Availability
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 441 )
$374.95
—
$595.95
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 33 )
$495.99
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$575.95
$305.96
—
$540.95
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$595.95
$267.26
—
$536.36
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$299.95
—
$484.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 570 )
$617.95
$312.26
—
$584.95
On Sale
Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.
( 61 )
$425.95
—
$487.95
$383.36
—
$439.16
Why are Performer RPM cam and lifter kits the heart of the Total Power Package? Because Edelbrock designs them to perfectly match the powerband of their Performer RPM series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about parts compatibility, and you can be sure that all of the combinations will perform. The kits are recommended for high-performance street and strip use. Their powerband is from 1,500 to 6,500 rpm, and they maintain 10 to 12 in. of vacuum at idle.
( 42 )
$385.95
—
$410.95
Edelbrock Performer-Plus cam and lifter kits are designed for optimum torque from the low-end to the mid-range. They feature smooth idling cams for daily drivers, trucks, vans, RVs, and 4x4s. They offer improved throttle response and torque. Each kit includes a camshaft, hydraulic lifters, assembly lube, and instructions.
( 117 )
$297.95
—
$351.95
Get maximum cooling for the street or track. Edelbrock Victor Series high-volume water pumps are designed for maximum flow and equal coolant distribution in street cars, race cars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined impellers are larger than other impellers and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leakproof seals, and gaskets. Most Victor Series pumps are available in your choice of satin, black, and polished finishes, or EnduraShine.
( 176 )
$323.95
—
$564.95
On Sale
Edelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct "line-of-sight" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.
( 53 )
$463.95
—
$569.95
Performer Air-Gap intake manifolds incorporate technology from Edelbrock's potent Victor series manifolds, with an air-gap design feature for ultimate street performance from idle to 5,500 rpm. The air-gap is an open air space which separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge, meaning more power and excellent throttle response throughout the power band. Order the Edelbrock Performer Air-Gap intake manifold best suited for your application.
( 31 )
$377.99
—
$530.95
On Sale
Edelbrock Performer RPM Vortec intake manifolds are based on their highly successful Performer family. They're designed for street rods, marine applications, and a host of engine swaps using small block Chevy V8s with 1996 and later Vortec (L31) cast iron heads or Edelbrock's E-Tec aluminum heads. They accept single square bore carbs only and have an external water bypass boss machined into the front of the water crossover for use on 1996 and later Vortec production engines. Their 1,500 rpm to 5,500 rpm power band makes them an excellent choice for a wide range of setups.
( 21 )
$389.95
$350.96
On Sale
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 53 )
$281.95
—
$454.95
On Sale
Edelbrock Victor Jr. carbureted intake manifolds are capable of supporting up to 600 hp. They accept a standard 4-barrel square bore carburetor. The manifolds are made of high-quality aluminum and feature a natural finish. The required electronic timing control module is sold separately .
( 9 )
$432.95
—
$476.95
$389.66
—
$429.26
On Sale
Edelbrock Performer RPM LS1 intake manifolds are manifold-only packages that allow you the opportunity to use a carburetor on these originally computer-controlled engines. Edelbrock LS1 intake manifolds are manufactured from aluminum and offer you the ability to maximize torque and increase the power curves of your engine. Are you going back to the traditional carburetor? Rely on Edelbrock Performer RPM intake manifolds.
( 12 )
$407.95
—
$605.95
$367.16
—
$484.76
On Sale
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$482.95
$305.96
—
$540.95
Edelbrock Victor LS throttle bodies are constructed from billet aluminum and come complete with TPS and IAC, maximizing performance upgrades on all Pro-Flo XT, EFI Victor Elbow, and Gen III and Gen IV engines with cable-driven throttle bodies. With bolt patterns for both LS generations, these enlarged single-bore throttle bodies feature a progressive throttle linkage and parabolic bore design for increased power and enhanced low-speed drivability. A thicker throttle blade eliminates deflection for boosted applications, while a beefed-up linkage and dual-spring mechanism ensure safety and total throttle control.
( 1 )
$329.95
On Sale
Make some noise with Edelbrock Rollin' Thunder hydraulic roller camshafts. Designed to improve horsepower and torque, they feature more aggressive profiles than conventional flat-tappet hydraulic cams without excessive valve overlap. Recommended for high performance street and strip use, Edelbrock Rollin' Thunder hydraulic roller camshafts work best from 1,500 to 6,500 rpm and are performance matched to Edelbrock Total Power Package components for proven performance. Features Include: * Performance--roller camshafts generate higher lift velocity and faster valve action for increased horsepower and torque gains * Drivability--produces great sounding idle with excellent vacuum at idle * Durability--the smaller surface contact area of roller tappets and their reduced friction, together with stronger camshaft material (hardened steel or iron) ensures longer camshaft life * Environmental--can use ILSAC GF-4 oil, which lowers emissions and does not require zinc or phosphate oil additives * Economy--reduced contact friction between the lifter and camshaft can increase fuel economy for better mileage
( 28 )
$474.95
$379.96
—
$555.95
These Edelbrock Victor series high-volume water pumps with PermaStar are designed for maximum flow and equal coolant distribution in street cars, racecars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined, cast iron impellers are larger than other impellers, and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leak-proof seals and gaskets. The PermaStar finish is a high performance coating that gives a super show quality smoked chrome looking finish that will not oxidize or fade and cleans easily.
( 12 )
$365.95
—
$430.95
On Sale
Edelbrock Victor Jr. EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds are designed to replace the stock mono blade throttle bodies and give you throttle body options; fuel rail set, fuel injectors, fuel pump, and regulator are all required (each sold separately). If you decide not to maintain your EFI setup, you can also use these Victor Jr. EFI intake manifolds to convert to a carburetor.
( 10 )
$562.95
$506.66
—
$549.95
Edelbrock C-26 dual quad intake manifolds are designed for 1955-86 262-400 c.i.d. small block Chevys. These intake manifolds have a low-profile design for low hood clearance on most vehicles. Edelbrock includes air conditioning bosses and front oil-filler tube bosses, however, stock alternator brackets will not fit. The distance between carburetor centers is 6 7/16 in.
( 2 )
$530.95
Edelbrock Super Victor LS3 fuel rail kits are specifically designed to be used with your Super Victor LS3 manifold to give your ride its peak performance. These kits are ideal for helping you build a 700 hp and higher carbureted or EFI large-displacement racing engine, operating between 3,500 and 7,500 rpm. They are exactly what you need when working on nitrous or forced induction applications. So, if you're working on making the perfect LS3 race engine, Edelbrock Super Victor LS3 fuel rail kits are must-haves.
Not Yet Reviewed
$296.95
Edelbrock Pro-Tuner EFI distributors are designed for use with the Victor and Super Victor Pro-Tuner EFI systems and are also compatible with other aftermarket EFI management systems. They have a magnetic crank pickup and use a Hall-Effect pickup with an LED indicator for the camshaft sensor. Their cam sync pickup can be adjusted manually or with EFI Management software. The cam sync has a 12 in. lead with a 3-prong Weatherpack connector. The crank trigger has an 8 in. lead with a 2-prong Weatherpack connector.
( 3 )
$458.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
