MITSUBISHI MONTERO SPORT Enginetech

Enginetech Engine Crankshaft Thrust Washers

Enginetech offers engine crankshaft thrust washers for a wide range of applications. These precision-engineered, wearable components are designed to control crankshaft end-float (axial forward/backward movement) in engines. They protect expensive crankshafts and engine blocks from damage by providing a dedicated wear surface, meeting or exceeding OE specifications. Order the washers recommended for your vehicle. Key features and functions: * Prevent damage: These washers take the wear, preventing the crankshaft counterweights from striking the cylinder block, which can cause catastrophic engine failure * Control end-float: They manage the forward/backward movement caused by clutch operation in manual vehicles or torque converter loads in automatics * Maintain alignment: They ensure the crankshaft remains in the correct position for proper connecting rod alignment, preventing binding, jamming, or uneven piston wear * Material quality: Often manufactured from durable, high-quality bronze or bimetallic materials that can handle high-load, high-friction scenarios * Using Enginetech thrust washers ensures precise clearances, which is crucial for oil pressure retention and preventing crankshaft "walking"

Not Yet Reviewed

$13.99

—

$16.99

Enginetech Main Bearings

Enginetech main bearings are made of high-quality alloys, based on the application requirement. Manufactured on state-of-the-art equipment, this ensures consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, guaranteeing they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. Thrust washers are included, where appropriate, when they are not already molded into the main bearing. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech main bearings provide extra protection and better durability within your rebuild. Select the size needed.

Not Yet Reviewed

$30.99

—

$66.99

Enginetech Piston Ring Sets

Enginetech piston ring sets are produced with only the best materials and quality assurance testing is conducted to ensure quality for customers. They offer a variety of ring sets to choose from. Select a set preferred for your application. Additional features: * Barrel face, taper face, positive twist, reverse twist, and Napier face designs, among others are used where required * Numerous ring face coatings are available depending on the application, and include plasma moly, chrome, and stainless steel * Compression rings are made from the highest quality gray iron, ductile iron, and high strength steel * Oil ring expanders are designed for ease of installation to prevent overlap during assembly

Not Yet Reviewed

$42.99

—

$62.99

Enginetech Rod Bearings

Enginetech rod bearings are made of high-quality alloys, based on the application requirement. They are made on state of the art equipment, ensuring consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, ensuring they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech rod bearings provide extra protection and better durability within your rebuild. Select the size needed.

Not Yet Reviewed

$25.99

—

$55.99

Enginetech Rebuilders Valves

For about the same cost of reclaiming valves, you can install brand new Enginetech Rebuilders valves. The purpose of these patented Enginetech Rebuilders valves is to help simplify engine rebuilding by salvaging worn cylinder heads and reducing the need for expensive parts like valve seats and springs. Designed with oversized heads and stems, and a lowered keeper groove, these specialized valves create a more efficient and cost-effective rebuild process. The Enginetech one-piece intake valves are made from HNV-3 high alloy valve steel (often used for exhaust valves). All of the valve stems are either triple chrome plated or gas nitrided. Enginetech even goes a step further and hardens every valve tip to 50HRC minimum. The Enginetech exhaust valves are also a one-piece design. All Rebuilder's exhaust valves are made from EV-8 or EV-12 stainless steel. Again, like their intake valves, all stems are triple chrome plated or gas nitrided. Wafer tips, hardened to 50RHc, are inertia welded to every tip. Select the valves you need for your engine rebuild.

Not Yet Reviewed

$4.99

Enginetech Spiral ID Valve Guides

Enginetech Spiral ID valve guides are premium cast iron or bronze aftermarket guides featuring an internal spiral groove (rifling) designed to enhance lubrication by holding oil, which helps reduce friction and prevent valve seizure. These Spiral ID valve guides are designed to meet or exceed OE specifications for durability, featuring precise, U.S.-machined finishes. Family owned and operated since 1982, Enginetech is the engine builder's source for high-quality engine parts. Enginetech offers a complete line of products for virtually every engine, including import and domestic engines.

Not Yet Reviewed

$14.99

—

$15.99

Enginetech Engine Expansion Plug Kits

Enginetech offers engine expansion plug kits for a variety of car, truck, SUV, high performance, and marine applications. Machined from brass or steel, the kits include a variety of sizes to seal whatever ports need to be closed off. The plugs are produced in accordance with factory specs to ensure proper fit and performance. They meet or exceed OE quality standards. Order the kit recommended for your engine. Expansion plugs (or freeze plugs) serve two primary purposes: to block coolant leaks from internal passages, and to protect the engine block from cracking if the coolant inside freezes and expands. The plugs are designed to "pop out" under the pressure of expanding ice, preventing more severe damage, like a cracked block.

