Availability
FiTech is quickly becoming a go-to source for fuel injection systems due to the company’s reputation for delivering high performance fuel delivery systems by leveraging...
FiTech is quickly becoming a go-to source for fuel injection systems due to the company’s reputation for delivering high performance fuel delivery systems by leveraging several OEM parts and OEM-level software to keep units affordable. Summit Racing carries a large selection of FiTech EFI systems for your fuel-injected application, including FiTech Go EFI systems, FiTech MeanStreet EFI systems, and FiTech GoStreet EFI systems, as well as FiTech’s Fuel Command Center Sump Kits, inline fuel filters, frame mount fuel pumps, 2x4 Dual-Quad EFI systems, and more! See for yourself what all the buzz is about. Order...
FiTech is quickly becoming a go-to source for fuel injection systems due to the company’s reputation for delivering high performance fuel delivery systems by leveraging several OEM parts and OEM-level software to keep units affordable. Summit Racing carries a large selection of FiTech EFI systems for your fuel-injected application, including FiTech Go EFI systems, FiTech MeanStreet EFI systems, and FiTech GoStreet EFI systems, as well as FiTech’s Fuel Command Center Sump Kits, inline fuel filters, frame mount fuel pumps, 2x4 Dual-Quad EFI systems, and more! See for yourself what all the buzz is about. Order your new FiTech EFI system and fuel delivery components from Summit Racing today!
If you're running a supercharger, blower, or nitrous, and want to ditch the carburetor, you'll need a FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection system. These units mount the self-adjusting ECU on the throttle body, fit any 4-barrel intake manifold, and are designed to support 250 to 600 hp engines. Each system has a hand-held controller with a touch screen for initial setup, a throttle linkage that suits most transmissions, and is manufactured with OE engineering. Models are available with or without a fuel pump. Increased performance is at hand with FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems. Additional Go EFI 4 Power Adder features: * Throttle body is boost-ready * Can change air/fuel ratios and ignition timing on-the-fly * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Two adjustable fan control switches * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors * Wet flow swirl spray annual discharge obtains complete atomization * Built-in pressure regulator * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Nitrous and boost timing retard strategies and target A/F options * Air conditioning idle speed input kick-up * Many safety features and accessories for nitrous tuning control * Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous * Complete tuning from Pro Laptop software * Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor * Designed for applications making at least 6 in. of vacuum at idle
( 56 )
$1,277.00
—
$1,494.99
More power! FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems are for gearheads interested in major power for road courses or the racetrack, while maintaining overall drivability. These systems combine eight high-flow injectors with an annular discharge increased to 20 streams to handle the massive flow. They fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 1200 hp. The Power Adder Plus features a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it, and the ability to change air/fuel ratios and ignition timing on the fly. To obtain complete atomization, FiTech uses a swirl spray annular discharge called Wet Flow technology, spraying the fuel in from multiple directions. Go EFI 8 systems with mounted ECUs offer spark control without the need for an external spark box or special distributor. To lower temperatures and extend the unit's life, FiTech uses a voltage-controlling fuel pump control, reducing the juice under low loads. Each system has a hand-held controller with touch-screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. Take on the day, no matter what it brings—with FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems. Additional features include: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Two adjustable fan control switches * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace GM-type sensors and Bosch 4.2 wideband oxygen sensors * Nitrous and boost timing retard strategies and target A/F options * Air conditioning idle speed input kick-up * Many safety features and accessories for nitrous tuning control * Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous * Designed for applications making at least 6 inches of vacuum at idle. * Complete tuning from Pro Laptop software, with 8GB of data-logging
( 37 )
$1,597.00
—
$1,727.99
When you are getting serious about 4-digit horsepower under your hood with boost or nitrous, Go EFI 8 Power Adder 1,200 hp systems are up to the task. Plus, with FiTech's master kits you also get a high-pressure fuel delivery solution. FiTech Go EFI 8 PA 1,200 hp system Dual Force fuel injection master kits pair two powerful components designed to support serious horsepower. Go EFI 8 Power Adder bolt-on throttle body features eight high-flow injectors capable of fueling up to 1,200 hp. It is supplied with FiTech's Pro-tuning software and features the ability to data-log information. To ensure the best atomization of the fuel injection, the annular discharge design is increased to 20 jet streams to support the fuel volume required under boost, and has a built-in 2.5 BAR MAP sensor to handle the increased boost pressures, along with built-in timing controls based on boost or a nitrous input. The throttle body system includes handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info. Go Fuel Dual Force fuel system supports up to 1,600 hp. The dual-pump system works in concert with a mechanical or electric fuel pump to supply the Force Fuel reservoir with fuel where it is then fed through two internal 340 lph pumps to feed the EFI system. Dual internal regulators keep the pressure at 58 psi which is ideal for reliable EFI performance. The assembly holds a 1/2 gallon of fuel to submerge the efficient pumps with no chance of fuel starvation. A strong, versatile mounting bracket is included for easy mounting under the hood.
