Availability
Flaming River Microsteer electric power assisted steering kits can easily be fitted to virtually any vehicle where manual steering currently exists. There's no need to change your steering rack or fit a hydraulic system. These kits allow you to adjust the amount of assistance by using a rotary potentiometer—or you can make the system speed sensitive by connecting a wheel speed signal to the tuning box. A mode selection switch on the box allows you to choose your preferred method—manual or wheel speed. Flip the switch and make your vehicle easier to steer or boost the horsepower a bit with a Flaming River Microsteer electric power assisted steering kit. Items and notes: * Motor/gearbox unit (MGU) * Electronic control unit (ECU) * Tuning box * Wiring harness * 11/16 in.-36 input and output shafts
( 3 )
$1,799.99
—
$1,944.99
Flaming River 1955-57 Chevy power rack and pinion cradle kits make your dream ride a dream to drive! Flaming River makes your classic even better with their unique and easy-to-install cradle kits. The true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location--no suspension modifications are needed. Plus, by mounting the rack on the cradle system, you are reinforcing the Chevy chassis and providing increased ground clearance. Kits are available without columns or with your choice of polished or paintable tilt columns--something your '57 never had! Tri-five Chevys are probably some of the most recognized American classics, and to restore one is many an enthusiast's dream. Give your 1955-57 Chevy perfect modern steering from Flaming River 1955-57 Chevy power rack and pinion cradle kits.
( 4 )
$1,854.99
Flaming River Billet-Joint steering universal joints are CNC-machined from aircraft-quality billet steel to precision tolerances. They feature a sealed, needle-bearing design that will outlast normal steering joints, while providing positive steering response with no backlash. The U-joints are available in a variety of styles, finishes, and shaft end configurations. Order the model suitable for your application.
( 163 )
$82.50
—
$326.99
Flaming River can equip your vehicle with a steering gear box—whether you own a muscle car, race car, or vintage ride. These units are constructed from totally new components and feature improved designs. Needle bearings, precision worm and nuts, stronger casting designs, and quicker ratios are just a few of the great features found in these steering boxes. They're available in a variety of styles, steering ratios, spline sizes, and other options. Order the model recommended for your application.
( 22 )
$275.50
—
$1,304.99
Flaming River VDOG variable angle gears have a strong aluminum housing—available in either cast or billet—and the output shaft is 3/4-36 in. for compatibility with universal joints. Each unit is gear driven without any chains or sprockets. It can be mounted in horizontal or vertical positions—ideal for cab-over vehicles, T-Buckets, and specialty builds with big motors and tight firewall clearance. Order the material and finish you prefer. Additional features: * 90 degree gear box with a 35 degree variable angle shaft * Articulating ball design for maximum adjustability * 1:1 ratio to maintain rack and pinion or steering box gear ratio * Award-winning: 2019 SEMA Best Engineered New Product and Best New Street Rod Product
Not Yet Reviewed
$836.99
—
$1,489.99
Ideal for your steering system, these DD-type intermediate steering shafts from Flaming River can be cut to any length, eliminating the need to pre-measure. They're manufactured from pre-ground alloy steel for strength and cosmetics.
( 29 )
$49.99
—
$409.99
Flaming River Mustang steering shafts utilize two smooth needle-bearing universal joints, a prefabricated shaft that bolts directly to the OEM column, and a weldless intermediate shaft for easy installation. This design eliminated the rag joint for better steering response and appearance. Some of these shafts are available in steel and aluminum for power or manual rack and pinions.
( 22 )
$291.99
—
$832.99
Flaming River offers a variety of low-profile single or double-joint needle-bearing chromoly U-joints. These steering components are designed and manufactured to outlast pin-and-block universal joints in racing applications. They have a reduced diameter for vehicles where clearance and weight are primary concerns, and they do not require lubrication. Order the style, size, and finish you prefer. Features include: * Black oxide finish for corrosion resistance * 400 ft./lbs. strength rating * Accommodates up to a 35 degree angle for the single joint and up to 80 degrees for the double
( 22 )
$78.99
—
$362.99
Finish off your power steering system with one of Flaming Rivers remote power steering reservoirs. These polished aluminum reservoirs feature a threaded cap and machined billet brackets for a high quality finished look.
Not Yet Reviewed
$293.99
Flaming River has the solution for your 1st generation Mustang if height of the suspension has been altered from the original specs. These 1965-70 Mustang bump steer kits are designed specifically for use with their rack and pinion conversion kits with Granada spindles--and are designed to assist you in re-aligning your steering geometry and improve handling. Simply replace your current outer tie rod ends with the new tie rod ends, using the provided spacers to adjust the angle as needed. These adjustable outer tie rod end replacements feature 6061 T-6 aluminum, fully machined sleeve with a black anodized finish, and a PTFE-lined 5/8 in. heim joint that never needs lubrication. A 4140 steel pin is machined with the correct taper for the Granada spindle.
Not Yet Reviewed
$268.99
Flaming River steering couplers are ideal for picking up header clearance by eliminating the old rag joint connected to your stock steering box. They are made of steel and are nickel plated for superior corrosion resistance. These steering couplers provide an easy installation for your new or existing setup.
