Earl's Fittings & More Performance Plumbing at Summit Racing

Earl's Performance EFI Vapor Guard Hoses

The fuel additives used in today's vehicles can cause your conventional rubber hoses to breakdown over time. Earl's Performance EFI Vapor Guard hoses are a unique, 3-layer barrier to fuel penetration. Vapor Guard's secret is in its layers. The innermost primary barrier layer offers high resistance to heat and aggressive fuels. The middle barrier is a thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose. The exterior over-barrier provides extreme tolerance to heat and ozone, giving Vapor Guard hoses a 3-way shield against hose deterioration. Make sure that your vehicles get the fuel they need to get you where you need to go.

4.91 out of 5 stars ( 34 )

$6.92

—

$163.95

Earl's Performance Power Steering Hose

Earl's Performance power steering hoses are triple-steel and fabric braid-reinforced high-pressure hoses. They were developed specifically to meet the demands of power steering systems. These flexible hoses are also suitable for hydraulic and air lines, and come with a blue or black fabric outer covering. When used with Earl's power steering hose ends, Earl's power steering hose is rated for up to 2,250 psi operating pressures. The use of other manufacturer's hose ends is not recommended.

4.61 out of 5 stars ( 28 )

$13.00

—

$299.95

On Sale

Earl's Performance Vapor Guard Hose Ends

Defend your ride from modern fuels with Earl's Performance vapor guard accessories like these vapor guard hose ends. Made from quality aluminum, these hose ends feature a special smooth retention band that retains your hose under pressure, while also ensuring that the hose line is not damaged. They're bright-dip anodized to offer long service life, even when used with today's harsh fuels. They make assembly a snap! Simply cut the hose, push the vapor guard hose ends on and tighten the clamps, that's all there is to it! Choose from an assortment of sizes and fittings styles--45 degree, 90 degree, or straight--to best suit your project needs.

4.9 out of 5 stars ( 170 )

$14.85

$5.70

—

$18.62

On Sale

Earl's Performance Speed-Flex Brake Lines

Earl's Performance Speed-Flex brake lines are factory-assembled brake lines made from the same Speed-Flex stainless steel braid-protected hose of extruded PTFE that is the worldwide standard of the racing industry for flexible brake, clutch, and instrument hoses. They're assembled with Earl's Speed-Flex crimp or swaged permanently-installed hose ends. Speed-Flex brake lines provide a firmer brake pedal, improved brake pedal feel, and better brake modulation. Each hose is pressure tested to 4,000 psi.

4.56 out of 5 stars ( 105 )

$37.43

$21.11

—

$68.25

Earl's Performance Carburetor Vapor Guard Hoses

Earl's Performance carburetor Vapor Guard hoses combat modern fuel's deterioration and eliminate the safety hazards associated with fuel vapors and the leakage that occurs as the traditional rubber hoses deteriorate. Earl's Vapor Guard hoses are multi-layered and designed to withstand the corrosive properties of modern fuels. The initial layer offers high resistance to heat and aggressive fuels, and they save one gallon of gas each year as compared to traditional rubber hoses from permeation alone. Earl's Vapor Guard hoses are your long-lasting hose solution!

5.0 out of 5 stars ( 5 )

$7.12

—

$130.95

On Sale

Earl's Performance Pro-Lite 350 Hose

Earl's Performance Pro-Lite 350 hose is constructed from a tough, abrasion-resistant nylon sheathing banded to the textile inner braid that's embedded in the synthetic rubber liner. This gives the hose incredible flexibility, while maintaining the ability to withstand high vacuum and hot oil temperatures. The hoses are rated to withstand a maximum pressure of 350 psi and an operating temperature range of -40 to +300 degrees F. Pro-Lite 350 hose can take the most demanding conditions and still deliver you to the winner's circle.

