Availability
Flaming River manual rack and pinions are built from lightweight aluminum castings—and feature chrome plated center tubes and two mounting holes. Designed to meet the standards of professional street rod and race car chassis builders, they weigh less than 15 lbs. each. These rack and pinions are a great way to streamline the engine compartment while maintaining smooth, responsive steering.
( 53 )
$305.99
—
$526.99
Special Offer
Flaming River tilt floor shift steering columns feature large tube diameters and compact shrouds to create a unique custom look. Designed specifically for use with floor shifters and available in a variety of styles, lengths, and shaft sizes, they come complete with a billet dress up kit (tilt, turn signal lever, and hazard knob), and wiring. They are manufactured from high-quality 304 grade stainless steel, will never rust, and are available in a variety of finishes--including a paintable mill finish, black powdercoated, or polished. Mill finish columns are shipped chemically clean and can be painted to match or highlight any interior with only minor preparation. Key column units (see Ignition Key Location above) include an integrated ignition key located at the 3 o'clock position, with no welded-on attachments or extra relays required. Keyed columns are complete with a key assembly, wiring, and ignition switch.
( 107 )
$501.99
—
$529.99
Flaming River power steering hose kits are offered in several packages to fit your application. They include braided stainless steel hose with a PTFE inner liner and zinc plated fittings for maximum protection against corrosion. No matter what your setup, these kits provide an installation with a clean, polished appearance.
( 1 )
$321.99
—
$382.99
Flaming River Mustang steering shafts utilize two smooth needle-bearing universal joints, a prefabricated shaft that bolts directly to the OEM column, and a weldless intermediate shaft for easy installation. This design eliminated the rag joint for better steering response and appearance. Some of these shafts are available in steel and aluminum for power or manual rack and pinions.
( 22 )
$291.99
—
$346.99
From classic designs to the latest in steering wheel styling, these Flaming River steering wheels will make you want to "grab the wheel" at every opportunity. They come available in several sizes and a variety of spoke configurations, as well as your choice of the finest materials. Whether you select the mahogany or Italian leather wheels, they will set off any vehicle's interior.
( 36 )
$346.99
—
$529.99
Flaming River tilt column installation kits are specifically designed to help install a Flaming River tilt column into your vehicle. These quality steering components are available in many different applications to fit your needs.
( 6 )
$283.99
—
$451.99
Finish off your power steering system with one of Flaming Rivers remote power steering reservoirs. These polished aluminum reservoirs feature a threaded cap and machined billet brackets for a high quality finished look.
Not Yet Reviewed
$293.99
Finally--here are faithful reproductions of the classic Tuff wheels found in the 1971-73 Dodge Challenger and Plymouth 'Cuda models. Flaming River Mopar Tuff steering wheels are dimensionally identical to the original 14 in. factory wheels, with an accurate reproduction of the 3-spoke dish design. The center/spoke assembly is CNC laser-cut from stainless steel and formed and polished. Tuff wheels utilize the original horn mount and button assembly and mount directly to the OEM E-body canister-style column.
( 2 )
$415.99
—
$443.99
Flaming River offers a variety of low-profile single or double-joint needle-bearing chromoly U-joints. These steering components are designed and manufactured to outlast pin-and-block universal joints in racing applications. They have a reduced diameter for vehicles where clearance and weight are primary concerns, and they do not require lubrication. Order the style, size, and finish you prefer. Features include: * Black oxide finish for corrosion resistance * 400 ft./lbs. strength rating * Accommodates up to a 35 degree angle for the single joint and up to 80 degrees for the double
( 22 )
$259.99
—
$362.99
These Flaming River splined steering shafts are manufactured in your choice of steel alloy or stainless steel for strength and cosmetics. Steel alloy versions are available in natural or nickel plated finishes, while the stainlees steel versions are natural finish only. The shafts are manufactured in 2 in. increments, from 4 in. up to 36 in. The splines are 2 in. long on both ends, giving you room to trim them down if necessary.
( 11 )
$448.99
Flaming River Vibration Resistor U-joints utilize a bushing system made of thermoplastic rubber to absorb vibration or "road feel" that travels through the steering system. This unique bushing is resistant to oil, salt, and weather conditions. Finished in polished, or satin; these U-joints are available in a variety of shaft end configurations. Order the model suitable for your application.
( 6 )
$279.99
—
$322.99
Flaming River Watch Dog automatic battery disconnect switches are capable of handling 300 amps of current continuously and are versatile in their ability to handle both 12 V and 24 V systems. Utilizing bistable magnetic latch technology, the Watch Dog switches secure their on/off positions without current draw and require over 80G of force to mechanically separate the contacts. Having some of the highest International Protection ratings of IP67 and IP69K, Flaming River Watch Dog automatic battery disconnect switches ensure the strongest protection against dust and moisture. They also feature built-in programmable time delay settings and a manual emergency toggle switch with a system status LED indicator.