Not Yet Reviewed
$2,036.99
FiTech Nitro-Port Series cast intake manifolds are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. These manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.
Not Yet Reviewed
$715.00
FiTech Go EFI 2x4 Power Adder 1200 hp fuel injection systems are for the guys who have 671 and 871 roots superchargers or make up to 1200 hp naturally aspirated on their dual-quad setup. These easy self-tuning systems work out of the box on your 2x4 blower plate as an inline setup or can be side mounted using custom linkages. Also, the kits are a bolt-on for the most popular normally aspirated dual-quad and tunnel ram manifolds, including the Edelbrock line of dual-quad manifolds, without any adapters! They fit and look like they belong there because they were designed to fit from the start. One throttle body handles all of the brains, while the second holds four additional injectors. These can also be used in cross ram and tunnel ram configurations. Application notes: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, etc. engines making 250 hp up to 1200 hp with a dual quad intake manifold. Replacement for any dual-quad carburetors for engines with 250 hp up to 1200 hp. Use the same size air cleaner you would normally use for your dual-quad carburetors. Product features: * 2.5 BAR internal MAP sensor * Suitable for up to 1200 hp * (8) Flow matched injectors * (2) Fan control * Blower and turbo ready * Support for nitrous * Boost and nitrous timing * Ignition timing control * Built-in pressure regulator * Air/fuel ratio tuning * Pro-tuning laptop software * Bright aluminum or matte black finish * NOTE: Some models include Go Spark CDI box Kit contents: (2) Diecast throttle body (1) Oxygen bung kit (1) Hand-held controller (1) CTS sensor (1) Hand-held controller cable (1) CTS adapter (1) Windshield mount (1) Mini USB cable (1) 4+2-Pin Connector (2) Return plug (1) Oxygen sensor (1) Gasket kit
( 11 )
$2,236.00
—
$2,347.99
FiTech Ultimate Rebel LS 500 hp EFI fuel injection systems are available with or without a transmission control. These cutting-edge fuel injection solutions combine high performance with a sleek and refined design. Building upon the success of the renowned FiTech Ultimate LS EFI system, the Rebel LS takes innovation a step further with its distinctive cleaner profile and enhanced features, making it the ultimate choice for modern engine conversions. Designed for enthusiasts seeking both power and aesthetics, the Ultimate Rebel LS EFI system redefines the look and performance of your LS-powered vehicle. The standout feature of the Rebel LS system is its sleek and streamlined appearance, which seamlessly integrates with the engine bay, providing a cleaner and more polished aesthetic. The redesigned fuel rail bracket adds to the visual appeal, offering a fresh and modern touch that complements any engine setup. Beneath its striking exterior, the Ultimate Rebel LS EFI system boasts the same advanced technology that FiTech is known for. Experience exceptional fuel delivery and engine control, optimizing your vehicle's performance and efficiency. These systems are tailored to LS engine conversions, ensuring a hassle-free installation process while delivering consistent and reliable results. Key features include: * Cleaner profile: The Ultimate Rebel LS EFI system is engineered with a refined design that seamlessly integrates into your engine bay, elevating the visual appeal of your vehicle * Thicker gauge manifold provides quieter injection * Redesigned fuel rail bracket: The innovative fuel rail bracket design not only enhances the appearance but also adds a touch of sophistication to your engine compartment * Advanced fuel injection technology: Benefit from FiTech's cutting-edge fuel injection technology, ensuring precise fuel delivery and optimized engine performance * Effortless installation: Designed specifically for LS engine conversions, the Rebel LS system offers a user-friendly installation process that minimizes downtime * Optimized performance: Unlock the full potential of your LS-powered vehicle with improved throttle response, increased horsepower, and better fuel efficiency * The most complete kit on the market; includes manifold, ECU, sensors, throttle body, harness, fuel rails, fuel pressure regulator, throttle cable brackets, and more * Boost/Nitrous compatibility: Equipped with 3 Bar MAP sensor (27 psi) * E85 compatible Kit contents: (1) Rebel LS1, LS2, LS6 low-profile intake manifold with MAP and IAT port (1) Ultimate LS 92mm throttle body with sensors (8) 36 LB injectors (1) LS ECU (1) LS1 fuel rail kit (1) Primary LS harness (2) EV1 injector sub harness (1) Oxygen sensor extension sub harness (1) 3 Bar MAP sensor (1) IAT sensor (1) LS1/LS2 knock sensor harness (1) Go EFI clamp-on oxygen sensor bung kit (1) Handheld monitor for ultimate LS (1) FiTech hand-held cable (1) FiTech USB to USB C cable (2) FiTech oxygen sensors (1) Premium magnetic handheld mount (1) Rebel intake throttle cable bracket with round hole (1) Rebel intake throttle cable bracket with stock GM cable notch (1) Go Fuel tight fit regulator with pressure gauge
