Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Edelbrock LS Pro-Flo 4 EFI Harnesses
Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.
( 3 )
$117.95
Edelbrock Max-Fire Ultra-Spark 50 Spark Plug Wire Sets
Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets deliver maximum power output. Engineered for high performance engines that need all the voltage they can get, Max-Fire wires are constructed of leads that transport a low 50 ohms of resistance per ft. for maximum EMI/RFI noise suppression. Each Ultra-Spark starts with a spiral wound Ferro-magnetic KEVLAR® core wrapped with a suppression layer, stainless steel conductive winding, and a latex silicone layer. This is followed by an EPDM inner insulation topped with braid tape and a tempered 8.5mm silicone outer jacket that won't crack or shrink, and is resistant to chemicals. The wires are finished with silicone plug boots featuring high-quality snap and lock-style terminals for easy installation. Give your engine the most power possible with Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets.
( 52 )
$106.95
Edelbrock Replacement Water Pump Cartridges
Edelbrock replacement water pump cartridges are designed for use with the GM LS water pumps. They have a satin aluminum finish. The Edelbrock Victor Series water pumps provide maximum cooling for the street and the race track. They're ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motor homes. So, if you have an Edelbrock water pump, these replacement water pump cartridges have you covered.
( 2 )
$244.95
Edelbrock Aluminum Fuel Rails
CNC-machined from aluminum extrusions, these Edelbrock aluminum fuel rails have a flow-through design and fittings on both ends where applicable. Designed for Edelbrock EFI manifolds, they come with all necessary hardware.
( 61 )
$187.95
—
$247.95
Edelbrock LS1/LS6 Valley Plates
Edelbrock LS1/LS6 valley plates are intended for use on 1997-2004 GM LS1/LS6 engines and similar GM Gen III engines that have been converted from EFI to carbureted setups. They include a breather boss that will need to be drilled and tapped by those retaining the stock LS6 breather configuration, or for LS1 users looking to convert to an LS6 style.
( 2 )
$207.95
Edelbrock Pro-Flo 4 Plus Self-Learning Engine Management System Harnesses
Edelbrock Pro-Flo 4 Plus EFI self-learning engine management system harnesses are offered to support your specific configuration. With an eye toward making your hot rod transplant simple and successful, Edelbrock has created several add-on harnesses. They include LS drive-by-wire, knock sensor, a second oxygen sensor, and 2- or 4-wire LS alternators to radiator fan relay harnesses to complete and/or expand your base Chevy LS, Mopar Gen III Hemi, and Ford Coyote Pro-Flo 4 Plus EFI kits.
( 2 )
$119.95
—
$149.95
Edelbrock Billet Main Caps
Edelbrock billet main caps are precision CNC-machined steel for complete accuracy. They maximize the mating surface for maximum support. These optimized billet main caps are what your LS engine needs for added strength.
Not Yet Reviewed
$130.95
Edelbrock Hex-A-Just Timing Sets
With Edelbrock Hex-A-Just timing sets, infinitely adjustable cam timing is as simple as turning an Allen wrench. Consisting of SAE 1144 billet steel cam and crank sprockets and a true roller timing chain, Edelbrock Hex-A-Just timing sets use a special hex-head bushing installed on your cam's dowel pin. This bushing lines up with degree marks on the cam sprocket. You can adjust timing in fractions of a degree by loosening the cam bolts and turning the bushing with an Allen wrench. Edelbrock Hex-A-Just timing sets install under your stock timing cover and can be used in align-bored blocks. Order the model recommended for your application.
Not Yet Reviewed
$233.95
Edelbrock Camshaft Retainer Plates
Edelbrock camshaft retainer plates are replacement thrust plates designed to fit and to support a greater cam load. The solid bronze plates fit with LS aluminum race blocks. Order the model tailored for your vehicle and engine application.
Not Yet Reviewed
$141.95
Edelbrock Enforcer Supercharger Pulleys
Edelbrock Enforcer supercharger pulleys are designed to be used with Edelbrock's LS dual-quad supercharger systems. They are built with top quality materials and have a durable finish that will last.
Not Yet Reviewed
$246.95
Edelbrock Cylinder Sleeves
Edelbrock engine cylinder liner sleeves are available in multiple lengths and diameters for individual cylinder applications. The bore sleeves are made of spun cast iron. They are included with the purchase of an Edelbrock standard or tall deck LS bare race block, but are also available here as replacements for worn or damaged originals.
Not Yet Reviewed
$108.95
Edelbrock Universal Water Pump Pulleys
These Edelbrock universal water pump pulleys are designed to work with Edelbrock water pumps. They feature billet aluminum construction and a hard-anodized finish.
( 6 )
$118.99
Edelbrock GM Stepper IAC Motors with Gasket
Automobile engines are a perfect balance of science and mechanical engineering. Each part is designed to interact with the other in perfect harmony to produce a means of transportation. One very small, but very vital component found in this mass orchestra of mechanics is the idle air control valve, or better known to mechanics as the IAC. Edelbrock offers their version, the GM stepper IAC motors, that also includes a valve gasket. The IAC valves adjust the airflow to improve motor idling. The gasket provides a tight seal to avoid a leaky throttle system, which could be a nuisance and also dangerous.
( 1 )
$124.95
Edelbrock Pro-Flo XT EFI Fuel Rail Kits
Edelbrock Pro-Flo XT EFI fuel rail kits are designed for use with your Edelbrock Pro-Flo XT EFI system. Made of high-quality materials, they have a beautiful finish with the Edelbrock Pro-Flo XT logo and hardware is included.
( 1 )
$226.95
Edelbrock RPM-Link Adjustable Timing Sets
Now, you can dial-in your camshaft with ease with our RPM-link roller timing chain set. RPM-link timing chain bolt onto your engine just like any other timing chain set, so there's no machining required and no need for special offset bushings for installation. Made from induction hardened billet steel, it allows for a quick cam timing adjustment to plus or minus six degrees.
Not Yet Reviewed
$203.95
