Availability
Fleece Performance turbo oil feed lines ensure that your system gets an adequate oil supply. They offer replacements for your OE setup, as well as remote kits that prevent premature bearing failures. All include extra-flexible, smooth bore PTFE hose and high-quality fittings. The remote kits will also include a stock oil feed plug and an oil galley rifle fitting. Whether you're replacing or upgrading, Fleece Performance turbo oil feed lines are available for your application.
( 1 )
$69.99
—
$99.99
Eliminate the installation headaches associated with non-flexible OE drain lines with Fleece Performance silicone turbo drain tube kits. Each kit features a larger inner diameter, smooth silicone hose for longevity and durability, and black anodized billet aluminum flange with integral O-ring for leak-free performance. Fleece's patent pending drain hose simplifies turbocharger installation and will ensure proper oil drainage from your turbocharger. Kits include new fasteners and are designed for use with all Cummins equipped Dodge Ram factory-style turbochargers, VGT or HX35 and HY35-style turbochargers, as well as aftermarket drop-in replacements, like Fleece's Cheetah Series. Choose the turbo drain line kit designed for your Cummins.
( 3 )
$94.99
Put the finishing touches on your truck with high-quality Fleece Performance turbo drain tube kits. The tubes are braided stainless steel for durability on the exterior, and reinforced with rubber tubing for flow and maximum flexibility. The kits contain everything you need to connect an S300/S400 turbo drain back to the factory drain location on the Cummins block when using a fixed vane geometry turbo. Kit contains: * Drain tube (20 in. end-to-end) * Cummins turbo drain tube adapter * Turbo drain flange adapter * Turbo drain gasket * 7/8 in.-14 to -10 AN fitting * Two 3/8in.-16 flange head bolts * Two 10mm x 1.5 flange head bolts
( 3 )
$99.95
Put the finishing touch on your truck by easily connecting the turbo to the factory drain location on your Cummins block with high quality Fleece Performance drain tube adapters.
( 3 )
$19.99
Fleece Performance auxiliary fuel filter and line kits include everything you need to properly route, plumb, and filter fuel for your Cummins. They will improve accessibility to the fuel filter, as well as reduce your ongoing maintenance cost with a lower cost Donaldson filter. Choose the kit designed for your Cummins engine. Kit includes: * Donaldson 3 micron fuel filter and water separator * Filter base with integral mounting * Distribution filter block/filter coupler * Push Lock hose and all necessary AN and barb fittings * CP3 Feed fittings for 5.9L and 6.7L (not included in all kits)
Not Yet Reviewed
$349.00
Fleece Performance auxiliary heated fuel filter and line kits come with everything you need to properly route, plumb, and filter fuel for your diesel, including an integral high-flow fuel heating element and Water-In-Fuel (WIF) sensor. They will improve accessibility to the fuel filter, as well as reduce your ongoing maintenance cost with a lower cost Donaldson filter. Choose the kit designed for your Cummins engine. Kit includes: * Donaldson 3 micron fuel filter and water separator * Fuel filter base with integral heater and mounting hardware * Push Lock hose and all necessary AN and barb fittings * CP3 Feed fittings for 5.9L and 6.7L * Water-In-Fuel (WIF) sensor and adaptation harness
Not Yet Reviewed
$449.00
Why convert your LML's fuel system from a CP4 to a CP3? Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms—resulting in costly repairs for owners when a CP4 fails. You can improve your LML Duramax's reliability and fueling capability, as well as avoid costly failure with Fleece Performance LML CP3 conversion kits. They provide OEM fit-and-finish features, like Fleece's exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and their valley feed line to support aftermarket lift pump applications. Fleece Performance LML CP3 conversion kits are offered with or without pump and the pump kits come in two different style pumps—a Bosch CP3 injection pump or Bosch CP3 pump with heavy-duty 10mm cam. Choose the kit that is right for you. All kits include: * CP3 to rail high pressure fuel line * High-flow CP3 feed and return fuel fittings * Preformed fuel feed and return fuel hoses * CP3 mounting adapter * Dosing injector distribution block, feed and return lines * FCA extension harness * Low pressure fuel feed line * Hardware kit
Not Yet Reviewed
$1,999.00
—
$2,599.00
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 7 )
$649.00
—
$1,099.00
Convert to a more convenient spin-on style filter and lower your ongoing filter maintenance costs with Fleece Performance underbed fuel filter assemblies. They upgrade your factory filtration with an anodized billet aluminum filter base and Donaldson spin-on canister-style filter, along with Water-In-Fuel (WIF) sensor, and integral high-flow fuel heater option. There are no additional lines to route, cut, or install, mounting in the factory location and mating directly to all factory fuel lines and WIF sensor circuitry. The Donaldson filter offers improved efficiency at low micron levels, while enduring peak water separation. Select the Fleece assembly designed for your vehicle.
Not Yet Reviewed
$379.00
Fleece Performance offers fuel filter bypass assemblies for the under hood filter assembly on the Ford F250/350/450/550 6.7L Powerstroke! These assemblies include a heavy-duty anodized billet aluminum bypass block and quick-disconnect fittings. These drop-in replacement fuel filter bypass assemblies are for the factory under hood filter—absolutely no cutting, splicing, or modifications are required. If you are running an aftermarket lift pump or auxiliary fuel filtration and are looking for the cleanest manner to eliminate the crack prone under hood filter, these fuel filter bypass assemblies from Fleece Performance are perfect for you! Product Overview: * Includes heavy-duty anodized billet aluminum bypass block and quick-disconnect fittings * Designed to fit 2011-2024 F250/350/450/550 with 6.7L Powerstroke * The 2011-2016 model trucks use only one inlet and one outlet fitting * For 2017-2024 trucks, an additional quick disconnect fitting is provided for the required additional fuel return * Drop-in replacement for the factory under hood filter—no lines to cut or modify * This product removes the underhood filtration supplied by the OEM and should only be used in conjunction with auxiliary fuel filter systems that meet or exceed the OEM's overall fuel filtration specifications
( 1 )
$148.99
Upgrade your fuel system with these Fleece Performance fuel filter delete blocks. If you have an aftermarket fuel filtration system, such as an Air Dog or a FASS, your factory fuel filter is no longer necessary—is only becomes an extra restriction and an eyesore. These delete blocks will remove that restriction and help clean up under the hood of your truck. They mount perfectly to allow the factory fuel return lines to be used without any relocating or bending. The blocks also feature a port for the factory WIF (water in fuel) sensor and a 9/16-18 O-ring port for a dual CP3 return line.
( 2 )
$79.25
Fleece Performance regulated return systems take their standard fuel distribution blocks to the next level by fully integrating a high-flow pressure regulator. This feature, in combination with high-flow aftermarket electric fuel pumps (without built-in pressure regulation), provides more consistent fuel pressure at the CP3. The kits also have one additional return line port and one additional feed line port. The extra return line port allows you to remove the factory fuel pressure relief valve hard line and fuel injector return galley hard line to provide clearance for high-flow side draft intakes, common on competition engines. If you're looking for something beyond your average fuel distribution block, Fleece Performance regulated return systems are your answer.
Not Yet Reviewed
$618.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