Not Yet Reviewed
$1,900.00
—
$2,824.99
Whether you're looking for something that's safe for nitrous use or adjustable start retard, the FiTech Advanced CDI ignition box is perfect and comes with a high-energy coil to maximize your engine's potential. As part of FiTech's Go-Spark Series, this ignition box and coil combo offers utility for both the street and strip—with an adjustable spark energy output (275mJ for the street, 585mJ for the strip), customizable rev limiters, precise timing control, and an informative LED display for live rpm or battery voltage. The high-energy coil enhances CDI performance. Go-Spark Advanced CDI features: * Adjustable spark energy output: 275mJ for the street or 585mJ for the strip * Rev limiter settings for Burnout, Launch, and Max Engine Over-Rev Protection * Adjustable Start Retard for quick, easy cranking to ease the load on your starter * Single Nitrous/Step Retard input for safe Nitrous Oxide System use * Digitally controlled for precise timing controlled * LED shows live rpm or battery voltage, with buttons for adjustments * Coil produces up to 50,000 Volts * Coil can mount almost anywhere * Better reliability and performance
Not Yet Reviewed
$445.99
FiTech Nitro-Port cast LS3 750 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 2007 and up.
Not Yet Reviewed
$1,200.00
FiTech Ultimate Rebel LS 1,000 hp EFI fuel injection systems are available with or without a transmission control. These cutting-edge fuel injection solutions combine high performance with a sleek and refined design. Building upon the success of the renowned FiTech Ultimate LS EFI system, the Rebel LS takes innovation a step further with its distinctive cleaner profile and enhanced features, making it the ultimate choice for modern engine conversions. Designed for enthusiasts seeking both power and aesthetics, the Ultimate Rebel LS EFI system redefines the look and performance of your LS-powered vehicle. The standout feature of the Rebel LS system is its sleek and streamlined appearance, which seamlessly integrates with the engine bay, providing a cleaner and more polished aesthetic. The redesigned fuel rail bracket adds to the visual appeal, offering a fresh and modern touch that complements any engine setup. Beneath its striking exterior, the Ultimate Rebel LS EFI system boasts the same advanced technology that FiTech is known for. Experience exceptional fuel delivery and engine control, optimizing your vehicle's performance and efficiency. These systems are tailored to LS engine conversions, ensuring a hassle-free installation process while delivering consistent and reliable results. Key features include: * Cleaner profile: The Ultimate Rebel LS EFI system is engineered with a refined design that seamlessly integrates into your engine bay, elevating the visual appeal of your vehicle * Thicker gauge manifold provides quieter injection * Redesigned fuel rail bracket: The innovative fuel rail bracket design not only enhances the appearance but also adds a touch of sophistication to your engine compartment * Advanced fuel injection technology: Benefit from FiTech's cutting-edge fuel injection technology, ensuring precise fuel delivery and optimized engine performance * Effortless installation: Designed specifically for LS engine conversions, the Rebel LS system offers a user-friendly installation process that minimizes downtime * Optimized performance: Unlock the full potential of your LS-powered vehicle with improved throttle response, increased horsepower, and better fuel efficiency * The most complete kit on the market; includes manifold, ECU, sensors, throttle body, harness, fuel rails, fuel pressure regulator, throttle cable brackets, and more * Boost/Nitrous compatibility: Equipped with 3 Bar MAP sensor (27 psi) * E85 compatible Kit contents: (1) Rebel LS1, LS2, LS6 low-profile intake manifold with MAP and IAT port (1) Ultimate LS 102mm throttle body with sensors (8) 36 LB injectors (1) LS ECU (1) LS1 fuel rail kit (1) Primary LS harness (2) EV1 injector sub harness (1) Oxygen sensor extension sub harness (1) 3 Bar MAP sensor (1) IAT sensor (1) LS1/LS2 knock sensor harness (1) Go EFI clamp-on oxygen sensor bung kit (1) Handheld monitor for ultimate LS (1) FiTech handheld cable (1) FiTech USB to USB C cable (2) FiTech oxygen sensors (1) Premium magnetic handheld mount (1) Rebel intake throttle cable bracket with round hole (1) Rebel intake throttle cable bracket with stock GM cable notch (1) Go Fuel tight fit regulator with pressure gauge
