Availability
On Sale
Edelbrock Performer RPM 5.8 EFI upper plenums are powdercoated light titanium gray and the plenum cover is removable to allow easy runner access. These Edelbrock Performer 5.8L plenums are designed for truck engines and feature a modular design that incorporates the latest air-flow technology for maximum torque gains in the mid-range. Will not fit vans.
( 2 )
$583.95
$467.16
On Sale
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 53 )
$497.95
$398.36
On Sale
Edelbrock Victor Jr. EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds are designed to replace the stock mono blade throttle bodies and give you throttle body options; fuel rail set, fuel injectors, fuel pump, and regulator are all required (each sold separately). If you decide not to maintain your EFI setup, you can also use these Victor Jr. EFI intake manifolds to convert to a carburetor.
( 10 )
$605.95
$484.76
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$532.95
—
$575.95
$426.36
—
$460.76
On Sale
These Edelbrock Victor EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator, which are each sold separately.
( 2 )
$509.95
$407.96
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$571.95
—
$617.95
$457.56
—
$494.36
On Sale
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$482.95
$386.36
On Sale
Edelbrock Performer RPM LS1 intake manifolds are manifold-only packages that allow you the opportunity to use a carburetor on these originally computer-controlled engines. Edelbrock LS1 intake manifolds are manufactured from aluminum and offer you the ability to maximize torque and increase the power curves of your engine. Are you going back to the traditional carburetor? Rely on Edelbrock Performer RPM intake manifolds.
( 12 )
$605.95
$484.76
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$571.95
$457.56
On Sale
Make some noise with Edelbrock Rollin' Thunder hydraulic roller camshafts. Designed to improve horsepower and torque, they feature more aggressive profiles than conventional flat-tappet hydraulic cams without excessive valve overlap. Recommended for high performance street and strip use, Edelbrock Rollin' Thunder hydraulic roller camshafts work best from 1,500 to 6,500 rpm and are performance matched to Edelbrock Total Power Package components for proven performance. Features Include: * Performance--roller camshafts generate higher lift velocity and faster valve action for increased horsepower and torque gains * Drivability--produces great sounding idle with excellent vacuum at idle * Durability--the smaller surface contact area of roller tappets and their reduced friction, together with stronger camshaft material (hardened steel or iron) ensures longer camshaft life * Environmental--can use ILSAC GF-4 oil, which lowers emissions and does not require zinc or phosphate oil additives * Economy--reduced contact friction between the lifter and camshaft can increase fuel economy for better mileage
( 28 )
$474.95
$379.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
