Availability
Connect your FiTech computer to the new style hand-held with a FiTech data cable. This cable measures 6 ft. long and is essential when adding the new style hand-held to your FiTech EFI system.
( 8 )
$54.00
FiTech throttle cable brackets offer the best mounting and security for your FiTech EFI system. They are manufactured from strong steel and powdercoated black for lasting good looks.
( 17 )
$37.00
—
$39.00
FiTech offers replacement fuel injectors for a variety of applications, including EFI and LS fuel injection systems. O-rings are included. Order the injectors with the flow rate desired for your setup.
( 1 )
$47.00
FiTech offers a wide range of fuel injection parts, including these Go Fuel One Way check valves. Machined from aluminum with a black anodized finish, these fittings are installed in fuel lines to allow fuel to flow only in one direction and prevent lines from running dry. Order the inlet/outlet size needed for your plumbing application.
Not Yet Reviewed
$31.00
FiTech easy-install fuel bung and seal kits allow you to install a bung and -6 AN fitting to attach your return line into your fuel tank or filler neck without welding. All that's required is a 1/2 in. hole drilled in the desired location. Maintain your vehicle's performance with high-quality parts from FiTech.
( 11 )
$28.00
FiTech oxygen sensor bung assemblies offer a no-weld installation. Oxygen sensors are vital components that help you adjust to your engine's fuel/air ratio via the electronic control unit (ECU). With these easy-to-install kits, you're on your way to improved performance. Simply drill a hole in your exhaust, install the gasket and sensor fitting, and then secure with the band clamps. Voila! Now you can install an oxygen sensor without welding in a bung, thanks to FiTech.
( 22 )
$21.00
Monitor your fuel pressure using one of these FiTech analog fuel pressure gauges. They feature an easy-to-read white face with contrasting black numbers—and a red pointer to show you the actual fuel pressure you're running at.
( 30 )
$23.00
FiTech offers Go Fuel adapter fittings in a variety of sizes and attachment styles. Machined from aluminum with an anodized finish, the fittings are engineered to meet or exceed OEM specifications. Order the parts recommended for your application.
( 6 )
$24.00
FiTech fuel pump mounting brackets fit both 52mm and 60mm diameter pumps. These high-tech brackets feature billet construction, strong band clamp, and a set screw. Mounting screws are included.
( 15 )
$23.00
FiTech's cone style air filters feature an open design of the conical filter that allows the engine to pull air from both inside the cone, as well as from the outside perimeter. That nearly doubles the element area to capture any contaminant particles so only the cleanest air makes it into your intake. The cone shaped filter is capped on both ends with a show quality chrome housing securing the filter and a rubber coupler and heavy-duty clamp are supplied to seal over the flange of the throttle body creating a tight seal and secure mount. The cotton-based filter material is pre-oiled and ready to mount and can be washed and reused for many miles and years to come.
Not Yet Reviewed
$48.00
—
$55.00
Keep your fuel clean by installing one of these FiTech inline fuel filters. They're made from billet aluminum and then black anodized for maximum protection. The filters are available in either a stainless steel mesh cartridge, or sintered bronze and are offered in different micron ratings to fit your fuel system needs.
( 11 )
$51.00
FiTech offers a variety of automatic transmission controller components—including replacement cables to connect to a hand-held unit. When you encounter a faulty original part, there's no need to scrap the entire controller system. Just order the individual replacement model needed from FiTech.
( 7 )
$43.00
FiTech regulator plug fittings feature aluminum construction and a red anodized finish. These block-off plugs are offered individually but are also part of FiTech's HyFuel in-tank retrofit fuel pump kits that include a built-in fuel pressure regulator. The red regulator plugs are used when it's necessary to remove the regulator from the in-tank HyFuel unit.
Not Yet Reviewed
$22.00
FiTech Go-Spark ignition coils will help complete your LS EFI swap or even update your modern muscle car with a fresh jolt of energy. These coils were developed to deliver optimum output with a quality fit and reliability. They bolt in place of the originals—and accept the sealed, locking connector and plug wire terminal for a simple upgrade. If you're looking for a little more dazzle under your hood, choose a model with a built-in LED that flashes when the coil is firing. All coils are sold individually or in a set.
( 1 )
$49.00
Looking for a safe, simple way to mount your FiTech color touch screen tuner? FiTech's Premium magnetic handheld mounts provide an easy and effective way to secure the touch screen controller. They allow you to mount the touch screen nearly anywhere in your car with a sturdy, adjustable stand equipped with two extremely strong magnets to firmly secure the handheld through vibrations, shocks, bumps, and even during spirited track laps! FiTech Premium magnetic handheld mounts are supplied with the injection molded stand, a mounting disc to apply to the dash or console, and a mounting plate designed specifically for the FiTech color touch screen handheld monitor. You can position the tuner where you can easily view the engine parameters and tuning of your FiTech EFI system.
( 3 )
$51.00
One of the most important aspects of a reliable fuel injection system is clean fuel. To help ensure that nothing but debris-free fuel reaches the injectors, service your FiTech Go Fuel filters with genuine FiTech replacement elements. Available in 10- and 100-micron units, FiTech Go Fuel inline fuel filter elements are just like the originals in fit and performance. Choose the correct one for your inline filter.
Not Yet Reviewed
$45.00
FiTech throttle body hardware kits contain a variety of zinc plated steel fasteners and stainless steel nuts. These studs help you secure your throttle body, air cleaner, and more. Order the kit best suited for your application.
( 3 )
$22.00
You are proud to say FiTech electronic fuel injection technology powers your vehicle. Display your pride with a FiTech banner. They are made with durable materials, feature the FiTech Fuel Injection red and white logo, and are equipped with grommets on each corner for easy hanging in your garage, shop, trailer.
Not Yet Reviewed
$29.00
FiTech Can-Bus breakout harnesses connect FiTech fuel injection systems or transmission controllers with AutoMeter ICAN gauges, tachometers and speedometers. Order the harness needed for your application.
Not Yet Reviewed
$27.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
