PONTIAC EXECUTIVE Enginetech

Enginetech Engine Valve Stem Oil Seals

Enginetech provides a comprehensive line of high-quality engine valve stem oil seals designed for durability, featuring materials like Viton®, silicone, and polyacrylate to prevent oil seepage past valve guides. Enginetech offers Premium Positive, Premium Umbrella, and OE-type valve stem seals to fit various American and import, passenger, and heavy-duty applications. Family owned and operated since 1982, Enginetech is the engine builder's source for high-quality engine parts. Enginetech offers a complete line of products for virtually every engine, including import and domestic engines.

2.0 out of 5 stars ( 1 )

$23.99

—

$26.99

Enginetech Rebuilders Valves

For about the same cost of reclaiming valves, you can install brand new Enginetech Rebuilders valves. The purpose of these patented Enginetech Rebuilders valves is to help simplify engine rebuilding by salvaging worn cylinder heads and reducing the need for expensive parts like valve seats and springs. Designed with oversized heads and stems, and a lowered keeper groove, these specialized valves create a more efficient and cost-effective rebuild process. The Enginetech one-piece intake valves are made from HNV-3 high alloy valve steel (often used for exhaust valves). All of the valve stems are either triple chrome plated or gas nitrided. Enginetech even goes a step further and hardens every valve tip to 50HRC minimum. The Enginetech exhaust valves are also a one-piece design. All Rebuilder's exhaust valves are made from EV-8 or EV-12 stainless steel. Again, like their intake valves, all stems are triple chrome plated or gas nitrided. Wafer tips, hardened to 50RHc, are inertia welded to every tip. Select the valves you need for your engine rebuild.

5.0 out of 5 stars ( 2 )

$8.99

—

$12.99

Enginetech Push Rods

Enginetech push rods deliver the strength and precision your valvetrain demands for reliable performance and dependable operation. Built for proper fit and consistent valve motion, these push rods are a solid choice for mild performance rebuilds and OE-style engine applications where durability matters. Order the Enginetech push rods designed to fit your application to help keep your valvetrain in line and your build ready to run.

Not Yet Reviewed

$20.99

Enginetech Piston Sets

Enginetech specializes in providing high performance engine pistons for engine rebuilding in domestic, import, and high performance applications. Enginetech piston sets have superior size and weight grading within each set, and most are decked 0.010 in. to 0.020 in. to compensate for oversized bores and head/deck milling. Pistons are manufactured with state of the art materials to match OE requirements for cast aluminum, hypereutectic, and forged applications. Treatments such as skirt coatings, anodized heads, and Ni-resist inserts are used as required. Select the Enginetech piston set needed for your build.

5.0 out of 5 stars ( 2 )

$420.99

Enginetech Rod Bearings

Enginetech rod bearings are made of high-quality alloys, based on the application requirement. They are made on state of the art equipment, ensuring consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, ensuring they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech rod bearings provide extra protection and better durability within your rebuild. Select the size needed.

Not Yet Reviewed

$63.99

—

$125.99

Enginetech Hydraulic Lifters and Lash Adjusters

Lifters play a vital role in keeping your rebuilt engine running properly. Enginetech hydraulic lifters and lash adjusters are made to OEM quality and specifications, and designed with the needs of the engine builder in mind. They go through a strict QC process to provide you peace of mind during your rebuild. Enginetech lifters are hermetically sealed to prevent contamination, are presoaked to save you prep time, and conveniently packaged in different quantities for easy ordering. Choose what you need today.

Not Yet Reviewed

$36.99

Enginetech Cam Bearings

Enginetech offers cam bearings for a variety of applications, including many Chevy small block V8 engines from the 1960s, '70s, '80s, and '90s. Enginetech camshaft bearings are manufactured as a "full round" design. They're produced from extruded steel tubes with a centrifugally cast Babbitt lining. Several different grades of Babbitt are used depending on the application. Engines with inherent OE problems of bearing wiping and/or fatiguing utilize a high-grade ASTM-14 material. Order the replacement set recommended for your engine.

5.0 out of 5 stars ( 1 )

$16.99

Enginetech Valve Seats

Enginetech valve seats are precision-machined, hardened metal rings pressed or cast into a cylinder head to form the critical sealing surface for an engine's intake and exhaust valves. They maintain the airtightness of the combustion chamber and help transfer heat away from the hot valves. These valve seats are available in a variety of diameters, quantities, and finishes such as chrome nickel, powdered metal, and nickel-cobalt. Additional details: * Crafted from highly durable materials to withstand the extreme temperatures and repetitive impacts of high-stress environments * Heat dissipation: They play a major role in engine cooling by drawing up to 75 percent of the heat from the exhaust valves and conducting it safely into the cylinder head * Precision fitment: Enginetech designs their seats to exact factory specifications or oversized dimensions, making them highly popular for engine rebuilding, vehicle restoration, and performance applications