Not Yet Reviewed
$2,190.00
—
$3,220.99
FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems with Force Fuel systems are a unique combination of a boost-ready throttle body and fuel injection upgrade convenience. The Power Adder systems allow you to ditch that old carburetor and keep your supercharger, blower, or nitrous setup. The Force Fuel system helps quench its thirst with easy hookup and versatile mounting. Blow away all the competition when you order the FiTech Easy Street 600 hp and Force Fuel systems combo designed to fit your boosted performance engine application. Includes: * FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems * FiTech Force Fuel systems
Not Yet Reviewed
$1,606.99
—
$1,879.99
FiTech Ultimate Rebel LS 750 hp EFI fuel injection systems are available with or without a transmission control. These cutting-edge fuel injection solutions combine high performance with a sleek and refined design. Building upon the success of the renowned FiTech Ultimate LS EFI system, the Rebel LS takes innovation a step further with its distinctive cleaner profile and enhanced features, making it the ultimate choice for modern engine conversions. Designed for enthusiasts seeking both power and aesthetics, the Ultimate Rebel LS EFI system redefines the look and performance of your LS-powered vehicle. The standout feature of the Rebel LS system is its sleek and streamlined appearance, which seamlessly integrates with the engine bay, providing a cleaner and more polished aesthetic. The redesigned fuel rail bracket adds to the visual appeal, offering a fresh and modern touch that complements any engine setup. Beneath its striking exterior, the Ultimate Rebel LS EFI system boasts the same advanced technology that FiTech is known for. Experience exceptional fuel delivery and engine control, optimizing your vehicle's performance and efficiency. These systems are tailored to LS engine conversions, ensuring a hassle-free installation process while delivering consistent and reliable results. Key features include: * Cleaner profile: The Ultimate Rebel LS EFI system is engineered with a refined design that seamlessly integrates into your engine bay, elevating the visual appeal of your vehicle * Thicker gauge manifold provides quieter injection * Redesigned fuel rail bracket: The innovative fuel rail bracket design not only enhances the appearance but also adds a touch of sophistication to your engine compartment * Advanced fuel injection technology: Benefit from FiTech's cutting-edge fuel injection technology, ensuring precise fuel delivery and optimized engine performance * Effortless installation: Designed specifically for LS engine conversions, the Rebel LS system offers a user-friendly installation process that minimizes downtime * Optimized performance: Unlock the full potential of your LS-powered vehicle with improved throttle response, increased horsepower, and better fuel efficiency * The most complete kit on the market; includes manifold, ECU, sensors, throttle body, harness, fuel rails, fuel pressure regulator, throttle cable brackets, and more * Boost/Nitrous compatibility: Equipped with 3 Bar MAP sensor (27 psi) * E85 compatible Kit contents: (1) Rebel LS1, LS2, LS6 low-profile intake manifold with MAP and IAT port (1) Ultimate LS 102mm throttle body with sensors (8) 36 LB injectors (1) LS ECU (1) LS1 fuel rail kit (1) Primary LS harness (2) EV1 injector sub harness (1) Oxygen sensor extension sub harness (1) 3 Bar MAP sensor (1) IAT sensor (1) LS1/LS2 knock sensor harness (1) Go EFI clamp-on oxygen sensor bung kit (1) Handheld monitor for ultimate LS (1) FiTech handheld cable (1) FiTech USB to USB C cable (2) FiTech oxygen sensors (1) Premium magnetic hand-held mount (1) Rebel intake throttle cable bracket with round hole (1) Rebel intake throttle cable bracket with stock GM cable notch (1) Go Fuel tight fit regulator with pressure gauge
Not Yet Reviewed
$2,190.00
—
$3,109.99