4.96 out of 5 stars ( 24 )

$649.95

$15.80

—

$1,177.95

On Sale

Earl's Performance Auto-Flex Hose

These high-temperature elastomeric auto-flex hoses are ideal for almost all street and marine applications, and many non-critical competition uses. These high-quality hoses have a nice looking stainless braided outer cover that protects the synthetic rubber inner liner, allowing continuous operating temperatures of -40 degrees to 300 degrees F. These auto-flex hoses are good for fuel, oil, water, and many other fluids.

4.8 out of 5 stars ( 30 )

$265.95

$13.36

—

$562.95

Earl's Performance Pro-Lite Ultra Hose

Earl's Performance Pro-Lite Ultra hose is the premier choice for your hot rod or race car. It features advanced designs that make the hose ideal for high-pressure applications up to 500 psi. Their inner tube of oil-resistant "PKR" synthetic rubber won't degrade or leak when exposed to most fluids, and it's reinforced with a stainless steel braid that greatly increases the hoop strength—keeping the hose from bulging or separating from its fittings. Finally, the braided nylon fiber cover is resistant to oil, abrasion, and extreme weather, keeping Pro-Lite Ultra hose looking great and functioning the way it's meant to.

5.0 out of 5 stars ( 3 )

$14.31

—

$699.95

Earl's Performance Power Steering Hose Ends

Due to extreme pressure spikes at the end of steering travel, power steering hose requirements are among the toughest in the industry. These steel power steering hose ends from Earl's have been developed specifically to meet these requirements. They're available in a variety of sizes to suit your needs.

4.64 out of 5 stars ( 67 )

$16.89

—

$68.25

Earl's Performance Speed-Flex Hose

Earl's Performance Speed-Flex hose is used with the Speed-Seal reusable hose ends and can handle pressure of up to 3,000 psi. Earl's considers it their highest-pressure hose, and it's lightweight and resistant to almost everything. Speed-Flex is most commonly used for brake lines, fuel/oil gauge lines, hydraulic clutches, power steering, and fuel and oil lines. It's constructed from synthetic rubber or PTFE, with a braided stainless steel covering. Some hoses are PCV coated, as well. Your options include operating psi, size, length, and color. Order the Speed-Flex hose needed for your applications.

4.09 out of 5 stars ( 22 )

$8.57

—

$315.95

Earl's Performance Vapor Guard Submersible Hoses

Earl's Performance Vapor Guard submersible hoses are ideal for use inside fuel tanks to attach the in-tank fuel pump or pickup. Most other fuel hoses are designed to handle fuel only on the inside and can be damaged if submersed in fuel. These suffer no problem with submersion and can be used with race gas, pump gas, alcohol and ethanol-blend gasoline, biodiesel, and diesel fuel. They're available in 5/16 in. or 3/8 in. sizes and 2 ft. lengths. Dive in to the submersible world with Earl's Performance Vapor Guard submersible hoses. Features and specs: * Exceeds SAE 30R10 standards * 100 psi maximum working pressure * -40 degrees to 302 degrees F temperature range * 10 in. Hg (inch of mercury) maximum vacuum * 2.5 in. minimum bend radius * Actual O.D. sizes: 0.585 in. (5/16 in. size) / 0.625 in. (3/8 in. size)

Not Yet Reviewed

$87.15

—

$89.65

On Sale

Earl's Performance Perform-O-Flex Hose

Top racing teams depend on Earl's Perform-O-Flex hose. It features an inner liner of Temprel synthetic rubber, a partial-coverage protective sheath of stainless steel braid embedded in the liner during manufacturing, and a full-coverage outer protective sheath of high-tensile stainless steel wire braid. It can withstand an operating temperature range of -40 degrees F to +300 degrees F, and still deliver you to the winner's circle. Perform-O-Flex hose is compatible with most fuel, oil, and water; and it's available in a wide variety of AN sizes, lengths, and diameters.

5.0 out of 5 stars ( 2 )

$849.95

$122.95

—

$479.51

Earl's Performance Hyperfirm U-Spec-It Individual Brake Lines

At 80 mph, Earl's says that their Hyperfirm U-Spec-It individual brake lines reduce stopping distance by as much as 18 ft. As if that weren't a good enough reason to use Hyperfirm brake lines, they also give you a firmer pedal feel and reduce brake pulsation. The PTFE/stainless steel hose used in these assemblies is pressure-tested at 4,000 psi and is DOT-approved. More than that, though, each brake line set is individually inspected and tested before Earl's ships it. Get the stopping power you need with these Earl's Performance Hyperfirm U-Spec-It individual brake lines.

