Availability
FAST LSX high-flow billet fuel rails feature a larger internal diameter that is designed to dampen the pulses and provide increased fuel volume, ensuring that your fuel injectors never run dry. They are manufactured from high-strength billet aluminum and are red anodized for maximum durability. These fuel rails include aluminum black anodized -8 AN fittings and "super-seal" O-rings that are component-matched to maximize fuel distribution. Upgrade your fuel system while adding some horsepower with these FAST LSX high-flow billet fuel rails.
( 30 )
$255.95
—
$297.95
FAST Precision-Flow injectors are your best choice for fueling your hot rod, race car, or anything in between. These injectors are precision flowed and sorted to ensure that you get consistent fuel delivery at all pulse widths and duty cycles. FAST Precision-Flow injectors are dynamically, multi point tested, and sorted in sealed sets of 8 with a tolerance of +/- 2 percent at all points. This flowing and sorting process gives you consistent cylinder to cylinder fuel delivery for even Air/Fuel ratios across all cylinders and accurate fueling. Your engine gets the amount of fuel it needs to each cylinder for smooth, reliable performance. Full injector characterization data is available for each part number. Features: * Dynamically flowed at multiple pulse widths, then sorted and sealed in sets with +/- 2 percent maximum variance * Include large LS style lower O-ring but can be used in applications with a 0.550 in. injector bore by swapping lower O-ring * Available in flow rates from 30 lbs./hr. to 245 lbs./hr. (rated at 58 psi) * Available as singles or sets of 8 * High impedance * Compatible with ethanol and oxygenated fuels * Part number and flow rate etched into each injector for easy identification * Complete plug-and-play characterization data available for most OEM and aftermarket engine control systems
( 44 )
$322.95
—
$418.95
FAST Big Mouth LT throttle bodies are cost-effective and stylish. If you don't want to go billet or can't afford it, these throttle bodies are the perfect choice for a variety of applications. An enlarged bore allows for increased airflow to support your higher horsepower, a progressive throttle pulley enhances drivability--especially at low throttle--and a double return spring provides a solid feel and increased safety. Here's an excellent alternative with all of the same features as their billet bodies--FAST Big Mouth LT throttle bodies with black wrinkle powdercoating.
( 9 )
$332.95
—
$346.95
FAST LSXR OEM fuel rail kits will help maintain optimum fuel flow to your EFI system. They are designed for use with the FAST 102mm intake manifolds and include all fittings and attachments for a direct bolt-on fit.
( 6 )
$369.95
—
$376.95
FAST XR Series coils offer 15 to 20 percent more spark energy than stock coils. They are constructed from premium, ultra-pure copper alloy windings, resulting in firing performance approaching up to 50,000 peak volts. Tested to 8,000+ rpm and almost 1,500 hp, these ignition coils have been proven to perform in some of the harshest street and race engine environments. Designed for all popular engine sizes, the FAST XR Series coils are ideal for any street or racing application where reliable, powerful ignition output is needed.
( 8 )
$318.95
—
$454.95
If you own a state-of-the-art EFI system from FAST, and now want to fine-tune the engine parameters for the best possible performance, here's what you need! The FAST EZ-EFI hand-held programmers are designed specifically for the FAST EZ-EFI systems, making this a plug-and-play unit. You can adjust all the fuel management parameters on-the-fly via the convenient controls and easy-to-use screen.
( 1 )
$347.95
These FAST dual-sync billet distributors are an easy, drop-in, plug-and-play solution for fully sequential high performance V8 electronic fuel injection engine applications. They feature reluctors and pickups that have been properly aligned right out of the box, so you don't have to set crankshaft reference angles or phasing in the rotor prior to installation. The FAST dual-sync billet distributors have housings that are CNC-machined from high-quality 6061-T6 billet aluminum and include adjustable slip collars to ensure perfect cam gear alignment. Using high-output magnetic pickups to generate high-capacity, noise-resistant, discrete switching signals for the FAST XFI ECU, they offer extremely precise ignition timing and long life. Deliver strong, powerful energy to your spark plug wires with one of these FAST dual-sync billet distributors.
( 28 )
$429.95
—
$486.95
Drivers using the first-generation EZ-EFI fuel system from FAST can now upgrade to better technology. These retro-fit color touchscreens first serve as your Setup Wizard, then become an electronic gauge screen. The hand-held device has various advanced features, such as a screen hide/sleep function, an intuitive user interface, expanded diagnostics, and more detailed data screens. New adjustments like cold-start and cranking fuel offsets have been added, while many elements on the dashes are now configurable. There is also no longer a need for the cigarette lighter plug—and only one cable is required for installation. Improve your driving and data performance with FAST EZ-EFI retro-fit color touchscreens.
