Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Enginetech Engine Expansion Plug Kits
Enginetech offers engine expansion plug kits for a variety of car, truck, SUV, high performance, and marine applications. Machined from brass or steel, the kits include a variety of sizes to seal whatever ports need to be closed off. The plugs are produced in accordance with factory specs to ensure proper fit and performance. They meet or exceed OE quality standards. Order the kit recommended for your engine. Expansion plugs (or freeze plugs) serve two primary purposes: to block coolant leaks from internal passages, and to protect the engine block from cracking if the coolant inside freezes and expands. The plugs are designed to "pop out" under the pressure of expanding ice, preventing more severe damage, like a cracked block.
( 1 )
$8.99
Enginetech Rebuilders Valves
For about the same cost of reclaiming valves, you can install brand new Enginetech Rebuilders valves. The purpose of these patented Enginetech Rebuilders valves is to help simplify engine rebuilding by salvaging worn cylinder heads and reducing the need for expensive parts like valve seats and springs. Designed with oversized heads and stems, and a lowered keeper groove, these specialized valves create a more efficient and cost-effective rebuild process. The Enginetech one-piece intake valves are made from HNV-3 high alloy valve steel (often used for exhaust valves). All of the valve stems are either triple chrome plated or gas nitrided. Enginetech even goes a step further and hardens every valve tip to 50HRC minimum. The Enginetech exhaust valves are also a one-piece design. All Rebuilder's exhaust valves are made from EV-8 or EV-12 stainless steel. Again, like their intake valves, all stems are triple chrome plated or gas nitrided. Wafer tips, hardened to 50RHc, are inertia welded to every tip. Select the valves you need for your engine rebuild.
( 2 )
$6.99
—
$19.99
Enginetech Main Bearings
Enginetech main bearings are made of high-quality alloys, based on the application requirement. Manufactured on state-of-the-art equipment, this ensures consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, guaranteeing they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. Thrust washers are included, where appropriate, when they are not already molded into the main bearing. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech main bearings provide extra protection and better durability within your rebuild. Select the size needed.
Not Yet Reviewed
$48.99
—
$56.99
Enginetech Head Gasket Sets
Enginetech offers head gasket sets for a variety of applications, including select Chevrolet, Dodge, Jeep, Mitsubishi, Ram, Chrysler, Buick, and Toyota engines from 1988 and up. Depending on the kit you select, the kit may include: head gaskets, intake gaskets, exhaust manifold gaskets, valve cover gaskets, valve stem seals, water neck gasket, valley pan, fuel pump gasket, distributor gasket, fuel injector O-rings, upper intake manifold plenum gasket, and head fasteners. Order the set recommended for your engine.
Not Yet Reviewed
$64.99
—
$106.99
Enginetech Conversion Gasket Sets
Enginetech conversion gasket sets are engineered to provide a reliable, cost-effective solution for complete engine sealing during rebuilds and conversions. Designed with precision-fit components, these sets typically include all the essential gaskets and seals needed to convert a cylinder head set into a full gasket solution—ensuring consistent compatibility and reducing sourcing complexity. Manufactured from high-quality materials for both durability and optimal sealing performance, these gasket sets are built to withstand demanding operating conditions, helping to prevent leaks and maintain engine efficiency. Ideal for professional technicians and DIY rebuilders alike, they deliver dependable performance, simplified installation, and trusted quality you can rely on for a wide range of engine applications. Order the gasket set designed for your application needs.
Not Yet Reviewed
$20.99
—
$23.99
Enginetech Piston Sets
Enginetech specializes in providing high performance engine pistons for engine rebuilding in domestic, import, and high performance applications. Enginetech piston sets have superior size and weight grading within each set, and most are decked 0.010 in. to 0.020 in. to compensate for oversized bores and head/deck milling. Pistons are manufactured with state of the art materials to match OE requirements for cast aluminum, hypereutectic, and forged applications. Treatments such as skirt coatings, anodized heads, and Ni-resist inserts are used as required. Select the Enginetech piston set needed for your build.
( 2 )
$79.99
Enginetech Timing Belt Tensioners
Enginetech offers a wide range of timing components including timing belt tensioners that are designed for specific vehicle and engine applications. The primary purpose of these timing components is to maintain correct tension on the timing belt, which keeps it properly aligned with the engine's gears to ensure the crankshaft and camshafts stay synchronized. This synchronization is critical for the engine's valves to open and close at the right time, ensuring proper engine performance and to help prevent potential damage from a loose or slipping belt. Manufactured to the highest quality OE standards, Enginetech timing belt tensioners offer engine rebuilders a more efficient and cost-effective rebuild process. Order the timing belt tensioner in the application needed.
Not Yet Reviewed
$18.99
Enginetech Rod Bearings
Enginetech rod bearings are made of high-quality alloys, based on the application requirement. They are made on state of the art equipment, ensuring consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, ensuring they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech rod bearings provide extra protection and better durability within your rebuild. Select the size needed.
Not Yet Reviewed
$25.99
—
$29.99
Enginetech Piston Ring Sets
Enginetech piston ring sets are produced with only the best materials and quality assurance testing is conducted to ensure quality for customers. They offer a variety of ring sets to choose from. Select a set preferred for your application. Additional features: * Barrel face, taper face, positive twist, reverse twist, and Napier face designs, among others are used where required * Numerous ring face coatings are available depending on the application, and include plasma moly, chrome, and stainless steel * Compression rings are made from the highest quality gray iron, ductile iron, and high strength steel * Oil ring expanders are designed for ease of installation to prevent overlap during assembly
( 2 )
$39.99
—
$46.99
Enginetech Full Gasket Sets
Enginetech offers full engine gasket sets for a variety of Chevy, Dodge, Jeep, Mitsubishi, Ram, Subaru, Acura©, and Mazda models from 1989 and up. Depending on your vehicles, the kits contain: head gaskets, intake gaskets, exhaust manifold gaskets, oil pan gasket, valve cover gaskets, water pump gaskets, rear main seal, exhaust pipe gasket, valve stem seals, timing cover gaskets, timing cover seal, water neck gasket, valley pan, fuel pump gasket, distributor gasket, fuel injector O-rings, and upper intake manifold plenum gasket. Order the set recommended for your application.
( 2 )
$82.99
Enginetech Cylinder Head Fasteners
Enginetech cylinder head fasteners are engineered for reliable, high-performance sealing in today's demanding engine applications, delivering consistent clamping force and long-term durability you can trust. These engine cylinder head bolt sets are manufactured to meet or exceed OE specifications, and are precision-threaded and rigorously tested to ensure proper torque retention, reduced risk of head gasket failure, and dependable performance under extreme heat and pressure. They are ideal for professional engine builders and repair technicians, providing an easy, accurate installation experience while helping to extend engine life and maintain optimal combustion integrity across a wide range of both domestic and import vehicles. Order the fasteners for your application.
( 3 )
$50.99
Enginetech Timing Belts
Enginetech timing belts are replacement automotive parts designed to be a direct fit for various import and domestic engines. They're manufactured to meet or exceed original equipment specifications, are made from high-quality materials like rubber, and are intended to provide durable, consistent performance. The belts are available for virtually every auto make from the 1970s and up. * Synchronizes the engine's crankshaft and camshaft to ensure the valves open and close at the correct times, which is crucial for the combustion process * Made of rubber with a construction designed for durability and to prevent stretching, often with reinforcing cords
( 1 )
$8.99
