Availability
Rebuilding your nostalgic 94 carburetor? Edelbrock 94 rebuild kits contain everything you need to do the job right. Kits include fuel inlet seat and needle, accelerator pump assembly and spring, accelerator check ball, check ball retainer, power valve assembly, float gauge and all the necessary gaskets. These rebuild kits will overhaul any Edelbrock 94 or Holley 94 2-barrel 3-bolt flange carburetor and have your hotrod running in no time. Do your rebuild right with Edelbrock 94 carburetor rebuild kits.
Not Yet Reviewed
$60.95
Edelbrock Performer carburetor maintenance kits consist of genuine Edelbrock parts to help you rebuild or simply keep your carburetor in top notch condition. They include all of the parts and gaskets necessary to rebuild or modify your Performer carburetor for optimum performance. You put a lot of hard work and effort in your project vehicles. Make sure the parts you use are worthy of the effort and order the Edelbrock Performer carburetor maintenance kit designed for your application.
( 289 )
$60.95
Edelbrock fuel pump rebuild kits are among the best-engineered performance products in the world. Their rigorous testing program ensures you of receiving quality components in every kit. All fuel pumps are for gasoline only.
( 10 )
$55.95
—
$58.95
Carbureted or EFI, Edelbrock has rebuild kits to service their fuel pressure regulators. They include diaphragm and hardware to renew performance and keep operation at optimum levels. Control the flow efficiently after overhauling your fuel pressure regulator with rebuild kits from Edelbrock.
( 2 )
$50.95
Edelbrock knows carbs. That's why they offer these calibration kits for Performers series carburetors. They include all the parts you need to help you get the best performance from Edelbrock carburetors.
( 201 )
$66.95
—
$96.95
Edelbrock electric chokes kits are designed to give you reliable starting in all weather conditions. The kits include all necessary parts to convert your carburetor into an electric choke operation.
( 117 )
$97.95
Edelbrock AVS2 Series carburetor calibration kits contain all the necessary metering rods and jets that will allow you to adjust your AVS2 carburetor—either richer or leaner for both cruising and power modes. Several kits are offered, each consisting of an assortment of jets, step-up springs, metering rods, retaining springs, replacement hairpin springs, and a calibration chart that tells which rod/jet combination to use for your carburetor model. A handy reusable storage case is included to hold kit contents. Order the kit recommended for your carb application.
( 73 )
$88.95
Choose from a variety of throttle linkage kits from Edelbrock for your dual carburetor equipped car. From smooth, progressive throttle activation to adjustable forward mount styles that let you dial in the amount of throttle you want, we have a linkage kit that's right for you.
( 40 )
$57.95
—
$94.95
Edelbrock Performer fuel line and fitting kits include the braided flex hose and pre-assembled ends to connect your fuel filter to the mechanical fuel pump—or, in racing applications, to the fuel pressure regulator. These kits are available in a variety of styles, providing leak-free installation in minutes. When plumbing a fuel system, trust the aftermarket performance expertise of Edelbrock!
( 114 )
$50.95
—
$69.95
These Edelbrock head bolt bushing kits allow you to use stock or aftermarket head bolts with Edelbrock or other aftermarket cylinder heads. They take the place of your head bolt washers and are hardened and chamfered.
( 15 )
$95.95
Edelbrock Thunder Series AVS carburetor calibration kits are designed to tune your car to match any engine or track condition. These kits (except for special applications) include an assortment of metering rods and jets, a pair of metering rod retaining springs, and a complete assortment of step-up springs.
( 31 )
$87.95
—
$88.95
Edelbrock VRS-4150 carburetor gasket kits contain eight metering block to main body, and eight fuel bowl to metering block gaskets. The VRS carbs use a unique metering block gasket to accommodate the 4-circuit fueling system. Gasket material is non-stick has superior sealing qualities. Additional notes: * Use VRS production gaskets for best fit and performance * Kit includes enough gaskets for four carburetor services * Strong durable VR-55 material for a lasting seal * This gasket kit uses OEM gaskets from the VRS-4150 line of 4-circuit carburetors
( 1 )
$51.95
Designed to take the guesswork out of carb swaps, these fuel line and filter kits provide a quick, leak-free installation in a matter of minutes. They'll work with all Performer and some other brands of carbs and are available in different forms for a variety of applications.
( 36 )
$50.95
Designed for use with Edelbrock's single and dual feed fuel line kits, these high-quality stainless steel braided lines make it simple to complete your installation of any Edelbrock fuel pump to fuel filter. Russell anodized aluminum fittings are included.
( 43 )
$92.95
—
$97.95
Designed to fit all Edelbrock square-bore carbs, Edelbrock single-feed fuel line kits provide a clean and custom plumbing solution for your Edelbrock carburetors. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. Edelbrock single feed fuel line kits are the right choice for your hot rod.
( 376 )
$50.95
—
$52.95
Edelbrock universal fuel hose and filter kits allow you to add a fuel filter where none existed. Utilizing part of your stock steel fuel line, they offer a quick fix--simply cut the stock line, install the compression fitting, add the neoprene hose, clamp, and fuel filter, and connect to your carburetor. Kits include fuel filter, fuel hose, special fittings to adapt 5/16 in. and 3/8 in. steel line to hose, and stainless steel worm-type hose clamps. Keep your fuel clean with Edelbrock universal fuel hose and filter kits.
( 22 )
$60.95
Edelbrock rocker arm stud bolt kits are designed for use with the Edelbrock Performer and RPM small block Chevy and Ford cylinder head applications. These screw-in style rocker arm stud bolts are manufactured from high-quality material for strength and durability and run in straight and true to offer nothing less than positive seating.
( 24 )
$64.95
—
$67.95
Are you looking for quality fuel lines for your dual-quad setup? These dual-quad fuel line kits from Edelbrock feature two ports to supply fuel to two Edelbrock carbs when used with a dual-quad intake manifold.
( 22 )
$90.95
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 227 )
$58.95
—
$61.95
These Edelbrock electric fuel pump relay kits will help to reduce the risk of damaging your fuel pump. They will provide consistent fuel pressure to the regulator or carburetor to eliminate possible engine damage. These Edelbrock fuel pump relay kits include a wiring harness and single-blade connection for an easy hookup.
( 13 )
$83.95
Edelbrock has you covered when it comes to your valvetrain needs. Their valve spring locator and seal kits create a barrier between the valve springs and heads to prevent unwanted spring movement.
Not Yet Reviewed
$65.95
Edelbrock aluminum timing covers are the perfect way to add strength and durability to the front of your engine, not to mention increased looks. These die-cast covers are available in multiple configurations depending on application.
( 35 )
$82.95
These carburetor adapters from Edelbrock allow you to use almost any carburetor on almost any intake. They will save you the hassle and expense of purchasing all-new components when changing carburetors or intakes.
( 206 )
$62.95
—
$87.95
Edelbrock universal micro electric diesel fuel pumps are designed to deliver maximum performance in a compact package. They feature a durable, simple design that reduces the chance of vapor lock and flooding. The fuel pumps are easy to install and operate quietly, so you won't know they're there! Each pump includes a fuel filter, mounting hardware, and instructions for a hassle-free installation. Edelbrock universal micro electric fuel pump details: * For use with standard 12 V negative ground systems with 1 amp draw at maximum delivery * Easy to set up 2-wire design * Gravity fed inline, self-priming, and regulating design * Can also be used as a lift or transfer pump * Designed for use with automotive and industrial applications
( 4 )
$84.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
