Availability
Edelbrock Max-Fire distributors are ready to run right out of the box—and are the perfect upgrade for your ignition system. They're ideal for replacing or upgrading from a points triggered distributor. Max-Fire kits feature precision machining for a perfect fit, along with a simple 3-wire hook-up for an easy installation (with no need to run an external ignition control box). The centerless ground shaft utilizes an upper sealed roller bearing with an extra-long lower bronze Oil-Lite bushing for smooth operation. The high-output magnetic pickup and large paddle wheel reluctor deliver a strong trigger signal at high RPM for maximum performance. All of these features allow Max-Fire distributors to provide unrivaled voltage to the coil, ensuring that you're getting maximum performance from your engine. (Edelbrock also recommends a new Max-Fire coil for maximum voltage output, ensuring you get the most from your high performance engine at higher RPM's.) Each distributor includes a cap, rotor, retainer and mechanical advance curve kit. Order the model recommended for your year/make and engine application.
( 15 )
$395.95
—
$494.95
Edelbrock Pro-Tuner EFI distributors are designed for use with the Victor and Super Victor Pro-Tuner EFI systems and are also compatible with other aftermarket EFI management systems. They have a magnetic crank pickup and use a Hall-Effect pickup with an LED indicator for the camshaft sensor. Their cam sync pickup can be adjusted manually or with EFI Management software. The cam sync has a 12 in. lead with a 3-prong Weatherpack connector. The crank trigger has an 8 in. lead with a 2-prong Weatherpack connector.
( 3 )
$458.95
Edelbrock Pro-Flo 4 ignition coils are designed for use with electronic ignitions and produce an impressive 45,000 volts of power. Edelbrock kept the standard cylinder shaped housing and even gave it a satin black finish, so it will look right at home under the hood of your hot rod. These coils are an ideal complement to Edelbrock Pro-Flo 4 EFI systems.
( 14 )
$52.95
When you buy that new Max Fire distributor, don't forget a new Edelbrock distributor hold-down clamp. Made from top-quality materials, they're the perfect way to dress up your engine compartment.
( 23 )
$14.95
Edelbrock Max-Fire ignition coils are designed with higher resistance for increased energy output at higher rpm, when compared to an OEM coil. They're ideal for use with turbocharged and supercharged applications or engines that have been converted to E85 fuel. Available in a various finishes and styles, Edelbrock Max-Fire ignition coils are what you need to make your performance engine build complete.
( 10 )
$46.95
—
$76.95
Edelbrock Max-Fire Coil On Plug ignition coils are designed with higher resistance for increased energy output at higher rpm, when compared to an OEM coil. They're ideal for use with turbocharged and supercharged applications or engines that have been converted to E85 fuel. The coils are sealed with a high temperature epoxy for shock and vibration resistance—as well as excellent thermal conductivity. The spark plug spring contact is made from stainless steel, with a ferrite lug to reduce EMI/RFI noise; while the boots are molded from a high temperature silicone compound for superior heat resistance up to 550 degrees F. Order the direct bolt-on OEM coil pack recommended for your vehicle.
( 5 )
$40.95
—
$342.95
Edelbrock Pro-Flo 4 and Max-Fire Ford 289-347 and 351W distributor gears are specifically designed for Pro-Flo 4 and Max-Fire distributors in engines that are running a steel-core hydraulic roller camshaft. Made from steel, these distributor drive gears are an optional replacement part for the iron gear that comes installed with the distributor. Edelbrock also marks these distributor drive gears with a yellow painted dot for easy identification.
Not Yet Reviewed
$34.95
Edelbrock Max-Fire distributor caps are the perfect-fit replacements. Just like the originals, they're molded in high-quality, 30 percent glass-filled polyester for durability and carbon tracking resistance. Available in a choice of styles, the caps include retainer and hardware. For the ignition performance you expect, service your Max-Fire distributor with genuine Edelbrock caps.
Not Yet Reviewed
$45.95
Edelbrock Pro-Flo 4 distributor rotors are designed as direct replacements for the rotor that came with your Pro-Flo 4 ignition system's distributor. When rotors are worn out they can cause the engine to misfire or not start. Edelbrock Pro-Flo 4 distributor rotors will get your vehicle running again.
( 6 )
$18.95
Edelbrock Max-Fire Ford 289-302 steel distributor gears are designed specifically for use on Max-Fire distributors—in Ford small block 289-302 engines running a hydraulic roller camshaft with a billet steel core. These drive gears are designed specifically for small block Ford Max-Fire distributors with 0.467 in. diameter shaft and 0.250 in. hex oil pump drive. The gears are an optional replacement part for the iron gears that are identified by an orange paint dot that come pre-installed on the distributors. These new steel gears feature a white paint dot for easy identification.
( 6 )
$34.95
Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.
( 3 )
$90.95
—
$117.95
Edelbrock Pro-Flo EFI and Max-Fire bronze distributor gears are designed specifically for Pro-Flo 4 and Max-Fire distributors. These drive gears are an optional replacement part for the iron gears that come installed on the Pro-Flo 4 and Max-Fire distributors. The bronze gears are intended for high performance and race applications which require distributor drive gears that conform to the camshaft gear. This type of gear is designed to be sacrificial and should be inspected regularly and replaced when worn.
Not Yet Reviewed
$60.95
Edelbrock Supercharged coil covers dress up your engine. These cover kits are geared towards those with Edelbrock competition versions of the supercharger kits, which do not include coil covers, but would like to add them. The covers are designed to fit around the supercharger units, are available in many styles in black, red, or red and black, and feature a "Supercharged" logo design.
Not Yet Reviewed
$447.95
—
$1,068.95
Edelbrock LS1/LS6 aluminum ignition coil covers are a great, and affordable way to dress up Chevrolet Gen III LS Series engines. They are manufactured from cast aluminum and available in a natural, polished, or black powdercoated finish. These LS1/LS6 coil covers eliminate the need for the factory coil pack bracket by mounting the ignition coil packs directly to the underside of the covers. Install a set of the Edelbrock LS1/LS6 aluminum ignition coil covers and create a clean, custom under the hood look for your ride.
( 5 )
$353.95
—
$492.95
Edelbrock Max-Fire distributor rotors are the perfect-fit replacements. Just like the originals, they're molded in high-quality, 30 percent glass-filled polyester for durability and carbon tracking resistance. They feature brass contacts and stainless steel rotor springs for maximum conductivity. For the ignition performance you expect, service your Max-Fire distributor with genuine Edelbrock rotors.
Not Yet Reviewed
$17.95
Use Edelbrock ignition coil brackets when you need to mount a canister-style ignition coil. These steel brackets have a black coating for looks and protection. They're available for hundreds of applications from the 1950s, '60s, and '70s. Finish your build with a Edelbrock ignition coil bracket to secure your coil and give your engine bay a professional look.
( 2 )
$39.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
