Availability
The fuel additives used in today's vehicles can cause your conventional rubber hoses to breakdown over time. Earl's Performance EFI Vapor Guard hoses are a unique, 3-layer barrier to fuel penetration. Vapor Guard's secret is in its layers. The innermost primary barrier layer offers high resistance to heat and aggressive fuels. The middle barrier is a thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose. The exterior over-barrier provides extreme tolerance to heat and ozone, giving Vapor Guard hoses a 3-way shield against hose deterioration. Make sure that your vehicles get the fuel they need to get you where you need to go.
( 34 )
$144.95
—
$159.95
Relocate your oil filter to a more convenient, easy-to-reach location with Earl's Performance remote oil filter mounts. Offered in a selection of styles machined from either lightweight cast aluminum or billet aluminum, they are very useful in high performance vehicles where, quick access to the oil filter is desired.
( 19 )
$118.95
—
$130.95
Earl's Performance power steering hoses are triple-steel and fabric braid-reinforced high-pressure hoses. They were developed specifically to meet the demands of power steering systems. These flexible hoses are also suitable for hydraulic and air lines, and come with a blue or black fabric outer covering. When used with Earl's power steering hose ends, Earl's power steering hose is rated for up to 2,250 psi operating pressures. The use of other manufacturer's hose ends is not recommended.
( 27 )
$142.95
—
$149.95
Earl's Performance UltraPro ball valves are ideal for all racing applications and provide full uninterrupted flow when opened. The lightweight modular design is easy to rebuild; and the glass-reinforced PTFE seals are compatible with gasoline, racing fuels, methanol, alcohol, E85, oil, water, and coolant. The small body valves are available in -6 and -8 AN sizes; and the large body valves are available in -10 and -12 AN sizes (choose from male/male, or male/female styles). UltraPro ball valves feature an attractive clear and black anodized finish with red handle, a 1/4 in. hole for cable operation—and are curved outward from the body for easy operation (with extra finger clearance, even for drivers wearing racing gloves). These racing ball valves are ideal for use in most fuel and oil systems (i.e. fuel shut-off valves, oil accumulators/accusump systems, and many other applications).
( 23 )
$165.95
—
$209.95
These Earl's Performance shut-off valves are ideal for use as emergency fuel shutoffs, drain valves, or even as anti-theft devices. They have a lever design, which makes them quick and easy to use.
( 38 )
$165.95
—
$209.95
On Sale
Tired of running to your toolbox multiple times to get the proper AN wrench? Earl's Performance offers a solution with their AN adjustable wrenches. Available in a mini (-3 to -8 AN) or standard (-3 to -12 AN) size, or in a set with one of each, all wrenches are CNC machined from true aerospace grade 7075 billet aluminum and feature a precision mechanism with a steel nickel knurled thumbwheel. The quick size adjustment makes them ideal for use in the pit area, staging lanes, or back at the shop. Select the one(s) you want for your toolbox. Features: * 7075-T351 military grade aluminum for maximum durability and minimum weight * Mini wrench weighs only 6.5 oz. * Standard wrench weighs only 7.2 oz. * Anodized black finish * Curved lower jaw and chamfered nose for clearance in tight spots * A spring and copper washer inside adjustment wheel maintain correct torque and tension to close any remaining gaps * Handles have chamfered edges that fit comfortably in your hand
( 13 )
$144.95
Surplus units were widely used in fuel systems for decades. However, the surplus synthetic rubber seals are not always compatible with current hydrocarbon fuels and/or additives. Earl's has redesigned the original surplus valves with modern elastomers, which are not affected by most fuels and lubricants.
( 8 )
$127.95
—
$178.95
Earl's Performance annealed stainless steel tubing will assist you in creating precision hardline systems. The straight lengths of 304 stainless steel are easily formed with tools and can be flared. Plus, they can be polished for a custom look. Earl's tubing is available in several diameters and lengths to fulfill your application needs.