Not Yet Reviewed

$6.99

—

$8.99

Enginetech Timing Belt Tensioners

Enginetech offers a wide range of timing components including timing belt tensioners that are designed for specific vehicle and engine applications. The primary purpose of these timing components is to maintain correct tension on the timing belt, which keeps it properly aligned with the engine's gears to ensure the crankshaft and camshafts stay synchronized. This synchronization is critical for the engine's valves to open and close at the right time, ensuring proper engine performance and to help prevent potential damage from a loose or slipping belt. Manufactured to the highest quality OE standards, Enginetech timing belt tensioners offer engine rebuilders a more efficient and cost-effective rebuild process. Order the timing belt tensioner in the application needed.

Not Yet Reviewed

$22.99

—

$23.99

Enginetech Timing Belts

Enginetech timing belts are replacement automotive parts designed to be a direct fit for various import and domestic engines. They're manufactured to meet or exceed original equipment specifications, are made from high-quality materials like rubber, and are intended to provide durable, consistent performance. The belts are available for virtually every auto make from the 1970s and up. * Synchronizes the engine's crankshaft and camshaft to ensure the valves open and close at the correct times, which is crucial for the combustion process * Made of rubber with a construction designed for durability and to prevent stretching, often with reinforcing cords

3.0 out of 5 stars ( 1 )

$23.99

—

$53.99

Enginetech Oil Pumps

The oil pump is a critical component of the internal combustion engine. Enginetech oil pumps are designed to meet or exceed OEM performance with the correct flow and maximum pressure control for each application. Each one is 100 percent cycle tested for both volume and pressure, as well as providing the quality and reliability that precision engine builders require. Enginetech offers pumps for popular and many hard-to-find applications, meeting the rebuilder's requirements for quality and performance. In addition to standard volume pumps, they also offer high-volume/high-pressure versions. Select the oil pump designed for your vehicle.

Not Yet Reviewed

$122.99

—

$127.99

Enginetech Engine Timing Belt Idler Pulleys

Enginetech engine timing belt idler pulleys are critical, high-quality components designed to guide and maintain proper tension on the timing belt, ensuring accurate synchronization between the crankshaft and camshafts. These steel pulleys prevent belt slack, reduce vibration, and are manufactured to OE standards for durability during engine rebuilds. Available individually or in pairs. Order the model recommended for your vehicle. Key details: * Function: They guide the timing belt along its path, taking up slack and preventing the belt from skipping teeth, which can cause severe engine damage * Manufactured from durable steel, ensuring longevity and resistance to heat and wear * Precision-engineered to meet OE standards for fit, function, and reliability * Crucial for maintaining proper engine timing, specifically for vehicles requiring robust, reliable timing components, such as Toyota, Honda, and Lexus * Why replace idler pulleys? Failure to replace idler pulleys can lead to bearing failure, resulting in catastrophic engine failure, similar to a broken timing belt

Not Yet Reviewed

$19.99

Enginetech Piston Sets

Enginetech specializes in providing high performance engine pistons for engine rebuilding in domestic, import, and high performance applications. Enginetech piston sets have superior size and weight grading within each set, and most are decked 0.010 in. to 0.020 in. to compensate for oversized bores and head/deck milling. Pistons are manufactured with state of the art materials to match OE requirements for cast aluminum, hypereutectic, and forged applications. Treatments such as skirt coatings, anodized heads, and Ni-resist inserts are used as required. Select the Enginetech piston set needed for your build.

Not Yet Reviewed

$175.99

Enginetech Rear Main Seals

Enginetech rear main seals are high-quality, aftermarket gaskets designed to prevent oil from leaking at the crankshaft's rear. Available in a variety of materials, such as Viton®, silicone, rubber, PTFE, and polyacrylate, they feature specialized lips that seal worn or uneven surfaces. Rear main seals are offered in one or two-piece designs for a wide range of applications. Key features of Enginetech rear main seals: * Durable materials withstand high temperatures and prevent leakage * Engineered to seal even with imperfections on the crankshaft, including specialized lips * Comprehensive fitment: Enginetech offers solutions for a wide range of engines, including 1-piece, 2-piece, and some with installation sleeves for easier, proper fitting * Designed to meet or exceed OEM standards, ensuring reliable performance for stock applications * Why Enginetech rear main seals are used: -- They stop oil leaks between the engine block and the crankshaft -- High quality and reliability: Rigorously tested for longevity and to ensure they can withstand years of operation -- Repairing worn crankshafts: Their precision-cut lips help seal crankshafts that may have slight wear

Not Yet Reviewed

$14.99

MITSUBISHI MONTERO SPORT Enginetech Parts and Accessories