Availability
Allow for the instant disconnection and reconnection of fuel, lubricant, and hydraulic lines with virtually no spillage with these Earl's Performance quick-disconnect fittings. Flow restriction is minimal and Buna seals are compatible with most fuels and lubricants.
( 21 )
$62.45
—
$66.59
On Sale
Earl's Performance offers a complete line of power steering adapter fittings to accommodate a variety of thread sizes to plumb your pump. Earl's offers the most complete line of adapter fittings in the industry.
( 24 )
$84.25
Earl's bulkhead adapter fittings provide an easy way to securely connect your lines together through firewalls, panels, etc. They are available in aluminum or steel, and in a variety of sizes, configurations, and finishes.
( 31 )
$56.19
—
$73.25
Earl's Performance quick-connect fuel rail adapter fittings are a slick, easy way to use AN plumbing with late model OE fuel rails and fuel lines. Each quick-connect features two reusable metal retainers that won't break or melt. The secondary retaining clip is attached to the fitting on a tether chain. These fittings are available in a variety of sizes, materials, finishes, and attachment styles. Product features: * One-hand "click" connection to OE line * Metal internal and external retainer provides a reliable and reusable fuel connection that cannot snap loose or melt like some plastic retainers * O-ring material developed specifically for the same application on factory vehicles to tolerate today's fuel additives and E85 * Tether chain keeps secondary retainer clip attached to the adapter, so it's always handy (installed retainer can also be safety wired to adapter for additional safety) * Fits most vehicles with 3/8 in. fuel rail and SAE standard connection
( 4 )
$99.95
On Sale
Earl's Performance AN to straight cut O-ring fittings allow you to plumb from an AN line to a fitting that uses an O-ring seal. They are manufactured from high-quality aluminum and are anodized for protection against corrosion. Earl's Performance AN to straight cut O-ring fittings are available in different configurations and styles, so you can use them throughout your vehicle.
( 60 )
$56.19
—
$73.25
Earl's steel-braided, PTFE Speed-Flex hose and line take special Speed-Seal hose fittings and adapters like these tee adapters. They are offered in aluminum, steel, and stainless steel. Aluminum adapters are not recommended for use in braking systems.
( 3 )
$87.45
Earl's Performance clutch adapter fittings convert OEM master cylinders, clutch release bearings, and slave cylinders to accept a better replacement for your less-than-perfect OEM plastic hose. These quick-disconnect fittings work perfectly with Earl's Speed Flex hose (not included). They're made from 304 stainless steel or aluminum and include EPDM O-rings. The adapter fittings are offered in several early and late model vehicle styles, straight and 90 degree angle. Check your OEM hose for the proper fit.
( 28 )
$59.95
On Sale
If you have plumbing in your race car, chances are you'll need to use some of these tee adapters to make it function and route properly. Fortunately, we have them in a variety of styles and sizes for most any situation.
( 23 )
$53.25
—
$66.59
Earl's Performance carburetor inlet fittings are made from aluminum with an anodized finish--or stainless steel with a natural finish. They're available in a variety of sizes and attachment styles. Order the model best suited for fitment on your carb application.
( 68 )
$53.49
Earl's Performance transmission cooler line adapters make your plumb job easier. Integrating into the transmission and adapting to AN lines allows additional tunnel clearance and freedom that the original hard lines cannot. These adapters are available for many plumbing situations and custom applications. They're machined from high-quality materials, including nickel plated steel or billet aluminum with a black anodized finish, and have high-pressure capabilities. Order the adapter size and configuration needed for your application.
( 33 )
$65.39
—
$70.79
On Sale
Over the past half-century, Earl's Performance has designed and manufactured a wide variety of special adapter fittings to meet the needs of the racing industry. These hose barb to pipe thread adapters are no exception. Each one is precision-machined to exacting tolerances from lightweight aluminum for trouble-free performance, and features a bright blue or black anodized finish for good looks and corrosion resistance. They're available in a variety of sizes, angles, and attachment styles.
( 23 )
$59.89
On Sale
Earl's makes such a wide variety of couplers, we can't imagine a plumbing job that you couldn't use them on. The couplers are available for male-to-male, female-to-female, and male-to-female thread in AN and NPT versions. Earl's even makes swivel-to-swivel couplers, to make routing line a snap.
( 212 )
$53.25
—
$87.95
Earl's Performance Y-fittings are lightweight, yet hard as nails to plumb any situation, and last a lot longer. Precision-made, Earl's Y-distribution blocks are of military spec type III hard anodized construction, making them long-wearing and corrosion-resistant. They also add aggressive appeal to any of your plumbing projects. To build the perfect fluid transfer system for your ride, choose Earl's Performance Y-fittings.