( 11 )
$108.95
—
$127.95
Earl's Performance billet fuel logs are compatible with pump gas, race gas, and E85. Crafted from billet aluminum and black anodized, these feed lines are designed for use with most dual inlet Holley carburetors with 7/8 in.-20 threads on the fuel bowls. The bowl extension adapters pivot at the fuel log end to provide extra-clearance and easier assembly. Features and benefits: * Adjustable billet aluminum fuel log—8 1/2 in. to 11 3/4 in. * Swivel extensions allow adjustment and easier assembly * Fuel log inlets and outlets: -10 AN O-ring female on each end * Fuel inlet fitting: -8 AN male to -10 AN O-ring port * Fuel log outlet: -10 O-ring port plug * Plug can be removed for use with return-style fuel pressure regulator * Two 1/8 in. NPT ports for fuel pressure gauge * Fits Holley 4150, 4160, and 4500 carburetors * Adapters, O-rings, plugs, and sealing washers for the fuel bowls are included
( 7 )
$178.95
Many installations, particularly oil cooler installations, require the oil filter to be relocated. Earl's has bypass adapters for most spin-on and many bolt-on applications. They're designed to be quick and easy to install.
( 13 )
$119.95
—
$127.95
On Sale
These high-temperature elastomeric auto-flex hoses are ideal for almost all street and marine applications, and many non-critical competition uses. These high-quality hoses have a nice looking stainless braided outer cover that protects the synthetic rubber inner liner, allowing continuous operating temperatures of -40 degrees to 300 degrees F. These auto-flex hoses are good for fuel, oil, water, and many other fluids.
( 30 )
$349.95
$105.95
—
$213.95
To ensure quick warm up under cold weather conditions, use an Earl's Performance oil thermostat. These uniquely designed products control oil temperature like a thermostat controls water temperature in your cooling system. Designed for use with engine oil coolers.
( 10 )
$189.95
Earl's Performance conical seals are designed for immediate and permanent field repairs for damaged 37 degree flare hose ends. They are made of aluminum and install by simply pushing the conical seat on and assembling the hose end in a normal manner.
( 42 )
$119.95
On Sale
Earl's Performance oil cooler adapters replace the OEM oil filter housing. These oil filter bypass adapters allow for the installation of a remote oil filter and optional oil cooler. Their billet construction is black anodized and stainless hardware is included. They use O-ring seals for a leak-free installation.
( 15 )
$154.95
—
$199.95
On Sale
Earl's Performance inline fuel filters are designed for use as pre-filters to provide maximum protection for fuel systems. They're available with your choice of an 85 micron screen-type element or a 35 micron sintered bronze element. Either style can be easily disassembled for inspection and cleaning. The filter housings are available in a wide range of male AN fitting sizes for use with Earl's high performance fuel lines and fittings. Also available with hose barb ends (bronze element only), they have a fuel flow of 4 to 5 gpm and come with an anodized finish in a choice of colors. Replacement sintered bronze filter elements also sold separately.
( 100 )
$105.95
—
$159.95
The factory oil filter location on the Gen III Hemi may interfere with the crossmember or suspension in some engine swaps. Earl's Performance oil filter relocation kits allow the oil filter to be moved to a remote location, making them ideal for engine swaps where extra clearance is needed. Everything needed to move the filter is included: Block-off adapter, adapter fittings, push-on hose, hose ends, and the remote filter adapter. The block-off adapter features aluminum construction with an attractive, corrosion-resistant black anodized finish and screws on in place of the oil filter. The Gen III Hemi block has two 3/8 in. NPT ports located near the filter allow installation of the AN hoses for plumbing the remote filter.
( 1 )
$199.95
—
$212.95
Earl's Performance cylinder headbolt kits are made from premium quality 170,000 psi chromoly alloy steel (about 15 percent stronger than Grade 8). These headbolts are reusable and are the ideal way to upgrade the performance of your engine, and eliminate the hassle and cost of replacing OEM-style torque-to-yield style bolts each time the cylinder heads are removed. Order the kit recommended for your year, make, and engine application. Features include: * Material—chromoly alloy steel * Yield strength—170,000 psi * Finish—black oxide * Reduced wrenching size—provides extra socket clearance * Choose from 12-point or hex head-styles * Wide flanged head provides more support for the extra-thick chromoly washers * Includes premium headbolts, washers, and anti-seize lubricant * Sold in complete engine sets * Reusable headbolts and washers (not torque-to-yield)
( 8 )
$127.95
—
$230.95
On Sale
Earl's Late Model USCAR fuel pump module mounting rings allow the use of a modern in-tank EFI fuel module in your custom or modified fuel tank. The rings are designed to work with most fuel pump modules that have a 6 in. diameter hat. They are available in 6061 aluminum, mild steel, and 304 stainless steel—choose the same material as your fuel tank for easier welding.
