Availability
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 312 )
$205.95
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design improves flow quantity and quality—and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Performer RPM street fuel pumps produce 6 psi and do not require a regulator; and the clockable lower housing can be rotated for the best inlet and outlet alignment. They're designed for use with gasoline only.
( 420 )
$177.95
—
$220.95
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 565 )
$270.95
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$299.95
Edelbrock Performer-Plus cam and lifter kits are designed for optimum torque from the low-end to the mid-range. They feature smooth idling cams for daily drivers, trucks, vans, RVs, and 4x4s. They offer improved throttle response and torque. Each kit includes a camshaft, hydraulic lifters, assembly lube, and instructions.
( 113 )
$302.95
—
$306.95
Edelbrock Elite II Series valve covers are the next generation of the original Elite Series valve covers. The Elite II Series feature a design that is influenced by the Elite Series originally released in 1985, but with a new modern take on this classic look. The valve covers are made from heavy-gauge, die-cast aluminum and are finished off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Depending on application, Elite II valve covers are available in both stock and tall styles. Tall profile valve covers are 2 in. taller than stock and clear most roller rockers and valve train components, while the stock profile versions clear accessories like air-conditioning and alternator brackets.
( 177 )
$173.95
—
$238.95
Edelbrock Victor Series racing fuel pumps free-flow 130 gph, outpacing conventional racing pumps which flow around 114 gph. These pumps are a necessity for drag racing, Circle Track, street machines, or any application that demands high-output fuel delivery. They have high-volume inlet and outlet orifices and produce 10 psi. Victor pumps are designed for use with gasoline and Edelbrock's fuel pressure regulators. Order the model recommended for your application.
( 29 )
$183.95
—
$195.95
Edelbrock rocker shaft stud kits provide better rocker shaft retention and are highly recommended for use with Edelbrock FE heads. These studs help to eliminate thread wear and the possibility of bottoming the rocker shaft bolts in the head. They are made of steel alloy and fit Edelbrock FE series cylinder heads.
( 9 )
$154.95
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 52 )
$281.95
Performer-Plus lifters from Edelbrock are designed to handle the torque and horsepower that the Performer-Plus camshafts produce. They are also matched perfectly by Edelbrock to provide consistent power.
( 10 )
$134.95
CNC-machined from aluminum extrusions, these Edelbrock aluminum fuel rails have a flow-through design and fittings on both ends where applicable. Designed for Edelbrock EFI manifolds, they come with all necessary hardware.
( 61 )
$137.95
—
$245.95
Edelbrock aluminum timing covers are the perfect way to add strength and durability to the front of your engine, not to mention increased looks. These die-cast covers are available in multiple configurations depending on application.
( 35 )
$117.95
—
$221.95
Edelbrock Performer-Link true roller timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Crank gears are machined from SAE 1144 stress-proof steel. Most Edelbrock Performer-Link true roller timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set cam timing 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. Edelbrock Performer-Link true roller timing chain sets are not for use above 6,500 rpm.
( 171 )
$101.95
—
$130.95
Edelbrock Racing diecast aluminum valve covers are perfect for high performance street or all-out race engines. They are lightweight, high-strength, diecast aluminum and provide ample clearance for all popular valvetrains on most cylinder heads. Some versions are available with logos and multiple finishes.
( 32 )
$188.95
—
$211.95
Edelbrock offers E-Series head bolt kits to install one set of cylinder heads. Each bolt kit includes the necessary bolts and washers for your application. E-Series bolts have a yield tensile strength of 190,000 psi for strong and reliable loading with generous filleting throughout to eliminate stress risers. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. These cylinder head bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock "E" stamped into the hex head. Order the E-Series head bolt kit designed for your application needs.
( 4 )
$104.95
—
$135.95
These Edelbrock head gasket sets include everything you need to install Edelbrock Performer and Performer RPM aluminum heads. These sets include intake, exhaust, head, waterneck, distributor and valve cover gaskets.
( 35 )
$124.95
—
$179.95
These 2-piece aluminum timing covers from Edelbrock are made from aluminum for lighter weight and excellent strength. Their attractive and unique design allows quick camshaft removal without dropping the oil pan or breaking the oil pan seal. They include all necessary gaskets, bolts, and seals.
( 36 )
$165.95
Get maximum cooling for the street or track. Edelbrock Victor Series high-volume water pumps are designed for maximum flow and equal coolant distribution in street cars, race cars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined impellers are larger than other impellers and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leakproof seals, and gaskets. Most Victor Series pumps are available in your choice of satin, black, and polished finishes, or EnduraShine.
( 172 )
$249.95
—
$278.95
Don't cut corners when it's time for valves. Get genuine Edelbrock stainless steel valves. They're made from a tough, stainless steel alloy and are carefully designed to increase gas flow for more power. What's more, they have hardened stem tips for durability and are swirl-polished.
( 24 )
$160.95
—
$307.95
Edelbrock Victor Tunnel Ram fuel rail kits are specifically designed for their Victor Series Tunnel Ram manifolds. They feature a new and improved design with 5.5 sq. in. at the plenum, making them 25 percent larger. They are the ideal fuel rail kits to use with any modern high-horsepower demanding application. Edelbrock Victor Tunnel Ram fuel rail kits are constructed from superior-quality aluminum for long-lasting durability and performance and are anodized black for a beautiful finish.
Not Yet Reviewed
$224.95
These Edelbrock Victor Ram tunnel ram tops are designed to fit the Victor Ram manifold base. They are made of aluminum and come available in natural or polished finishes. Edelbrock Victor Ram tunnel ram tops are available for dual inline standard square-flange carburetors or dual sideways-mounted Dominator carburetors. A gasket is included, making your installation simple.
Not Yet Reviewed
$201.95
Edelbrock cylinder head gaskets provide the best sealing solution for your engine. Edelbrock relies on industry-leading manufacturers to ensure their head gaskets will provide optimum fit and sealing properties when used with Edelbrock cylinder heads. These replacement gaskets are machined from high-density materials to precise specs--for applications from the 1940s and up.
( 56 )
$113.95
—
$281.95
Finish off your engine with these quality Edelbrock Classic cast aluminum valve covers. The covers are made from heavy-gauge, sand cast aluminum with a polished, black, or EnduraShine finish and have a timeless ridged design. No Edelbrock part would be complete without the vintage logo topping it off. It's no wonder that these covers have been popular since the late '50s.
( 49 )
$268.95
—
$306.95
Edelbrock's performance CRC (core-reinforced-composite) valve cover gaskets' multi-layer construction consists of two highly compressible, high-rubber content, fiber-reinforced outside layers chemically bonded to a high-strength composite core. This unique core-reinforced construction provides excellent sealing integrity and conformability for easy installation, as well as radial strength to resist high-vacuum or blowout conditions.
( 221 )
$159.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
