Availability
Edelbrock Pro-Flo 4 and Max-Fire Ford 289-347 and 351W distributor gears are specifically designed for Pro-Flo 4 and Max-Fire distributors in engines that are running a steel-core hydraulic roller camshaft. Made from steel, these distributor drive gears are an optional replacement part for the iron gear that comes installed with the distributor. Edelbrock also marks these distributor drive gears with a yellow painted dot for easy identification.
Not Yet Reviewed
$34.95
Edelbrock Pro-Tuner EFI distributors are designed for use with the Victor and Super Victor Pro-Tuner EFI systems and are also compatible with other aftermarket EFI management systems. They have a magnetic crank pickup and use a Hall-Effect pickup with an LED indicator for the camshaft sensor. Their cam sync pickup can be adjusted manually or with EFI Management software. The cam sync has a 12 in. lead with a 3-prong Weatherpack connector. The crank trigger has an 8 in. lead with a 2-prong Weatherpack connector.
( 3 )
$458.95
Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.
( 3 )
$90.95
—
$117.95
Edelbrock Max-Fire Ford 289-302 steel distributor gears are designed specifically for use on Max-Fire distributors—in Ford small block 289-302 engines running a hydraulic roller camshaft with a billet steel core. These drive gears are designed specifically for small block Ford Max-Fire distributors with 0.467 in. diameter shaft and 0.250 in. hex oil pump drive. The gears are an optional replacement part for the iron gears that are identified by an orange paint dot that come pre-installed on the distributors. These new steel gears feature a white paint dot for easy identification.
( 6 )
$34.95
Edelbrock Pro-Flo EFI and Max-Fire bronze distributor gears are designed specifically for Pro-Flo 4 and Max-Fire distributors. These drive gears are an optional replacement part for the iron gears that come installed on the Pro-Flo 4 and Max-Fire distributors. The bronze gears are intended for high performance and race applications which require distributor drive gears that conform to the camshaft gear. This type of gear is designed to be sacrificial and should be inspected regularly and replaced when worn.
Not Yet Reviewed
$60.95
Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design
( 1 )
$1,879.95
—
$2,379.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