Not Yet Reviewed

$14.99

—

$90.99

Enginetech Spiral ID Valve Guides

Enginetech Spiral ID valve guides are premium cast iron or bronze aftermarket guides featuring an internal spiral groove (rifling) designed to enhance lubrication by holding oil, which helps reduce friction and prevent valve seizure. These Spiral ID valve guides are designed to meet or exceed OE specifications for durability, featuring precise, U.S.-machined finishes. Family owned and operated since 1982, Enginetech is the engine builder's source for high-quality engine parts. Enginetech offers a complete line of products for virtually every engine, including import and domestic engines.

Not Yet Reviewed

$10.99

Enginetech Main Bearings

Enginetech main bearings are made of high-quality alloys, based on the application requirement. Manufactured on state-of-the-art equipment, this ensures consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, guaranteeing they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. Thrust washers are included, where appropriate, when they are not already molded into the main bearing. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech main bearings provide extra protection and better durability within your rebuild. Select the size needed.

Not Yet Reviewed

$81.99

—

$211.99

Enginetech Plain ID Valve Guides

Enginetech's Plain ID valve guides are premium-grade, cast iron replacement guides designed for high durability and OEM-quality performance. They are manufactured to exact specifications for reliable valve support. As "Plain ID" valve guides, they feature a smooth inner diameter, offering a durable and cost-effective alternative to spiral-reamed or bronze options, typically requiring final sizing and honing after installation. Family owned and operated since 1982, Enginetech is the engine builder's source for high-quality engine parts. Enginetech offers a complete line of products for virtually every engine, including import and domestic engines.

Not Yet Reviewed

$8.99

Enginetech Oil Pumps

The oil pump is a critical component of the internal combustion engine. Enginetech oil pumps are designed to meet or exceed OEM performance with the correct flow and maximum pressure control for each application. Each one is 100 percent cycle tested for both volume and pressure, as well as providing the quality and reliability that precision engine builders require. Enginetech offers pumps for popular and many hard-to-find applications, meeting the rebuilder's requirements for quality and performance. In addition to standard volume pumps, they also offer high-volume/high-pressure versions. Select the oil pump designed for your vehicle.

Not Yet Reviewed

$106.99

Enginetech Timing Chain and Gear Sets

Enginetech timing chain and gear sets are engineered for dependable performance and lasting durability, delivering precise valve timing and smooth engine operation across a wide range of applications. Manufactured to meet or exceed OEM specifications, these components feature high-quality materials, advanced heat treatment, and exacting tolerances to resist wear, reduce noise, and maintain optimal synchronization under demanding conditions. Whether for daily drivers or high mileage rebuilds, these Enginetech timing solutions provide a reliable fit, consistent performance, and the confidence professionals and enthusiasts expect. Select the Enginetech timing chain and gear set designed for your application needs.

Not Yet Reviewed

$56.99

Enginetech Engine Expansion Plug Kits

Enginetech offers engine expansion plug kits for a variety of car, truck, SUV, high performance, and marine applications. Machined from brass or steel, the kits include a variety of sizes to seal whatever ports need to be closed off. The plugs are produced in accordance with factory specs to ensure proper fit and performance. They meet or exceed OE quality standards. Order the kit recommended for your engine. Expansion plugs (or freeze plugs) serve two primary purposes: to block coolant leaks from internal passages, and to protect the engine block from cracking if the coolant inside freezes and expands. The plugs are designed to "pop out" under the pressure of expanding ice, preventing more severe damage, like a cracked block.

5.0 out of 5 stars ( 1 )

$13.99

—

$35.99

Enginetech Stock Replacement Camshafts

Enginetech stock replacement camshafts are direct-fit OE specification cams designed to restore original factory performance, idle quality, and drivability during engine rebuilds. They're available in hydraulic flat tappet, hydraulic roller, and solid flat tappet styles. Order the duration specs and other options preferred for your application. Key features and manufacturing: * OE specifications: Profiled to match original factory lift, duration, and lobe separation angles (LSA) so fuel economy and torque curves remain unchanged * Quality control: Manufactured at OE facilities using strict Statistical Process Control (SPC) data and rigorous metallurgy checks, including Rockwell hardness testing * Application range: Available for a vast array of domestic and import engines, ranging from classic inline-six and pushrod V8 blocks to modern truck applications (such as GM LS/LQ series) * Installation requirements: Designed for standard rebuilds; proper break-in procedures utilizing assembly lube and zinc/ZDDP additives are heavily emphasized by Enginetech to prevent premature wear

Not Yet Reviewed

$128.99

—

$158.99

PONTIAC EXECUTIVE Enginetech Parts and Accessories