Availability
FiTech Go Shift transmission controllers are standalone electronic transmission control kits. If you plan on upgrading your transmission and you're having trouble with the wiring, back up lights, or shift points, the new Go Shift system is for you. Now you can have the luxury of a modern transmission for better response, better fuel economy, and overall reliability thanks to this system.
( 10 )
$599.00
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 51 )
$567.00
FiTech has partnered with TANKS Inc. to make your EFI upgrade even easier with a comprehensive line of new FiTech Go EFI fuel tank kits. Fuel injection demands higher pressure from an electric fuel pump, and the best place to mount a pump is in the gas tank. FiTech's in-tank module is supplied with a 340 lph fuel pump to support up to 800 hp. The fuel pumps bolt directly into the tank's recessed mount, providing a modern EFI solution for hot rods, classic trucks and muscle cars. FiTech Go EFI fuel tank kits also include the following: * Direct-fit tanks feature internal baffles for constant fuel delivery * In-tank pump module secures the supplied 340 lph pump in the tank * -6 AN inlet/outlet that provides leak-free fuel line connections * Recessed sending unit and pump mount that provides added clearance
( 23 )
$638.00
—
$681.00
FiTech stainless steel fuel line kits are perfect for plumbing your vehicle for pump gas, methanol, ethanol, or alcohol. These braided, chemical-resistant flex lines are available in a natural or black finish, and they include aluminum fittings, 40 micron filter, and check valve. Order the fuel line diameter and length needed for your application.
( 2 )
$512.00
FiTech intake manifolds provide you with great manifold and fuel rail package to start your project. The low-profile intake manifold is fabricated from T-6061 aluminum with 102mm inlet and a 1,500 to 6,500 rpm powerband. The billet fuel rails include AN fittings and fuel crossover. FiTech includes hardware, as well.
( 5 )
$778.00
FiTech Force fuel systems make the upgrade to fuel injection easier! They simply connect to a stock mechanical or electric fuel pump, then supply the EFI system with high pressure through the use of an internal 340 lph (approximately 90 gph) pump. The strong, versatile bracket allows mounting under your existing fuel pump, which feeds the units. The assemblies hold a half-gallon of fuel to submerge the internal pump and keep it cool for long life, with no chance of fuel starvation. An internal regulator maintains the pressure at a consistent 58 psi—which is ideal for reliable EFI performance. Order a FiTech Force fuel system and forget about running a new feed line from the tank! Models are available in different configurations. Features, items, and specs: * Serviceable 10-micron fuel filter keeps the finest debris away from the injectors * 5 ft. of high-pressure fuel hose * AN fittings * Clamps * Precision-machined extrusion designed for strength and sealed tight * Easy-to-view fuel pressure gauge installed for quick checks * Heavy-duty wire terminals to complete the installation
( 18 )
$547.00
When it comes to converting to EFI, it's important for the fuel pump to be installed in a cool area and what better place than in the gas tank itself. The pump is cooled by the fuel, it's quieter plus there's no chance of fuel starvation. To help ease the installation of an in-tank pump, we offer a new Go Fuel In-Tank Module assembly. This universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The cut-to-fit bracket secures a 340 LPH pump capable of providing fuel to 600 horsepower engines. To ensure clean fuel is pulled into the pump, two size of sock/filters are provided, a standard 11 square-inch design as well as a large, 35 square-inch version. Go Fuel in-tank modules are a direct fit into fuel tanks offered by TANKS Inc.
( 25 )
$532.00
FiTech EFI 3x2 D-shaped air filter assemblies are ready-to-run right out of the box! Simple 2-barrel throttle bodies stick to the basics of drivability and reliability, while at the same time being designed to maximize airflow and inlet velocity. Each of the three individual assemblies feature a finned top and includes cast aluminum top and bottom, filter element, gaskets, studs, and fasteners, and filters that are washable and reusable. These air filter assemblies fit FiTech Go EFI 3x2 Tri Power fuel injection systems and will allow you to keep the muscle car look you love, while upgrading to modern-day EFI technology to boost fuel economy, without sacrificing performance.
Not Yet Reviewed
$624.00
FiTech Ultimate Rebel LS cathedral intake manifolds with fuel rails enhance the performance of LS engines equipped with cathedral port cylinder heads. The manifold optimizes airflow and ensures consistent fuel delivery, resulting in improved engine efficiency and power output, while the fuel rails provide a consistent fuel delivery solution. Paired under the hood they provide a perfect fusion of aesthetics and performance. Features: * Precision-engineered cathedral port design for optimal airflow * Integrated fuel rail mounting points for a clean installation * Designed to improve air velocity into the cylinder heads * Engineered to increase the volume of air entering the engine * Compatible with factory or aftermarket fuel lines
Not Yet Reviewed
$549.00
FiTech Nitro-Port Series cast intake manifolds are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. These manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.
Not Yet Reviewed
$715.00
FiTech offers LS Tri-Power fuel injected intake manifolds for a variety of applications. These units are designed for triple 2-barrel throttle bodies with a 2300 flange.
Not Yet Reviewed
$560.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
