wire cutting and terminal crimping, ensuring the highest quality to get your truck or car back on the road quickly. Select NSBU pigtail designed for your vehicle.
Not Yet Reviewed
$69.99
—
$79.99
Fleece Performance Secondary MAP Sensor Spacers
Some L5P 6.6L Duramax vehicles have a secondary MAP sensor. The problem: Its direct placement into the intake air stream from the factory causes the soot buildup to become an ongoing maintenance problem, requiring routine cleaning or replacement of the sensor. The solution: Fleece Performance secondary MAP sensor spacers. They move the sensor from the direct intake air stream to reduce soot buildup over time and eliminate the need to routinely clean or replace the sensor. Each kit includes mounting block (spacer), fastener, and O-ring.
Not Yet Reviewed
$68.99
Fleece Performance Oil Cooler Adapters
Here's the problem: The original equipment oil cooler adapter relies on a metal gasket on the oil cooler that over time is prone to leaking as the cooler flexes. Your solution is Fleece Performance oil cooler adapters. They utilize an integral square-cut seal ring on the oil cooler mating surface in place of the leak-prone gasket, providing a superior seal. They also feature slotted mounting holes on one end to allow for easier installation. Problem solved!
Not Yet Reviewed
$99.00
Fleece Performance Coolant Bypass Hoses
Fleece Performance offers several coolant bypass hose options for replacement. The selection is made from quality materials, EPDM, black nylon braiding, or stainless steel braiding. Many are direct replacements for their coolant bypass kits. Choose the proper fit for your diesel truck.
Not Yet Reviewed
$84.99
—
$89.99