( 2 )
$53.25
—
$79.95
Earl's Performance power steering hoses are triple-steel and fabric braid-reinforced high-pressure hoses. They were developed specifically to meet the demands of power steering systems. These flexible hoses are also suitable for hydraulic and air lines, and come with a blue or black fabric outer covering. When used with Earl's power steering hose ends, Earl's power steering hose is rated for up to 2,250 psi operating pressures. The use of other manufacturer's hose ends is not recommended.
( 28 )
$90.39
—
$94.95
On Sale
Earl's uses aluminum alloys that meet or exceed minimum requirements for aerospace hose fittings in their Swivel-Seal hose ends. These components are precision-machined to exact tolerances for trouble-free performance. Some features include an unmatched bend design, allowing for the maximum fluid flow capacity, and aluminum retention pins, allowing for 360 degrees of adjustment after installation. The nipple-and-cutter design that Earl's uses has been aerospace-proven for more than 40 years.
( 167 )
$53.25
—
$106.95
The fuel additives used in today's vehicles can cause your conventional rubber hoses to breakdown over time. Earl's Performance EFI Vapor Guard hoses are a unique, 3-layer barrier to fuel penetration. Vapor Guard's secret is in its layers. The innermost primary barrier layer offers high resistance to heat and aggressive fuels. The middle barrier is a thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose. The exterior over-barrier provides extreme tolerance to heat and ozone, giving Vapor Guard hoses a 3-way shield against hose deterioration. Make sure that your vehicles get the fuel they need to get you where you need to go.
( 34 )
$78.65
—
$78.99
Due to extreme pressure spikes at the end of steering travel, power steering hose requirements are among the toughest in the industry. These steel power steering hose ends from Earl's have been developed specifically to meet these requirements. They're available in a variety of sizes to suit your needs.
( 66 )
$56.19
—
$66.59
On Sale
The original GM brazed vent tube manifold does not take into consideration the aftermarket intakes and accessories we put on our performance vehicles. Replace the rigid hard lines with Earl's Performance LS steam vent adapters. These adjustable outlets are O-ring seal adapters designed to convert to -3 or -4 AN plumbing. Earl's steam tube adapters are the most adjustable and lowest profile available. These adapters look as nice as they are installation-friendly. There are several kits available to allow for the optimal routing on your application, including dual outlet options, which eliminate the need for a Tee adapter.
( 18 )
$64.98
—
$76.45
On Sale
Earl's Performance Swivel-Seal coupler hose ends allow you to connect a hose directly to a female-threaded port without the use of an adapter. The threaded male coupler can be rotated independently of the hose end portion of the fitting. That allows you to thread the coupler into the port without moving the hose end and hose. The Swivel-Seal coupler hose ends are available with NPT and AN-threaded coupler ends.
( 2 )
$65.39
On Sale
Earl's Speed-Seal hose ends are reusable and have a proven record of reliability throughout the racing industry. Because brake system hose ends are subject to wear and tear from extreme vibration, these forged hose ends have an 80 percent greater wall thickness than any other on the market. These Speed-Seal hose ends are available in stainless steel or aluminum, bent tube or low-profile, and adjustable or non-adjustable configurations. They're made for use with Speed-Flex smooth bore hoses.
( 35 )
$56.15
—
$94.95
On Sale
Earl's uses aluminum alloys that meet or exceed minimum requirements for aerospace hose ends. Each component is precision-machined to exacting tolerances for trouble-free performance. The nipple-and-cutter design that Earl's uses on their hose ends has been aerospace-proven for more than 40 years.
( 49 )
$94.95
—
$99.95
On Sale
Original Earl's Auto-Mate barbed hose ends are still the best in the industry because of their reliability and appearance. They are made out of aluminum and feature a blue finish. They come in several angles, hose end sizes, and AN sizes for just about any job. They're made for use with stainless steel braided hose.
( 7 )
$68.69
On Sale
Earl's Performance Ultra-Flex 650 hose ends have been developed by Earl's to be used in conjunction with their Ultra-Flex 650 hose. They feature a special crimp design that offers Earl's lightest alternative in plumbing a race engine. Earl's Performance Ultra-Flex 650 hose ends are manufactured from aluminum and have a Mil Spec Type III hard anodizing that is impregnated with PTFE to significantly reduce friction of the fluids running through the line assemblies. Available in different sizes and angles, these Earl's Performance Ultra-Flex 650 hose ends will get the job done.
Not Yet Reviewed
$59.95
—
$66.55
Earl's Performance Speed-Flex hose is used with the Speed-Seal reusable hose ends and can handle pressure of up to 3,000 psi. Earl's considers it their highest-pressure hose, and it's lightweight and resistant to almost everything. Speed-Flex is most commonly used for brake lines, fuel/oil gauge lines, hydraulic clutches, power steering, and fuel and oil lines. It's constructed from synthetic rubber or PTFE, with a braided stainless steel covering. Some hoses are PCV coated, as well. Your options include operating psi, size, length, and color. Order the Speed-Flex hose needed for your applications.
( 22 )
$79.99
—
$93.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