Not Yet Reviewed

$54.65

On Sale

Earl's Performance Super Stock Hose

Earl's Super Stock hose is high-quality synthetic rubber tubing, reinforced by a full-coverage interior braided fabric sheath. This superior replacement hose for original equipment applications has recently found favor with professional racing teams. Available in blue or black, Super Stock is rated at 250 psi and 250 degrees F continuous service. To prevent collapse in suction service or for very tight bends, Earl's supplies an internal spiral reinforcing wire. It's suitable for fuel, oil, and water. Order the hose size, length, and diameter needed for your applications.

4.79 out of 5 stars ( 14 )

$226.95

$7.20

—

$240.95

On Sale

Earl's Performance Swivel-Seal Hose Ends

Earl's uses aluminum alloys that meet or exceed minimum requirements for aerospace hose fittings in their Swivel-Seal hose ends. These components are precision-machined to exact tolerances for trouble-free performance. Some features include an unmatched bend design, allowing for the maximum fluid flow capacity, and aluminum retention pins, allowing for 360 degrees of adjustment after installation. The nipple-and-cutter design that Earl's uses has been aerospace-proven for more than 40 years.

4.76 out of 5 stars ( 169 )

$37.43

$14.25

—

$108.95

On Sale

Earl's Performance UltraPro Hoses

Earl's Performance UltraPro hoses go way beyond "good enough." Why would you plumb your high performance, high-powered vehicle with traditional rubber hose, even if it's steel braided? Earl's UltraPro Series of stainless steel and polyester braided hoses are designed to withstand today's modern fluids, harsh environments, brutal vibration, flow requirements, and extreme pressures. You no longer need worry about frequent replacement, deterioration from fuels, and the safety hazards of vapors and leaks. And, UltraPro hoses are much lighter, more rugged, more flexible, and offer more flow. All of this, plus great looks, peace of mind, and a price that's hard to argue with—why wouldn't you choose Earl's UltraPro hoses for performance plumbing? Features of superior Earl's UltraPro hoses: * PTFE inner liner impervious to all known fuels, oils, and coolants used in automotive applications, is carbon-infused for static dissipation, and has ultra-low coefficient of friction to promote maximum flow * Double-helix ribbed inner hose liner offers extreme flexibility and full-flow, making tough plumbing jobs a snap with fewer hard connections * Liner is reinforced with an outside glass-fiber wrap for additional strength and integrity * Polyester braid hoses are up to 67 percent lighter, and the stainless steel braid hoses are up to 37 percent lighter than traditional rubber hose with stainless steel braid * Available in popular -6, -8, -10, -12, -16, and -20 AN sizes * Available in specific lengths and bulk to meet your application needs

Not Yet Reviewed

$337.95

$31.96

—

$949.95

On Sale

Earl's Performance Ultra-Flex 650 Hose

The packaging envelopes of the modern racing car become tighter each year, leaving less room for auxiliaries such as plumbing. At the same time, it becomes more and more difficult to get the cars down to minimum weight. Earl's Performance Ultra-Flex 650 hose solves these issues. Earl's finest and lightest hose combines a woven, ultra-light KEVLAR® braid with smooth-bore PTFE tubing for increased flow and convoluted outside for incredible flexibility. It also has significantly higher flow and pressure ratings than conventional convoluted PTFE hose. Earl's Performance Ultra-Flex 650 hose is 60 percent lighter than their stainless braid-protected synthetic rubber hose. You have spent a lot of time, energy, and money on your race engine, and you should bring life-sustaining fluid to it with the best hose on the market today--Earl's Performance Ultra-Flex 650 hose.

