Availability
Dinan high-flow air intake systems consist of an injection-molded replacement lid for the stock air box—designed to increase overall volume and accommodate a high-flow filter element for optimum intake airflow. The lid is manufactured using a special composite material, specifically chosen for its ability to resist power-robbing underhood heat. The lid also incorporates an O-ring, completely sealing the air box for maximum pressurization and further insulation against heat-soaking—optimizing performance under varying driving conditions. They also include a secondary intake duct that scoops up additional cool, oxygen-rich air via the factory brake cooling duct, further improving performance as road speed increases.
Not Yet Reviewed
$1,699.95
Dinan carbon fiber air intake systems force-feed the engine with greater volumes of cool, oxygen-rich air for substantial power gains. These kits are so effective that the carbon fiber inlet air temperature is a full 40 degrees F cooler than the incoming air from the stock inlet. Due to the increased airflow, the power-curve is extended into the higher rpm for a noticeable change. Dinan carbon fiber air intake systems are direct replacements for the factory air box lid. They employ a hand-crafted carbon fiber unit--including a secondary carbon fiber intake tube that captures cool air from the lower grill. Shielding is provided for the conical filter to insulate it from power-robbing engine compartment heat. Order the model designed for your vehicle and engine application.
( 4 )
$999.95
—
$2,399.95
Dinan carbon fiber G8x strut tower braces provide additional rigidity and sharper handling to the chassis by reducing flex under hard cornering conditions. With more control, spirited driving becomes easier and infinitely more enjoyable. The lightweight braces are designed with maximum function in mind—and include linking structural elements that completely change the OEM 2-piece strut bar set into one blended system that offers additional strengthening against flex. Not one to take a back seat to functionality, aesthetics are also elevated beyond simple steel bars into striking carbon fiber (matte or gloss) with accents that tie in effortlessly into the highly geometric and angular factory engine bay for an OEM+ feel. The imposing carbon fiber braces can be installed in a matter of minutes and used in conjunction with either the stock or Dinan intake systems. While the braces were designed to specifically tie into the latter for a harmoniously balanced and unified appearance, they can also stand on their own and elicit nearly as equally an impressive visual. Product details:: * Improved chassis rigidity * Decreased flex during cornering * Lightweight: 5.6 lbs. lighter than stock (Dinan carbon fiber: 2.8 lbs. vs. OEM steel: 8.4 lbs.) * 2x2 twill carbon fiber with inset aluminum mounting points for increased strength and improved visual appeal * Designed to mesh seamlessly with the Dinan cold air intake, creating an aesthetically unified engine bay * Bolt-on installation using factory mounting hardware
Not Yet Reviewed
$1,099.95
On Sale
Dinan offers a wide range of exhaust upgrades for imports like BMW, Audi, and Volkswagen. Their free flow stainless exhaust systems are precision-engineered for optimum power gains—with a civilized, sporty exhaust note that's appropriately aggressive at wide-open throttle. Plus, there's no irritating low-rpm "drone" that is common with so many other aftermarket mufflers. These free flow systems are manufactured from stainless steel, inside and out, for maximum resistance to corrosion and reduced weight (by 30 percent). They utilize the OE brackets and hangers for mounting in factory-like fashion. Order the Dinan free flow stainless exhaust system designed for your vehicle application.
( 4 )
$2,499.95
$584.95
—
$2,699.95
Dinan high-flow mid-pipes upgrade the sound and enjoyment of your BMW. These pipes allow for an aggressive tone to be achieved from your stock system. Coupled with the associated Dinan exhaust, the sound is further perfected into an aggressive growl that's hard to ignore. This full mid-section removes the factory center section, including both resonators, and replaces it with straight-through T304 stainless steel tubing for better flow and sound—while also reducing the weight by 3 lbs. Order the kit designed for fitment on your vehicle model.
Not Yet Reviewed
$649.95
—
$849.95
Add a splash of style and a dash of downforce with Dinan's carbon fiber rear deck spoilers. A quintessential aesthetic modification for any high performance track or show build, these spoilers exude sophistication and purpose—two qualities synonymous with the Dinan brand. Order the model recommended for your specific application.