( 8 )
$415.95
FAST XDi EZ-RUN distributors are convenient packages that save time and space. These units do not require an ignition box to fire the coil, and their standard-size caps offer more firewall and manifold clearance than HEI-style distributors. XDi EZ-RUN billet distributors feature mechanical and vacuum advance for easy setup and use. They also feature a built-in electronic module that can directly fire an ignition coil, while delivering accurate, dependable, and maintenance-free operation. Ideal for both carbureted and EFI conversion engines, EZ-RUNs are a perfect choice for daily drivers, musclecars, and street rods. FAST XDi EZ-RUN distributors are available for most domestic V8 applications. Choose the model designed for your year/make and engine application.
( 2 )
$297.95
—
$382.95
Designed for engines with up to 14.5:1 compression ratios, nitrous, superchargers, or turbos, FAST's HI-6R ignitions keep your ride performing all the way down the track. These fully digital, multi-spark, CD ignitions deliver higher spark-gap current than comparable digital CD ignitions. Designed for street and racing use, they come with FAST's "Plug-n-Go" universal harness to cover most installations, with optional harnesses available separately. Their built-in rev limiter automatically drops cylinders in firing order to prevent fuel loading, and is adjustable by increments of 100 from 600-9,900 rpm, without the need for chips. Other built-in features include a tach accuracy check, a system problems check for easy problem diagnosis, and crossfire protection for supercharged and turbo applications. The optional 0-20 degree adjustable timing retard and MAP sensor make a great combination for nitrous and turbo applications. They feature fully potted construction with soft urethane for heat, dirt, and moisture protection, and an anodized heat-sink shell for reliability. FAST designed them to be points, mag, or module-triggered for 4, 6, and 8-cylinder engines with distributors.
( 3 )
$320.95
FAST LSXR upper intake shells are constructed from advanced polymer material that offers a host of benefits over aluminum aftermarket intakes—including lighter weight, increased strength, and improved heat-dissipating characteristics. These replacement shells are compatible with FAST LSXR 102mm, LS, L99, L92, and L76 intake manifolds found on hundreds of vehicles. Order the model recommended for your application.
Not Yet Reviewed
$497.95
FAST 5-wire wideband oxygen sensors are designed for wideband, closed-loop applications. They can read air/fuel ratios from 10:1 to 16:1.
( 10 )
$320.95
FAST LSXR intake manifold runners will restore proper airflow to your intake for the performance you crave. These replacements are available in three sizes: Standard Street, High HP, or Race versions. The manifolds are designed to give you the ability to remove individual runners from the manifold for modification. FAST LSXR runners are yet another reason the LSXR intake is the only choice for your GM LS3/L99/L76 engines. Order the model recommended for your year/make and engine application.
( 2 )
$452.95
These FAST perimeter plates employ multiple injection points to ensure that a perfectly atomized, cylinder-to-cylinder balanced blend of fuel and nitrous reaches your engine. The technology eliminates nitrous delivery imbalance, the major drawback with spray-bar type nitrous systems. The plates are manufactured from aluminum and are anodized for protection.
Not Yet Reviewed
$263.95
—
$467.95
FAST XDi Sportsman distributors are designed to deliver the most accurate trigger signal possible throughout the entire rpm range of your race engine. This is accomplished through the use of an advanced Hall-effect style pickup, which is then converted to a signal that most CD ignition controls accept. The benefit of a Hall-effect pickup is: there is no retard, commonly called magnetic pickup compensation—so you can ensure your timing remains stable from idle to race rpm. Inside the CNC-machined billet housing is a polished stainless steel shaft that is supported with sealed ball bearing on the top and a long bushing on the bottom. They've also reduced end play in the distributor to take out any timing variations and damage to the gear. FAST XDi distributors are supplied with high-quality rotors and caps, and are available with a large diameter Ford-style cap or smaller diameter GM points size cap with HEI terminals, as well as either a steel or bronze gear. Order the Sportsman tailored for your year/make and engine application.
( 1 )
$393.95
—
$454.95
FAST XFI main wiring harnesses will allow you to connect the XFI ECU to the main engine wiring harness of your vehicle. They feature pre-terminated ends with special Weatherpack connectors for a perfect fit. Available for different engine configurations and styles, the FAST XFI main wiring harnesses will make the installation of your XFI ECU a lot easier.