( 1 )
$149.95
—
$154.95
Available in both dedicated and universal styles, these swivel-seal fuel lines from Earl's Performance will solve the fuel delivery problems for anybody using dual-feed Holley carburetors. Dozens of fitment and material options are available, including various fuel line and braided flex line construction choices. The AN and NPT fittings are made from aluminum with an anodized finish for durability. These swivel-seal fuel lines couldn't be any easier to install. Order the part that matches your carburetor specs and keep the fuel flowing efficiently.
( 33 )
$173.95
—
$249.95
On Sale
Earl's Super Stock hose is high-quality synthetic rubber tubing, reinforced by a full-coverage interior braided fabric sheath. This superior replacement hose for original equipment applications has recently found favor with professional racing teams. Available in blue or black, Super Stock is rated at 250 psi and 250 degrees F continuous service. To prevent collapse in suction service or for very tight bends, Earl's supplies an internal spiral reinforcing wire. It's suitable for fuel, oil, and water. Order the hose size, length, and diameter needed for your applications.
( 14 )
$226.95
$113.95
—
$235.95
Earl's Performance Pro-Lite Ultra hose is the premier choice for your hot rod or race car. It features advanced designs that make the hose ideal for high-pressure applications up to 500 psi. Their inner tube of oil-resistant "PKR" synthetic rubber won't degrade or leak when exposed to most fluids, and it's reinforced with a stainless steel braid that greatly increases the hoop strength—keeping the hose from bulging or separating from its fittings. Finally, the braided nylon fiber cover is resistant to oil, abrasion, and extreme weather, keeping Pro-Lite Ultra hose looking great and functioning the way it's meant to.
( 3 )
$113.95
—
$226.95
Make your own custom tubing with Earl's Performance Make your own custom tubing with Earl's Performance Professional lever-style tubing benders. These high-quality tools can handle all types of tubing, including harder materials. Simply slip over your tube at any point to make smooth, tight radius bends without scoring or flattening. The tools are calibrated with angles up to 180 degrees and will work with steel, copper, and copper/nickel, as well as stainless steel. Earl's Performance Professional lever-style tubing benders are available individually and each bends one tubing size.
( 3 )
$165.95
—
$173.95
On Sale
Earl's Performance UltraPro hoses go way beyond "good enough." Why would you plumb your high performance, high-powered vehicle with traditional rubber hose, even if it's steel braided? Earl's UltraPro Series of stainless steel and polyester braided hoses are designed to withstand today's modern fluids, harsh environments, brutal vibration, flow requirements, and extreme pressures. You no longer need worry about frequent replacement, deterioration from fuels, and the safety hazards of vapors and leaks. And, UltraPro hoses are much lighter, more rugged, more flexible, and offer more flow. All of this, plus great looks, peace of mind, and a price that's hard to argue with—why wouldn't you choose Earl's UltraPro hoses for performance plumbing? Features of superior Earl's UltraPro hoses: * PTFE inner liner impervious to all known fuels, oils, and coolants used in automotive applications, is carbon-infused for static dissipation, and has ultra-low coefficient of friction to promote maximum flow * Double-helix ribbed inner hose liner offers extreme flexibility and full-flow, making tough plumbing jobs a snap with fewer hard connections * Liner is reinforced with an outside glass-fiber wrap for additional strength and integrity * Polyester braid hoses are up to 67 percent lighter, and the stainless steel braid hoses are up to 37 percent lighter than traditional rubber hose with stainless steel braid * Available in popular -6, -8, -10, -12, -16, and -20 AN sizes * Available in specific lengths and bulk to meet your application needs
Not Yet Reviewed
$337.95
$175.95
—
$249.95
Earl's Performance Speed-Flex hose is used with the Speed-Seal reusable hose ends and can handle pressure of up to 3,000 psi. Earl's considers it their highest-pressure hose, and it's lightweight and resistant to almost everything. Speed-Flex is most commonly used for brake lines, fuel/oil gauge lines, hydraulic clutches, power steering, and fuel and oil lines. It's constructed from synthetic rubber or PTFE, with a braided stainless steel covering. Some hoses are PCV coated, as well. Your options include operating psi, size, length, and color. Order the Speed-Flex hose needed for your applications.
( 22 )
$119.95
—
$240.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