Not Yet Reviewed
$359.95
—
$549.95
On Sale
Dinan BMW engine covers adds aesthetic charm to your humble engine bay. The massive, detail laden, UV coated 2 x 2 carbon fiber lid inhabits the same footprint as its factory counterpart but flairs outward at its sides to inhibit the view of some of the unsightly stainless steel hardware underneath. With the goal of having the engine bay as clutter free as possible, Dinan engine covers are devoid of distracting mounting hardware. Instead, powerful rare earth magnets are utilized, resulting in not only an incredibly clean installation, but also one that takes no time or effort to mount. As a bonus, already straightforward filter changes are made even easier and expeditiously. Give your underhood visuals an upgrade with the bold statement of Dinan carbon fiber engine covers.
Not Yet Reviewed
$799.95
$302.95
—
$699.95
Dinan high-flow X-pipes delivers a deeper tone and a more aggressive note, along with a noticeable increase in volume. Coupled with the associated Dinan exhaust, the sound is further perfected into an aggressive growl that harkens back to the Dinan E9x M3 racing middle exhaust. Rightly so as the same custom X that was used in that application is implemented on the new F8x chassis for that perfect mix of exotic undertones and raw aggression. Unlike a stamped X-pipe that is so common in the marketplace, the Dinan "X" pipes are thoughtfully designed for maximum flow characteristics and by themselves are works of art. Dinan X-pipes remove the factory center section after the secondary catalytic converters, including the large resonator. In its place you will have straight-through mandrel-bent 2.75 in. T304 stainless steel tubing and the custom "X" for better flow, and an improved throaty sound. kits come complete with mounting hardware, OE-quality clamps, and flanges for simplified installation.
Not Yet Reviewed
$549.95
—
$1,499.95
Dinan front lips make the nose of your vehicle even more sporty and aggressive. They take the existing pronounced body lines from the factory and embellishes them even further for a competition inspired OEM-plus look. Unlike more elaborate multi-piece front lips on the market, the Dinan carbon fiber lip is a single piece with a slightly raised center ensuring only minor additional care is needed to navigate inclines or speed bumps. This allows daily drivability to be largely unaffected and the improved look to be enjoyed free of worry. Dinan front lips are made of 2x2 gloss twill carbon fiber manufactured to be impact-resistant, durable, and strong. They have a clearcoat for maximum UV protection and fade resistance, and they include 3M double sided tape and mounting screws for easy installation with a clean fit and finish.
Not Yet Reviewed
$1,399.95
On Sale
Dinan valved exhaust systems are available in cat-back and rear axle back options for a variety of Toyota applications. These exhausts convey the sweet sounds of a deep, rich, euphonious note that are unmistakably Dinan; in addition to retaining the flexibility of valves, Dinan exhausts are the epitome of sound without sacrifice. Utilizing factory cut points and mounting mechanics, Dinan exhaust systems are a straightforward install with precision fitment, just like you'd expect straight from the manufacturer. Mounting and proper fitment is where the similarities to the factory exhaust end, however. Fabricated from brushed 100 percent T304 stainless steel, TIG-welded and free of hydroformed pipe, each upgraded system is a marked improvement from its predecessor—both in terms of material/construction and overall looks. For weight savings and simplicity, the stock single-to-dual pipe setup has been abandoned in favor of an enlarged, free-flowing single pipe system. This pathway feeds into a muffler that limits frequencies associated with drone, as well as assists in altering the overall tone of the setup to deliver the signature low Dinan rumble. The no-nonsense design allows shocking versatility in sound levels when paired with features, like valves, often associated with more fanciful alternatives. The unabashedly spartan, yet effective, pipe layout forces gasses to escape from the rear out of massive dual, straight cut, 114.3mm (4.5 in.) exhaust tips emblazoned with the laser-engraved Dinan logo. The tip branding further cements any lingering doubt that the system visible is something above and beyond stock. Unquestionable enhancements to the overall chorus emitted through the Dinan system transcend all modes, making the vehicle a delight to drive and enjoy. However, for those who want options to limit the extraordinary soundtrack for late night or early morning arrivals/departures (or any number of other reasons), factory valve control is retained. This effectively makes the system behave similarly to a straight-pipe system that promotes maximum flow and volume when the valve is open—and emit more subdued resonant vocals when the valve is closed; and exhaust gases are wholly redirected through the muffler. It's the perfect blend of civility when not pushing the car or the full spectrum of auditory delight when in it. No matter the situation, Dinan valved exhaust systems are the answer for discerning enthusiasts looking for sound without sacrifice. Additional product features: * Maximum gains of +6 HP and +5 lbs.-ft. of torque * Enjoyably louder, sportier sound * Drone abatement technologies used to reduce cabin resonance * Dual 4.5 in. (114.3mm) double-walled clamp-on tips with laser-engraved Dinan logo * Larger diameter piping for increased flow (83mm throughout primary run vs. 80mm at largest point) * 100 percent 304 stainless steel construction * Retains factory valve control * Factory-like fitment with included mounting hardware * Tips available with polished or black ceramic coated finish
Not Yet Reviewed
$1,599.95
—
$2,199.95
Invoking the feeling of motion, Dinan side skirts take the factory runners and add a touch of sophistication and class resulting in an OEM-plus feel. Together, when matched with the Dinan front lip and rear diffuser (not included) they create a continuous and fluid carbon fiber cosmetic solution around the entirety of the vehicle. The rear flare of each side skirt includes a "ghosted" Dinan egg logo. Dinan front lips are made of 2x2 gloss twill carbon fiber manufactured to be impact-resistant, durable, and strong. They have a clearcoat for maximum UV protection and fade resistance, and they include 3M double sided tape and mounting screws for easy installation with a clean fit and finish.
