Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Edelbrock Pro-Flo 4 Fuel Pump Relay Kits
Edelbrock Pro-Flo 4 fuel pump relay kits were created to handle the high current that your EFI system needs to get the fuel from the tank to the engine. These relay kits help prevent voltage drops to ensure your fuel pump gets full voltage from your vehicle's battery to provide consistent fuel pressure to the regulator. These Pro-Flo 4 fuel pump relay kits are designed to plug into a Pro Flo system and come terminated with a fuse already inline.
( 3 )
$163.95
Edelbrock Electric Fuel Pump Relay Kits
These Edelbrock electric fuel pump relay kits will help to reduce the risk of damaging your fuel pump. They will provide consistent fuel pressure to the regulator or carburetor to eliminate possible engine damage. These Edelbrock fuel pump relay kits include a wiring harness and single-blade connection for an easy hookup.
( 13 )
$83.95
Edelbrock Pro-Flo 4 EFI ECU and Electronics Kits
Edelbrock Pro-Flo 4 EFI ECU and electronics kits provide an economical, plug-and-play solution for enthusiasts who want to keep their existing EFI induction system (intake manifold, fuel rails, and accessories), but want the performance advantages of the Pro-Flo 4 EFI system. These kits include supporting sensors, a distributor, an ECU, wideband O2 sensor, wiring harness, and additional components for the specified application, and each EFI system has both fuel and spark control features. Components are controlled with iOS/Android E-Tuner software. More details: * ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio * Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones * Software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors. Also, a fuel pump, regulator, and fuel lines are not included.
Not Yet Reviewed
$1,364.95
—
$1,377.95
Edelbrock Mass Airflow Sensor Kits
Edelbrock mass airflow sensor kits are the perfect upgrades for any MAFS-equipped vehicle with performance upgrades that have elevated airflow above the range of the stock sensor. They feature a large, 95mm venturi housing that reduces airflow restriction and improves overall horsepower potential. The sensor is manufactured with an injection-molded housing for OEM-level precision with a modern, blade-style element for the latest in technology.
Not Yet Reviewed
$236.95
Edelbrock Pro-Flo 4 EFI Standalone ECU and Harness Kits
Edelbrock Pro-Flo 4 EFI standalone ECU and harness kits provide an economical, EFI solution ideal for legacy Pro-Flo EFI system users or those with an existing yet poor-performing competitor EFI system looking to convert to PF4 EFI. These kits can be used with any application for which Edelbrock offers a Pro-Flo 4 distributor. Each standalone kit includes ECU, supporting sensors, a wideband O2 sensor, and wiring harness. The ECU controls both fuel and spark, and includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio. Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones, and the software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must purchase a Pro-Flo distributor (specific to the application) and provide an induction system, including EFI manifold, throttle body, 1-bar MAP sensor, fuel rails, injectors, fuel pump, regulator, and fuel lines.
Not Yet Reviewed
$1,126.95
Edelbrock Spark Plug Wire Separators
Edelbrock spark plug wire separators are designed to protect your plug wires from contact with hot engine components—and prevent ignition crossover by keeping them separate from each other. These durable plastic separators securely grip up to four plug wires and feature the script Edelbrock logo.
( 5 )
$23.95
Edelbrock Max-Fire Distributors
Edelbrock Max-Fire distributors are ready to run right out of the box—and are the perfect upgrade for your ignition system. They're ideal for replacing or upgrading from a points triggered distributor. Max-Fire kits feature precision machining for a perfect fit, along with a simple 3-wire hook-up for an easy installation (with no need to run an external ignition control box). The centerless ground shaft utilizes an upper sealed roller bearing with an extra-long lower bronze Oil-Lite bushing for smooth operation. The high-output magnetic pickup and large paddle wheel reluctor deliver a strong trigger signal at high RPM for maximum performance. All of these features allow Max-Fire distributors to provide unrivaled voltage to the coil, ensuring that you're getting maximum performance from your engine. (Edelbrock also recommends a new Max-Fire coil for maximum voltage output, ensuring you get the most from your high performance engine at higher RPM's.) Each distributor includes a cap, rotor, retainer and mechanical advance curve kit. Order the model recommended for your year/make and engine application.
( 15 )
$395.95
—
$494.95
Edelbrock Pro-Flo 4 LS Self Learning Engine Management Systems
Edelbrock Pro-Flo 4 LS self learning engine management systems include an engine control unit (ECU) and engine wiring harness designed to run Gen III LS engines equipped with a 24x reluctor wheel or Gen IV engines equipped with a 58x reluctor wheel. This kit is perfect for LS engine swaps where you still want to retain the factory intakes and injectors. These Pro-Flo 4 engine management systems are designed to give the same self-learning capabilities and functionality of Edelbrock's Popular Pro-Flo 4 EFI complete systems while maintaining the factory look. It is recommended to regularly check for firmware updates.
( 6 )
$1,210.95
—
$1,222.95
Edelbrock Supercharged Coil Covers
Edelbrock Supercharged coil covers dress up your engine. These cover kits are geared towards those with Edelbrock competition versions of the supercharger kits, which do not include coil covers, but would like to add them. The covers are designed to fit around the supercharger units, are available in many styles in black, red, or red and black, and feature a "Supercharged" logo design.
Not Yet Reviewed
$447.95
—
$601.95
Edelbrock Pro-Flo 4 Plus Self-Learning Engine Management Systems
Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design
( 1 )
$1,879.95
—
$2,505.95
Edelbrock Pro-Flo 4 Engine Control Units
For those running a Pro-Flo 4 or Pro-Flo 4 XT on your vehicle, Edelbrock now offers a replacement ECU. Edelbrock Pro-Flo 4 engine control units are a new service item for customers who need to replace a damaged original or would like to carry an additional ECU as a spare. Order the model designed for your fuel injection kit application.
( 5 )
$654.95
Edelbrock LS Pro-Flo 4 EFI Harnesses
Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.
( 3 )
$90.95
—
$117.95
Edelbrock Pro-Flo 4 Plus Self-Learning Engine Management System Harnesses
Edelbrock Pro-Flo 4 Plus EFI self-learning engine management system harnesses are offered to support your specific configuration. With an eye toward making your hot rod transplant simple and successful, Edelbrock has created several add-on harnesses. They include LS drive-by-wire, knock sensor, a second oxygen sensor, and 2- or 4-wire LS alternators to radiator fan relay harnesses to complete and/or expand your base Chevy LS, Mopar Gen III Hemi, and Ford Coyote Pro-Flo 4 Plus EFI kits.
( 2 )
$33.95
—
$149.95
Edelbrock QwikData Analog Thermocouple Extension Wiring Harnesses
Edelbrock QwikData analog thermocouple extension wiring harnesses are general-purpose 4 ft. cables assembled with plugs. They will extend general-purpose thermocouple harnesses to TK-4 thermocouple converters.
Not Yet Reviewed
$67.95
