Availability
On Sale
Edelbrock Performer RPM LS1 intake manifolds are manifold-only packages that allow you the opportunity to use a carburetor on these originally computer-controlled engines. Edelbrock LS1 intake manifolds are manufactured from aluminum and offer you the ability to maximize torque and increase the power curves of your engine. Are you going back to the traditional carburetor? Rely on Edelbrock Performer RPM intake manifolds.
( 12 )
$605.95
$407.95
—
$484.76
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 567 )
$423.95
On Sale
Edelbrock Victor Jr. carbureted intake manifolds are capable of supporting up to 600 hp. They accept a standard 4-barrel square bore carburetor. The manifolds are made of high-quality aluminum and feature a natural finish. The required electronic timing control module is sold separately .
( 9 )
$432.95
—
$476.95
Edelbrock Victor LS throttle bodies are constructed from billet aluminum and come complete with TPS and IAC, maximizing performance upgrades on all Pro-Flo XT, EFI Victor Elbow, and Gen III and Gen IV engines with cable-driven throttle bodies. With bolt patterns for both LS generations, these enlarged single-bore throttle bodies feature a progressive throttle linkage and parabolic bore design for increased power and enhanced low-speed drivability. A thicker throttle blade eliminates deflection for boosted applications, while a beefed-up linkage and dual-spring mechanism ensure safety and total throttle control.
( 1 )
$329.95
Edelbrock Victor Jr. EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds are designed to replace the stock mono blade throttle bodies and give you throttle body options; fuel rail set, fuel injectors, fuel pump, and regulator are all required (each sold separately). If you decide not to maintain your EFI setup, you can also use these Victor Jr. EFI intake manifolds to convert to a carburetor.
( 10 )
$514.95
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$540.95
This Edelbrock Victor Jr. LS1 EFI Intake Manifolds are a high-rise single plane design capable of supporting up to 600 hp. Like the Edelbrock Performer RPM LS1 intakes, these Victor Jr. LS1 EFI manifolds accept a standard flange throttle body. These manifolds also include a throttle bracket designed to work with 700R-4, 200R-4 and Turbo 350 transmissions. Most applications will require hood modification.
( 2 )
$509.95
An upgrade to the Victor series, these Edelbrock Victor Pro Series 2-piece water pumps are designed for high output racing engines, especially dirt late model and circle track applications. They feature a 2-piece cartridge style design for easy maintenance and improved performance. The 2-piece design features improved symmetrical flow paths resulting in increased flow and requiring less horsepower from the engine. A new aggressive impeller with improved inlet and outlet port designs provides maximum cooling with equal distribution making this water pump highly efficient. All of this helps eliminate hot spots in the engine, producing optimum power from every cylinder. Finally, it features a -2 bleeder screw for quick coolant system bleeding.
( 1 )
$551.95
If you want to build a carbureted LS3 engine. Edelbrock's Performer RPM LS3 intake manifolds afford you that opportunity. Originally computer-controlled engines, you can top your LS3 with one of these Performer RPM manifolds and a carburetor to gain maximum power and a broad torque curve. They include provisions for a timing control module, passages for clean-look wiring, and a special throttle/transmission bracket to make these units an easy retro-fit. Go carbureted with Edelbrock Performer RPM LS3 intake manifolds.
( 1 )
$422.95
Designed to be run with your Edelbrock E-Force Competition supercharger, these E-Force air intake systems can add additional horsepower to your vehicle--and who doesn't want more power? E-Force Competition air intake systems feature an open element style cold air system with an integral mass air meter, a cone-style air filter that can be cleaned, oiled, and reused, and a large molded plastic heat shield to block high temperatures and permit a rush of cool air into your supercharger! Kits are available for a variety of applications from 2005 and up.
( 1 )
$509.95
Get maximum cooling for the street or track. Edelbrock Victor Series high-volume water pumps are designed for maximum flow and equal coolant distribution in street cars, race cars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined impellers are larger than other impellers and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leakproof seals, and gaskets. Most Victor Series pumps are available in your choice of satin, black, and polished finishes, or EnduraShine.
( 175 )
$564.95
These 2-piece aluminum timing covers from Edelbrock are made from aluminum for lighter weight and excellent strength. Their attractive and unique design allows quick camshaft removal without dropping the oil pan or breaking the oil pan seal. They include all necessary gaskets, bolts, and seals.
( 36 )
$323.95
—
$362.95
Finish off your engine with these quality Edelbrock Classic cast aluminum valve covers. The covers are made from heavy-gauge, sand cast aluminum with a polished, black, or EnduraShine finish and have a timeless ridged design. No Edelbrock part would be complete without the vintage logo topping it off. It's no wonder that these covers have been popular since the late '50s.
( 49 )
$313.95
Edelbrock E-Force belt tensioner upgrade kits are engineered to handle the increased belt stress encountered in high-horsepower E-Force applications. They're an upgrade for any Edelbrock Supercharger system produced prior to February 2013 and are now included on all systems thereafter.
( 2 )
$375.95
Manufactured by ARP, Edelbrock head bolt kits contain a complete set of the highest quality head bolts and hardened washers available. They are cold-formed to ensure molecular integrity and heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal to facilitate cylinder head re-torquing. Hardened and parallel-ground washers are included, and they're rated at 170,000 psi.
Not Yet Reviewed
$328.95
—
$465.95
CNC-machined from aluminum extrusions, these Edelbrock aluminum fuel rails have a flow-through design and fittings on both ends where applicable. Designed for Edelbrock EFI manifolds, they come with all necessary hardware.
( 61 )
$262.95
Edelbrock Supercharged coil covers dress up your engine. These cover kits are geared towards those with Edelbrock competition versions of the supercharger kits, which do not include coil covers, but would like to add them. The covers are designed to fit around the supercharger units, are available in many styles in black, red, or red and black, and feature a "Supercharged" logo design.
Not Yet Reviewed
$482.95
—
$506.95
Edelbrock Max-Fire Coil On Plug ignition coils are designed with higher resistance for increased energy output at higher rpm, when compared to an OEM coil. They're ideal for use with turbocharged and supercharged applications or engines that have been converted to E85 fuel. The coils are sealed with a high temperature epoxy for shock and vibration resistance—as well as excellent thermal conductivity. The spark plug spring contact is made from stainless steel, with a ferrite lug to reduce EMI/RFI noise; while the boots are molded from a high temperature silicone compound for superior heat resistance up to 550 degrees F. Order the direct bolt-on OEM coil pack recommended for your vehicle.
( 5 )
$293.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