Not Yet Reviewed

$226.95

$38.37

—

$767.95

Earl's Performance Ultra-Flex 660 Hose

Earl's Performance Ultra-Flex 660 hose uses the same inner tubing as Earl's KEVLAR®-covered Ultra-Flex 650 hose, but it is covered with high tensile strength 304 stainless steel braid. You get the same flow rate and flexibility advantages as their KEVLAR®-covered hose, but with additional protection. The carbon-lined inner tubing (for static dissipation) is smooth bore with a large ID for maximum flow; the convoluted exterior provides incredible flexibility. Ultra-Flex 660 hose is 40 percent lighter and has an average ID 14 percent larger than Earl's premium stainless braided rubber hose. Additional features of Earl's Performance Ultra-Flex 660 hose include: * Inner tubing made of PTFE for a large range of applications including fuel (including exotics and E-based), oil, water, methanol, and air * Very high vacuum rating of – 29Hg * Remains flexible at temperatures between -94 degrees F and +510 degrees F * Clean and fast flowing * Sold by the foot * Accepts the same hose ends and crimp collars made for KEVLAR® Ultra-Flex 660 hose—using the same crimper and dies Note: For use with Earl's Ultra-Flex crimp-style hose ends only. No other Earl's hose ends are intended for use with this hose. The use of other manufacturers' hose ends is not recommended and may compromise the pressure capabilities and durability of the hose.

Not Yet Reviewed

$286.95

—

$511.95

Earl's Performance Vapor Guard Hose Clamps

Don't pass out from fuel vapors! Earl's Performance Vapor Guard hose clamps allow you to easily assemble your hose to hose ends. They are available in single and dual-ear crimp-style and screw-style stainless steel hose clamps, in many popular sizes for a secure assembly. Pair them with your Earl's Vapor Guard hoses for a long-lasting hose solution.

4.72 out of 5 stars ( 61 )

$9.98

—

$13.00

Earl's Performance Hose Barb to AN Adapters

Earl's Performance hose barb to AN adapters feature lightweight 2024 aluminum construction. They facilitate an easy transition from traditional rubber hose to AN plumbing. Earl's adapters have a durable black anodized finish and can be used for many plumbing situations, as well as custom applications. They're available in a variety of sizes and male/female connection options.

4.67 out of 5 stars ( 3 )

$15.31

—

$17.20

On Sale

Earl's Performance Hose Barb to Pipe Thread Adapters

Over the past half-century, Earl's Performance has designed and manufactured a wide variety of special adapter fittings to meet the needs of the racing industry. These hose barb to pipe thread adapters are no exception. Each one is precision-machined to exacting tolerances from lightweight aluminum for trouble-free performance, and features a bright blue or black anodized finish for good looks and corrosion resistance. They're available in a variety of sizes, angles, and attachment styles.

4.68 out of 5 stars ( 22 )

$41.96

$10.00

—

$97.35

On Sale

Earl's Performance Super Stock Hose Ends

Earl's Super Stock hose ends are push-on type direct replacements for the popular brass push-lock type hose ends. These attractive, lightweight fittings are machined from aluminum alloy and feature a durable anodized finish. They are designed for use with Earl's Super Stock hoses, they are reusable, and they are available in all common configurations. Popular, economical, and good looking; shouldn't you be using Earl's Super Stock hose ends. Crimp-on sleeves are sold separate.

4.8 out of 5 stars ( 25 )

$47.10

$10.19

—

$51.19

On Sale

Earl's Performance Single Banjo Hose Ends

Earl's Performance single banjo hose ends are perfect for upgrading carburetion fuel systems. They include the banjo bolt and seals. Replacement banjo bolts are also available.

4.08 out of 5 stars ( 13 )

$43.68

$24.62

—

$44.77

On Sale

Earl's Performance AN to NPT Adapter Fittings

Earl's Performance adapters are available in anodized aluminum and zinc plated steel. Precision-machined to exacting tolerances for trouble-free performance, they allow you to connect AN and NPT fittings together quickly and easily.

4.87 out of 5 stars ( 141 )

$66.55

$4.25

—

$47.74