The FiTech Ultimate Rebel LS 750 hp EFI loaded intake manifold kits are a popular choice for enthusiasts looking to upgrade their LS engine's performance and aesthetics. These kits offer several benefits for LS engine conversions, including increased horsepower potential, improved airflow, and a cleaner engine bay appearance. The kits are designed for ease of installation and optimal performance, supporting up to 750 horsepower and offering features like E85 compatibility and boost/nitrous readiness, which makes them suitable for high-performance applications. Key benefits and advantages: * Modern engine management utilizes speed density metering for optimal performance * Billet fuel rails and 55 lb. injectors ensure reliable and consistent fuel flow * Boost/Nitrous compatibility—the system can handle boosted and nitrous applications, making it suitable for high-performance builds * E85 compatibility—supports E85 fuel, offering flexibility for different fuel preferences * Visual appeal—the low-profile intake manifold and redesigned fuel rail bracket enhance the overall appearance of the engine bay Kit components: * LS1/LS2/LS6 FiTech Rebel LS Fabricated Short Manifold (manifold, gaskets and hardware) * Ultimate LS 102mm throttle body with sensors * 55 lb. injectors * 3 Bar MAP sensor allows for boost and nitrous applications, expanding the performance potential of the engine * IAT sensor * Throttle cable bracket with round hole for new style LS intake * Throttle cable bracket with stock GM cable notch for new style LS intake with cable barrel clamp
Not Yet Reviewed
$995.00
FiTech Nitro-Port cast LS1 500 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.
Not Yet Reviewed
$1,200.00
FiTech Nitro-Port cast LS1 750 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.
Not Yet Reviewed
$1,200.00
FiTech Nitro-Port cast LS1 1000 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.
Not Yet Reviewed
$1,200.00
FiTech Nitro-Port cast LS3 500 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 2007 and up.
Not Yet Reviewed
$1,200.00
FiTech Nitro-Port cast LS3 1000 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 2007 and up.
Not Yet Reviewed
$1,200.00
FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS3 500 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.
Not Yet Reviewed
$2,245.00
—
$2,445.00
FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS3 750 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.
Not Yet Reviewed
$2,245.00
—
$2,445.00
FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS3 1000 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.
Not Yet Reviewed
$2,245.00
—
$2,445.00
FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS1 750 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.
Not Yet Reviewed
$2,245.00
—
$2,445.00
FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS1 500 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.
Not Yet Reviewed
$2,245.00
—
$2,445.00
FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS1 1000 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.
Not Yet Reviewed
$2,245.00
—
$2,399.00
When you are getting serious about 4-digit horsepower under your hood with boost or nitrous, Go EFI 8 Power Adder 1,200 hp systems are up to the task. And, with FiTech's master kits you also get a high-pressure fuel delivery solution to take your setup from conventional to EFI. FiTech Go EFI 8 PA 1,200 hp system Dual Force/Go-Spark fuel injection master kits pair two powerful components designed to support serious horsepower, plus an upgrade to high-powered sparks for improved combustion and power output. Go EFI 8 Power Adder bolt-on throttle body features eight high-flow injectors capable of fueling up to 1,200 hp. It is supplied with FiTech's Pro-tuning software and features the ability to data-log information. To ensure the best atomization of the fuel injection, the annular discharge design is increased to 20 jet streams to support the fuel volume required under boost, and has a built-in 2.5 BAR MAP sensor to handle the increased boost pressures, along with built-in timing controls based on boost or a nitrous input. The throttle body system includes handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info. Go Fuel Dual Force fuel system supports up to 1,600 hp. The dual-pump system works in concert with a mechanical or electric fuel pump to supply the Force Fuel reservoir with fuel where it is then fed through two internal 340 lph pumps to feed the EFI system. Dual internal regulators keep the pressure at 58 psi which is ideal for reliable EFI performance. The assembly holds a 1/2 gallon of fuel to submerge the efficient pumps with no chance of fuel starvation. A strong, versatile mounting bracket is included for easy mounting under the hood. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.
Not Yet Reviewed
$2,247.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
