Availability
When it comes to converting to EFI, it's important for the fuel pump to be installed in a cool area and what better place than in the gas tank itself. The pump is cooled by the fuel, it's quieter plus there's no chance of fuel starvation. To help ease the installation of an in-tank pump, we offer a new Go Fuel In-Tank Module assembly. This universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The cut-to-fit bracket secures a 340 LPH pump capable of providing fuel to 600 horsepower engines. To ensure clean fuel is pulled into the pump, two size of sock/filters are provided, a standard 11 square-inch design as well as a large, 35 square-inch version. Go Fuel in-tank modules are a direct fit into fuel tanks offered by TANKS Inc.
( 25 )
$150.00
—
$266.00
FiTech throttle bodies provide high-flow for your LS engine. They are built with cast aluminum construction and include the IAC motor. They are offered in two low-profiles with diameters of 92mm and 102mm available.
( 50 )
$192.00
When you press the accelerator to the floor, does your ride cough, sputter, and basically plead for more juice? FiTech EFI frame mount fuel pumps flow up to 255 lph (67 gph) to keep you and your vehicle in sync. These pumps are the perfect addition to your modified beast, and can fuel engines up to 600 hp. Get the right amount of fuel to the motor with a FiTech EFI frame mount fuel pump!
( 31 )
$109.00
FiTech offers a variety of accessories and components for Go EFI Systems including oxygen sensors. These sensors are for replacing or upgrading existing parts and help to keep your vehicle running at top performance with long-term durability and reliability. Maintain fuel efficiency and emissions standards with the FiTech oxygen sensor best suited for your application.
( 5 )
$111.00
FiTech replacement handheld controllers will get you back up and running quick when the worst happens. If you lose or break your controller you can be out of luck updating your tuning or diagnosing an issue with the fuel injection system, but FiTech has you covered with their replacement controllers. All controllers come with the correct firmwear for your fuel injection system.
( 18 )
$167.00
Racing takes its toll on vehicles much faster than regular driving. Engines, tires, and fuel systems all have short life expectancies when attached to high performance vehicles. FiTech replacement in-tank fuel pumps free-flow 340 lph (89 gph) and get your Go EFI Fuel Command Center sump kits back on track.
( 1 )
$150.00
—
$179.00
FiTech Go Fuel regulators allow you to set the fuel pressure precisely where your EFI system and engine require. The regulators are able to handle high-flow fuel pumps, can be adjusted from 30 to 70 psi, and can support up to 1,000 hp on gas engines. Crafted from billet aluminum, FiTech regulators feature -6 ORB ports, a vacuum/boost port, and they will accept a pressure gauge. They are offering two models, a compact unit with a single outlet and a larger, dual outlet version.
( 2 )
$127.00
—
$171.00
Whether you want to add an automatic transmission to your vehicle with a FiTech fuel injection system or need to replace a damaged harness, FiTech transmission control harnesses get the job done. Repair or customize your vehicle's sensor layout the proper way with the FiTech transmission control harness designed for your application.
( 1 )
$153.00
FiTech Go-Spark CD ignitions enhance the performance of fuel injected or carbureted engines. The high-output multi-spark technology ensures complete combustion and improves drivability by delivering full energy sparks from idle through high-rpm. Optimize your EFI or carb ignition setup with FiTech Go-Spark CD ignitions. Features and specs: * One sealed connector for a clean installation * Multi-spark to 2,500 rpm * Maximum 10,000 rpm
( 3 )
$222.00
On Sale
FiTech offers a line of stylish valve covers for LS-based engines. They provide a sleek, polished look that complements any engine bay, making them the perfect choice for those looking to enhance the visual appeal of their vehicle. The aluminum covers are crafted to deliver a custom look without compromising on compatibility. Select the size, style, and finish you prefer. Sold in pairs.
Not Yet Reviewed
$175.00
—
$292.00
$157.50
—
$262.80
FiTech offers automotive air cleaners in a variety of styles and sizes for fitment on many vehicles. These filters prevent dirt, dust, sand, and other contaminants from damaging your engine. They are equipped with high-quality element material, such as cotton gauze, and contribute to your vehicle's performance. The air cleaner assemblies are available for single 2-, 3-, and 4-barrel fitment. Select the style and size preferred for your application.
( 6 )
$114.99
Maximize your engine's potential with the FiTech Go-Spark ignition box and coil kits! You've got the fuel, now upgrade the spark with the FiTech Go-Spark Capacitive Discharge Ignition! The Go-Spark CDI produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. The Go-Spark CDI was designed for 4, 6, and 8-cylinder engines equipped with a distributor. It accepts the trigger signal from an HEI, amplifier, points or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tach. Plus, high-energy coil enhances CDI performance. Go-Spark CDI features: * Produces series of sparks below 2,500 rpm * Boosts starting power, idle quality, and throttle response * High energy coil enhances CDI performance * Delivers full energy sparks through racing rpm * Ensures complete combustion of fuel mixture * Accepts Trigger Signal from variety of distributors (distributor not included) * Usable with separate 12-volt Square Wave Tach Output
Not Yet Reviewed
$269.99
FiTech Go EFI Tri-Power linkage kits are designed for exclusive use with their Go EFI Tri-Power 600 hp system. They provide an effective linkage solution for the unique challenges of using this retro-style setup. Complete your awe-inspiring six-pack build with a FiTech Go EFI Tri-Power linkage kit.
Not Yet Reviewed
$116.00
Enjoy better reliability and performance with FiTech Go-Spark ceramic spark plug wire sets. Each spark plug is preassembled from ceramic and carefully crafted with the proper end angles in mind, sparing you the hassle of custom trimming. Select the spark plug wire set designed for your application needs.
( 1 )
$120.00
—
$135.00
FiTech offers replacement fuel rails for a variety of applications, including EFI and LS fuel injection systems. Order the FiTech fuel rails that are best suited for your setup.
Not Yet Reviewed
$114.00
FiTech Go-Spark distributors feature 2-wire magnetic pickups, compact bowl and cap designs to fit into locations where a larger or bulkier distributors will not, and adjustable advance systems, vacuum and/or mechanical, that allow you to dial in a timing curve for any high performance need or for more economy when cruising at light loads on the street or highway. CNC-machined housings, centerless ground shafts, Oil-Lite bushings, hardened drive gears, and FiTech's 3-year limited warranty make Go-Spark distributors very popular. Choose one for your vehicle. Features: * CNC machined 6061 T-6 aluminum housing * Centerless ground shaft that rides on an upper sealed roller or ball bearing * Extended length lower bronze Oil-Lite bushing for smooth operation at high rpms * Melonized or hardened iron drive gear ensures long service life * High-output magnetic pickups and paddle wheel reluctors ensure strong, stable trigger signals—even at higher rpms * Cap and rotor are 30 percent glass filled polyester (PBT) that offers high-impact and dielectric strength, and resistance to carbon tracking * Cap contacts are brass, the rotor spring is stainless steel for long-term maximum conductivity * Dual 2-wire magnetic pickup models available--pickups are placed 180 degrees apart to provide a complete redundant ignition system for racing applications * Height adjustment for deck height differences (not all Go-Spark models)
Not Yet Reviewed
$199.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