( 1 )
$331.99
Flaming River steering shaft universal joint kits let you customize the length of the steering shaft required for your vehicle. They feature billet universal joints for the steering box or rack and pinion and the steering column. The kits are available in different spline and shaft diameters to fit your specific application.
( 3 )
$319.99
—
$515.99
Flaming River has the solution for your 1st generation Mustang if height of the suspension has been altered from the original specs. These 1965-70 Mustang bump steer kits are designed specifically for use with their rack and pinion conversion kits with Granada spindles--and are designed to assist you in re-aligning your steering geometry and improve handling. Simply replace your current outer tie rod ends with the new tie rod ends, using the provided spacers to adjust the angle as needed. These adjustable outer tie rod end replacements feature 6061 T-6 aluminum, fully machined sleeve with a black anodized finish, and a PTFE-lined 5/8 in. heim joint that never needs lubrication. A 4140 steel pin is machined with the correct taper for the Granada spindle.
Not Yet Reviewed
$294.99
Flaming River steering couplers are ideal for picking up header clearance by eliminating the old rag joint connected to your stock steering box. They are made of steel and are nickel plated for superior corrosion resistance. These steering couplers provide an easy installation for your new or existing setup.
( 4 )
$336.99
—
$343.99
Flaming River stainless steel U-joints are constructed from carefully selected 303 grade stainless for its strength, superior corrosion resistance, and shine. The steering components have such a precision-machined finish that looks great right out of the box—natural, polished, or satin. These U-joints are available in standard and double-joint styles, with dozens of shaft end configurations. Order the model suitable for your application.
( 38 )
$323.99
—
$362.99
Flaming River offers variable pressure power steering pumps designed to work with their power steering racks. By reducing pressure at higher rpm, you get maximum control during highway driving—and easy steering in parking situations. The pumps are available in a choice of styles, with or without pulley included, to fit your application.
( 1 )
$313.99
—
$449.99
Are you adding a custom steering wheel to your ride? Flaming River can make it a whole lot easier. Their great looking aluminum steering wheel adapters come in billet and forged flavors with bright, highly polished finishes. They're available in several styles, including those for 3, 5, and 6-bolt steering wheels.
( 43 )
$251.99
—
$278.99
Stop battery drain with a Flaming River low-voltage battery disconnect! These switches automatically disconnect auxiliary loads when the battery has drained past a safe, user-specified threshold. This threshold stops parasitic drains within the system that would completely drain your battery, leaving you with enough charge to start the vehicle or perform other tasks. Simply engaging the ignition or charging the battery will automatically reconnect the battery to your vehicle. The battery will remain connected while the vehicle is operating and can be manually controlled by a dash-mounted push button. Product details: * Automatic disconnect through battery voltage measurement. Disconnects auxiliary loads when battery has drained past a specified threshold. (This is a safe battery level designed to allow the user to restart the vehicle.) * Battery charging will automatically reconnect the load * Positive voltage from the ignition line will prevent load disconnect while the vehicle is operating * Manual disconnect operated by dash mounted toggle ON/OFF switch * System status can be monitored via LED indicator * 1-3 mA current draw while monitoring battery voltage * Thermal protection from overheating * Environmentally sealed device for maximum life span (IP6K7/IP69K ratings) * Includes 4-way wire harness (13 ft. long) with connections to vehicle ignition, ground, command button, and indicator light
Not Yet Reviewed
$297.99
Ideal for your steering system, these DD-type intermediate steering shafts from Flaming River can be cut to any length, eliminating the need to pre-measure. They're manufactured from pre-ground alloy steel for strength and cosmetics.
( 29 )
$257.99
—
$409.99
Flaming River offers steering shaft adapter kits for conversion from manual to power steering—and from power to manual, if you prefer. The kits include a coupler to fit the steering box, a connecting shaft, and a column universal joint. Order the style, size, material, and finish recommended for your application.
Not Yet Reviewed
$296.99
—
$473.99
Flaming River Billet-Joint steering universal joints are CNC-machined from aircraft-quality billet steel to precision tolerances. They feature a sealed, needle-bearing design that will outlast normal steering joints, while providing positive steering response with no backlash. The U-joints are available in a variety of styles, finishes, and shaft end configurations. Order the model suitable for your application.
( 163 )
$268.99
—
$326.99
Flaming River power steering slave cylinders are designed for use with the Flaming River power steering control valve. They are manufactured from high-quality steel and are nickel plated for durability. If you're adding power steering to your classic vehicle, you're going to need one of these Flaming River power steering slave cylinders to finish the job.
( 1 )
$503.99
Flaming River straight motorsports steering columns have been specially designed for competition use. They are manufactured from mill finish 304 Grade stainless steel tubing with a 1.75 in. diameter. The columns feature a 3/4 in.-36-spline output shaft, and an upper 3/4 in. smooth end designed to accept a quick-release steering wheel hub. The Flaming River straight motorsports steering columns are available in classic or collapsible designs to fit your race vehicle's needs.
( 1 )
$323.99
—
$482.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