( 2 )
$407.95
—
$465.95
FAST intake manifold spacers allow you to use standard-style intakes with Edelbrock Tall Deck race blocks. These spacers are CAD-designed by the engineers at FAST and CNC-machined to strict tolerances to fit your tall decks. FAST intake manifold spacers feature a lightweight, scalloped design that provides rigidity and function without adding significant weight. Installation hardware and a spacer-to-head gasket are included.
Not Yet Reviewed
$335.95
—
$342.95
Keep your sensors and ECU properly connected, with FAST EZ-EFI 2.0 replacement main wiring harnesses. They feature all of the correct, pre-terminated wiring connections for a direct plug-n-play with your FAST EZ-EFI 2.0.
( 1 )
$452.95
The engineers at FAST teamed up with the airflow specialists at RHS to develop a 3-piece, polymer intake manifold. They are constructed from a proprietary advanced polymer material that offers a host of benefits over aluminum aftermarket intakes, including lighter weight and improved strength and heat dissipating characteristics. While they feature a 102mm air inlet that is perfectly suited to the FAST Big Mouth 102mm throttle body, they can also be used with stock or aftermarket 90mm or 92mm throttle bodies. Other features include integrated nitrous bungs and perfect bolt-on fitment that allows for the use of factory accessories without modifications or clearance concerns. FAST LSXR intake manifolds' 3-piece modular design allows for easy disassembly and porting. This new design gives you the ability to remove individual runners from the manifold for modification.
( 26 )
$450.95
FAST offers optional sending units for use with your XFI, XFI 2.0 or XFI Sporstman fuel injection system. Choose from fuel and oil pressure units or single-pressure units with harnesses available to work with different pounds per square inch of pressure. Add options to your XFI engine management system with FAST sending units.
( 3 )
$410.95
These FAST in-tank electric EFI fuel pumps allow you to upgrade your in-tank fuel pump to some serious fuel flow. They include both -6 AN and barbed hose fittings, terminals, wiring, hoses and clamps. They flow more lph to help your fuel system provide more fuel for the system.
( 3 )
$363.95
Recently, engineers at FAST turned to the OEMs to see what they trust in the way of rpm-measuring crank triggers for their 400 and 500 horsepower daily drivers. Until now, flying magnetic trigger wheels with bulky inductive pickups have been used with the risk of broken magnets or losing magnets at high engine rpm. Now there is a better answer--FAST magnet-free crank trigger kits. A magnet-free device, these kits from FAST include a wheel constructed from ASTM A36 grade steel that is so strong that it only needs to be .125 in. thick and is virtually indestructible. With the wheel being this thin, it not only weighs less but requires less space than competitors' aluminum versions. And the FAST inductive sensor is also much smaller than others on the market and is hermetically sealed with the connector molded into the body. The key to the crank trigger's dependability and accuracy lies in the trigger wheel design. Rather than having added magnets, the wheel has tabs on the outer rim. These tabs are measured by the inductive sensor as the wheel revolves, which then provides data to the fuel injection and ignition systems for accurate rpm measurement. And because the tabs are a part of the single wheel unit, there is no possibility of loss or fragmentation as with the magnetic style trigger wheels. This sensor is used by OEMs both on and inside the engine and provides long-lasting, accurate timing. Installation is straight forward, and everything required is included. For those already using the FAST XFI system, it's a plug and play unit. In addition, it's compatible with many other EFI systems on the market.
( 2 )
$303.95
FAST offers XIM Ignition Module wiring harnesses for a variety of applications, including many Chevy small block Gen III/IV (LS-based) engines from 1997 and up. The XIM Ignition Controller allows you to easily control all aspects of the ignition system when used with a FAST EZ-EFI 2.0, XFI 2.0, or XFI Sportsman. A number of different wiring kits are available for late model GM LS platforms, 5.7 and 6.1 Chrysler Hemis, and Ford's mod motor or the Coyote series. This versatile ignition controller is also capable of giving you coil-per-cylinder operation on any engine using a standard crank trigger and a simple pulse per revolution cam sensor. Connect your XIM ignition controller with one of these wiring harnesses from FAST!
Not Yet Reviewed
$334.95
Perfect your driving style with these FAST XFI 3-Axis accelerometer modules. These modules give you the ability to read and record positive, negative, and lateral g-forces in real time. This information can be very useful when setting up your suspension or perfecting your launches or cornering at the track. Get the most out of your street rod, hot rod, or track car with these FAST XFI 3-Axis accelerometer modules.
Not Yet Reviewed
$274.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