( 4 )
$66.99
—
$343.99
These Flaming River splined steering shafts are manufactured in your choice of steel alloy or stainless steel for strength and cosmetics. Steel alloy versions are available in natural or nickel plated finishes, while the stainlees steel versions are natural finish only. The shafts are manufactured in 2 in. increments, from 4 in. up to 36 in. The splines are 2 in. long on both ends, giving you room to trim them down if necessary.
( 11 )
$63.50
—
$448.99
Flaming River steering shaft universal joint kits let you customize the length of the steering shaft required for your vehicle. They feature billet universal joints for the steering box or rack and pinion and the steering column. The kits are available in different spline and shaft diameters to fit your specific application.
( 3 )
$292.99
—
$515.99
Flaming River T-bucket steering boxes are specially reverse-designed for T-bucket steering systems. They are manufactured from steel for improved strength and come available in black or chrome finishes. The Flaming River T-bucket steering boxes feature an all-new, needle-bearing design for longer life and less vibration. The high ratio of 20:1 provides for quick, accurate steering under any driving conditions.
( 1 )
$626.99
—
$1,213.99
Flaming River quick ratio steering boxes for Nova are designed to be bolt-on applications. They give you smooth steering with 3 1/2 turns lock-to-lock, compared to the stock 6 turns lock-to-lock. Flaming River Quick Ratio steering boxes for Nova feature quick ratio valving and include a mounting plate for a simple bolt-in installation.
Not Yet Reviewed
$1,027.99
Make some room for your large tube headers with Flaming River steering shaft tongues. Longer in length, these tongues are for use with their Mustang shaft kits and they offer the perfect way to extend universal joints down from your steering column to create needed space.
( 3 )
$131.99
Flaming River offers variable pressure power steering pumps designed to work with their power steering racks. By reducing pressure at higher rpm, you get maximum control during highway driving—and easy steering in parking situations. The pumps are available in a choice of styles, with or without pulley included, to fit your application.
( 1 )
$313.99
—
$449.99
Flaming River offers steering shaft adapter kits for conversion from manual to power steering—and from power to manual, if you prefer. The kits include a coupler to fit the steering box, a connecting shaft, and a column universal joint. Order the style, size, material, and finish recommended for your application.
Not Yet Reviewed
$296.99
—
$473.99
Flaming River offers power steering control valve assemblies for a variety of classic car applications. These valves include a grease fitting, female threaded holes for the power steering lines, and a threaded attachment for a tie rod end. The cylinder control valves will fit most stock applications without any modifications. Order the model recommended for your vehicle.
( 3 )
$599.99
—
$944.99
Flaming River steering box mounting brackets are designed to fit your Flaming River steering box. They are manufactured from thick steel and feature a protective finish for durability. The brackets are available for either manual or power steering style boxes.
Not Yet Reviewed
$119.99
Flaming River quick ratio steering kits for Nova are designed to be bolt-on applications. They give you smooth steering with 3 1/2 turns lock-to-lock, compared to the stock 6 turns lock-to-lock. Kits include: * Quick ratio steering box * Mounting plate * 17 in. long, 5-position tilt steering column * Steering column mount * Steering shaft with hardened universal joints
( 1 )
$1,799.99
—
$2,062.99
Flaming River offers power steering pump kits for a variety of applications, including many Corvette models from the 1960s, '70s, and '80s. These replacement pumps are designed to work with their power rack and pinion kits. Each pump kit includes: * Power steering pump with V-belt pulley * Pump mounting bracket and hardware * Power steering reservoir * Braided stainless hose kit
Not Yet Reviewed
$930.99
Swap your steering box setup for a lighter, more responsive modern steering system in your classic. Flaming River 1970-81 Camaro power rack and pinion cradle kits utilize your Camaro's original inner and outer tie rod ends, maintaining the original pivot position and making installation easier. No cutting, welding, or drilling to the chassis is required--simply bolt the cradle into the existing steering box holes. The kits include your choice of tilt key columns or no-column, a stronger 1 in. rack gear, a billet-joint and column adapter, mounting hardware, a polished aluminum mounting reservoir, and a power steering pump and pulley. All included to allow you more than 6 in. of travel and a full turning radius. Enjoy driving your classic car with this upgrade-- Flaming River 1970-81 Camaro power rack and pinion cradle kits.
( 2 )
$2,572.99
—
$3,687.99
Flaming River 1965-70 Mustang power rack and pinion cradle kits can upgrade your classic Pony's steering system. The patented conversion kits are stronger, lighter, and more responsive. They also retain the full factory turning radius and offer more travel than your OE system! Mustang power cradle kits feature a welded cradle that bolts right in—no cutting, drilling, or welding is required! They're available to fit with the original or Granada spindles, and come with or without columns that are paintable or polished. Each kit also includes mounting hardware, wiring connectors, universal joints, a power steering pump, a billet bracket and pulley, and a polished aluminum reservoir. All are fluid and pressure-tested before shipping. Order the model recommended for your Mustang application.
( 8 )
$2,019.99
—
$3,374.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