Not Yet Reviewed
$749.95
—
$1,899.95
Reducing unsprung weight and improving your BMW's grip on the road is what the Dinan Forgeline SE1 Performance wheel sets are all about. They are built to Dinan offsets and sizes to accommodate substantially larger tires without any rubbing or modification of the wheel well. Each wheel is cut from a single solid block of aluminum creating a very strong wheel that is also light in weight. Add to these features the slender spokes of a Motorsport-inspired design gracing each wheel, and you have a winner all the way around. Features and benefits: * Wheels accommodate substantially larger tires for maximum grip and reduction of understeer by bringing the front and rear tire sizes closer together * Aerospace-grade 6061 T-6 forged aluminum for high strength-to-weight ratio * Extreme stiffness and fatigue strength * OE TPMS and lug hardware compatible for ease of installation * Dinan center caps
Not Yet Reviewed
$8,699.95
On Sale
Dinan lightweight tubular anti-roll bars reduce body roll, improve road grip, and add stability—all while saving weight, as well. They're available in front and rear sway bar sets, as well as individually. Bars, bushings, and brackets are included; plus, the front bars come with adjustable end links. Dinan anti-roll bars offer: * Less body roll * More mechanical grip * More stability at limit * Larger in diameter than stock bar * More choices for possible positions on bar with supplied adjustable end links * Lighter than solid anti-roll bars of comparable stiffness
Not Yet Reviewed
$369.95
$203.95
Dramatic exits come standard with Dinan's carbon fiber rear diffuser upgrades. The multi-piece diffusers spotlight the rear of the car and create a new "floor" that visually appears to make your vehicle lower and more aggressive. Despite the diffusers encompassing the exhaust exits, great care was taken to ensure enough room was supplied to accommodate large-tip exhausts, like Dinan's own. Additionally, the diffusers add wraparounds to each of the rear quarters, establishing a harmonious and uniform visual continuation with Dinan's front lip and side skirts (not included) for a perfectly matched cosmetic solution. Dinan rear diffusers feature 2x2 gloss twill carbon fiber manufactured to be impact-resistant, durable, and strong. They are clearcoated for maximum UV protection and fade resistance, and include 3M double sided tape and mounting screws for easy installation with a clean fit and finish.
Not Yet Reviewed
$749.95
Dinan strut and shock tower braces improve handling and the underhood style of your BMW. These attractive brushed aluminum and carbon fiber braces will help to maintain the structural integrity of the towers over the life of your vehicle, as well as provide sharper handling by reducing flex under harder cornering conditions. They may be installed in conjunction with any of the Dinan suspension systems or the stock components. The end brackets are machined for precise fitment over the strut tower reinforcements and powdercoated for a clean and solid installation.
Not Yet Reviewed
$499.95
Dinan resonator delete pipes upgrade the sound and enjoyment of your car with a kit that removes the resonated section of the factory exhaust for a more aggressive tone. These Dinan delete kits allow for an aggressive tone to be achieved out of your stock system. Coupled with the associated Dinan exhaust the sound is further perfected into an aggressive growl that is hard to ignore. This piece removes the factory resonated section and replaces it with straight-through 3.25 in. T304 stainless steel tubing for better flow and sound.
Not Yet Reviewed
$329.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
