Availability
Detroit Speed rag joints get your stock steering column connected. These strong, flexible replacement couplings are designed to be used with DSE 600 steering gear. They come complete with a clinch bolt. Get it together with Detroit Speed rag joints.
Not Yet Reviewed
$99.95
Detroit Speed heater delete plates are designed to bolt in the place where your factory heater was located. They are manufactured from 18-gauge steel for durability.
( 13 )
$104.95
Detroit Speed firewall fill plates are designed to smooth your firewall when installing an aftermarket air conditioning system such as Vintage Air. They smooth the passenger side firewall, while retaining the stock cowl to firewall seam. The weld-in plates are made of 18-gauge steel and have a rolled edge. The Detroit Speed firewall fill plates come complete with installation instructions.
( 2 )
$104.95
Detroit Speed hardline pressure tubes are specifically designed to route neatly around Detroit Speed power steering pumps with integral reservoirs. They feature a banjo fitting for attachment to the pump, hard tubing that routes around the reservoir, and an easy attachment for the hose at the end of the tube. Detroit Speed hardline pressure tubes have a low-profile design to give your ride a clean and neat look under the hood so that when you're done installing them, you'll keep that showroom-quality look in your engine bay.
( 1 )
$104.95
You'll be singing in the rain with OE replacement Detroit Speed Selecta Speed windshield washer pump kits. These kits are designed to work with their low-profile Selecta Speed wiper kits only. The wiper kits have a ground and power wire in the wiring harness to aid in installing the pump kits.
( 3 )
$62.95
Detroit Speed leaf spring bushings are designed to be direct replacements for your factory leaf spring bushings. They're made of high-quality polyurethane or Delrin construction to meet or exceed the performance of your original leaf spring bushings.
( 3 )
$78.95
Whether you're installing a replacement axle or reinstalling the original, you'll need Detroit Speed U-bolt kits. These kits include 4 U-bolts, 8 washers, and 8 tall nuts. Detroit Speed U-bolt kits will keep your beast rolling straight down the road.
( 9 )
$71.95
—
$89.95
Add a nice finishing touch to your classic car with Detroit Speed billet hood latch pins. These OEM update components are used to dress up a usually forgotten and neglected area of your vehicle. They're precisely machined from 304 Series stainless steel and are manufactured to factory specifications to provide an exact fit and function. Detroit Speed offers quality restoration components to suit all your needs.
Not Yet Reviewed
$63.95
Detroit Speed throttle pedal brackets are bolt-ons that mount the electronic throttle pedal to the firewall. These DSE heavy-duty brackets feature a black E-coat. Secure your classic's throttle pedal with brackets from Detroit Speed.
Not Yet Reviewed
$68.95
Detroit Speed track arm bushings are OE replacement trailing arm bushings for your 1960-72 GM C10 truck. New bushings improve the performance and handling of your C10. These high durometer rubber bushings provide an optimal balance of link rotation and pivot motion while reducing noise, vibration and harshness. They're sold in a set of (2) pieces. (NOTE: Fits 1960-72 C10 with factory truck arms and coil spring rear suspension only. These bushings also fit some 1960-72 GMC C15 trucks, but only if it had the factory optional truck arm and coil spring rear suspension.)
( 1 )
$59.95
Faulty suspension operation? The problem could lie in your shock mounts, causing the shock absorbers to malfunction. If that's the case, make an upgrade with Detroit Speed's mini-tub lower shock plates! These plates come in an electroplate finish and work great when mini-tubbing the rear of your vehicle for larger rear tires. Because mini-tub plates do not have the same bolt pattern as stock sprint plates found on most axle housings, they can be used with Detroit Speed's adjustable leaf spring pads and U-bolts (sold separately). These mini-tub lower shock plates are available in either staggered inboard, staggered outboard, or for shocks on the same side of the rear axle.
( 1 )
$54.95
Detroit Speed heavy-duty shackle kits does your suspension one better. DSE heavy-duty steel shackles are zinc plated and include bolts and locknuts. Shackles are available alone or with bushings for a complete install. DSE polyurethane bushing/shackle kits upgrade your soft rubber bushings with added strength and include both spring eye bushings and shackle bushings. Their Delrin kit offers the ultimate handling performance by reducing bushing compliance. Offset shackle kits are available as well to offset the leaf springs inboard to gain more clearance with your mini-tub kit.
Not Yet Reviewed
$68.95
Detroit Speed power steering pump brackets allow simple installation of their GM Type II power steering pump onto Chevrolet small and big block engines. DSE brackets are CNC-machined from 6061 billet aluminum and include all hardware to attach the pump and bracket to your engine. They use existing accessory-bracket mounting holes in your engine block to make installation easier. The small block bracket is designed to work with many pulley configurations and a "short-style" water pump, while the big block bracket is designed to work with a "long-style" water pump.
Not Yet Reviewed
$79.95
Detroit Speed mini-tub trunk closeout kits are complementary products to their mini-tub and QUADRALink kits. They're designed to be installed for additional exhaust clearance between your wheels and around the front of your fuel tank. These oversized closeouts can be trimmed to fit into the trunk pan and welded into place. Detroit Speed mini-tub trunk closeout kits are highly recommended when installing a 3 in. diameter exhaust system.
Not Yet Reviewed
$57.95
Detroit Speed tow hooks are designed for GM model vehicles with front or rear tow hooks. They are made of high-quality materials for long-lasting performance and durability. If you're trying to restore a classic ride or just want to be able to tow behind, these Detroit Speed tow hooks are your answer.
Not Yet Reviewed
$97.95
Detroit Speed steering shafts utilize the highest quality steel and are thoroughly tested. Similar to OEM automotive U-joints, the staked needle bearing caps prevent loosening and adjustment malfunction. Keep your vehicle steering smooth with Detroit Speed steering shafts.
( 3 )
$52.95
—
$68.95
The components that help your vehicle's steering system operate effectively are the tie rods, allowing the wheels to turn left and right, enabling steering and turning. They do wear out and will need replaced to maintain proper performance. Detroit Speed tie rod ends are reliable quality replacements built from premium materials and available in different configurations, types, and position (inner or outer), covering a range of applications. Select the Detroit tie rods designed for your vehicle.
Not Yet Reviewed
$60.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
