Availability
DEI Fire Wrap 3000 offers ideal protection against intense underhood heat, making it perfect for protecting hoses, oil and fuel lines, and electrical wiring. DEI Fire Wrap 3000 is constructed from a woven fiberglass braided sleeve that is heavily coated with 100 percent iron oxide silicone rubber. Its unique hook-and-loop design allows you to install it easily without disassembling anything. Capable of withstanding temperatures of up to 500 degrees F continuous and up to 2,000 degrees F intermittent, DEI Fire Wrap 3,000 provides excellent protection against harmful heat.
( 25 )
$52.99
For quick and easy heat shielding, use DEI Versa Shields. They are designed to protect your starter, cool can, carburetor, or electrical box from radiant heat problems. The Versa Shield is constructed using an aluminum heat reflective material backed with a hi-temp rated glass fiber insulation barrier and is capable of reflecting radiant heat up to an impressive 2,000 degrees F. Simply wrap the desired component with Versa Shield and trim excess material. Edges attach to itself using a hook-and-loop edge closure design, and can easily be removed for car shows.
( 194 )
$26.99
—
$28.99
DEI titanium exhaust wrap with LR technology is constructed from pulverized lava rock, extruded into fibers, and then woven into a tight weave, giving it titanium-like strength and toughness. The improvement in thermal protection helps to reduce underhood temperatures, resulting in cooler air intake for improved performance. And less heat in the engine bay means less chance of heat soak conditions on vital underhood components. Typical glass fiber wrap is rated at handling 1,200 degrees F of maximum direct heat, while DEI's titanium wrap, using LR technology, is capable of handling direct continuous heat up to 1,800 degrees F and radiant heat up to 2,800 degrees F. And because it's pliable, there's no need to wet the wrap when wrapping headers or pipes, as many do in order to make the wrapping process easier to manage and to get a tight wrap. Titanium wrap will not shrink, and because of its material structure, it is more resistant to temperature and vibration breakdown, abrasions, chemical and hot oil spills than glass fiber wrap. Plus, DEI titanium wrap offers a very cool carbon fiber look as an added feature!
( 254 )
$22.99
—
$44.99
DEI Heat Shroud sleeving solves the problem of heat and abrasions causing failure of lines, hoses, and wires without the need to disconnect them. Offered in two different materials, both provide high-temperature protection and the added convenience of a hook-and-loop closure design that eliminates the need of removing one end of connected wires, cables, or hoses to install. Heat Shroud with glass fiber fabric and aluminized outer facing has the versatility of fitting diameters from 0.5 in. to 2.5 in. diameter, is easy to trim to length, and reflects 90 percent of radiant heat. For more demanding applications there is DEI Heat Shroud GOLD featuring metalized polyimide lamination, bonded to a robust 20 oz. heat-treated glass fiber base (rated to 1,100 degrees F) material. It is able to reflect radiant heat up to 800 degrees F and will fit diameters from 0.5 in. to 1.25 in.
( 71 )
$31.99
—
$53.99
DEI Fire Sleeve and tape kits include their popular thermal insulator sleeving, along with a 16 in. length of Fire Tape. Fire Sleeve is constructed from a high-temperature resistant braided glass material heavily coated with 100 percent iron oxide silicone rubber. They provide the ultimate in heat insulation and protection from direct heat up to 500 degrees F. DEI kits are available with different diameters and lengths of Fire Sleeve. The Fire Tape will finish off sleeve ends when joining together creating a clean professional look. More features: * Insulates wiring, hoses, oil/brakes/transmission lines * Use for bundling and protecting hoses, electrical wiring, etc. * Withstands 2000 degrees F of intermittent heat
( 37 )
$25.99
—
$36.99
Design Engineering Fire Sleeves offer ideal protection against intense underhood heat, making them perfect for protecting hoses, oil and fuel lines, and electrical wiring. The Fire Sleeves are constructed of a woven fiberglass braided sleeve heavily coated with 100 percent iron oxide silicone rubber. They are capable of withstanding temperatures of up to 500 degrees F continuous and up to 2,000 degrees F intermittent.
( 27 )
$21.99
—
$42.99
Design Engineering Protect-A-Boots keep your plug wire boots and wires safe from header and exhaust manifold heat, lowering the risk of backfiring and engine damage. Guaranteed up to 1,200 degrees F, they fit most straight or 90-degree boots.
( 78 )
$21.99
—
$50.99
DEI's black seaming tape is ideal for using with their Black Floor and Tunnel for edge and seam sealing. The tape is made with a glass fiber scrim, high temperature adhesive, and durable black finish. Additional notes: * Hides the seams and edges for our Black Floor and Tunnel * Works great as a universal black tape * Easy to apply * Adhesive good up to 311 degrees F * Excellent abrasion resistance * Solvent resistant * .007 in. thick * Tensile strength: 175 lbs./in. * Dielectric strength: 2500 V * Adhesion to steel: 50 oz./in. * DO NOT apply directly to exhaust components
Not Yet Reviewed
$33.99
DEI has taken premier Titanium LR technology and transformed it into the best protection sleeves on the market. DEI Titanium Protect-A- Sleeves are capable of withstanding temperatures up to 1,800 degrees F direct heat and 2,500 degrees F radiant, shielding your wires, lines, and cables from damage. The sleeves are available in 4 ft. lengths. The 1/2 in. inside diameter will fit larger spark plug wires to protect them from hot exhaust manifolds and headers.
( 5 )
$30.99
—
$52.99
DEI Reflect-A-GOLD heat barrier tape is a state of the art polymer laminated glass cloth that is extremely light weight and capable of handling continual operating temperatures of 850 degrees F. Reflect-A-GOLD offers considerable weight savings over similar types of materials yet still reflects 80 percent of radiant heat. Requiring minimal clearance DEI Reflect-A-GOLD is a highly conformable material that has a pressure sensitive adhesive backing that is easy to apply and remove. Popular uses include wrapping wire bundles, fuel lines, engine covers, seat bottoms, bulk heads, and fuel cells, the possibilities are endless.
( 23 )
$35.99
—
$37.99
Wrap your lines and wires with DEI Cool Tape. It's 40 percent lighter and reflects 30 percent more heat than other tapes. It has a smooth finish and a strong adhesive backing.
( 37 )
$37.99
—
$41.99
DEI Fire Tape is a non-adhesive silicone rubber tape that is self-bonding, self-curing, and forms a permanent watertight barrier. It's ideal for use with DEI Fire Sleeves and serves as an excellent insulating alternative for vinyl tapes and wraps. Other uses include wrapping wiring harnesses, along with covering and protecting wire splices and electrical wire terminations. It withstands 500 degrees of direct continuous heat, does not harden, remains flexible, and is self-bonding and self-curing.
( 5 )
$37.99
Extreme heat can rob power and potentially damage engines, transmissions, hoses, and sensitive electrical components. DEI has introduced a revolutionary advancement in Titanium pipe shield with LR technology that greatly outperforms Mylar-backed glass fiber shields. This exhaust wrap combines the high-heat tolerance of DEI's proprietary LR fiber technology with a unique rivet-based clamp shield design to improve heat dissipation and cooling. Glass fiber shields can begin to fail at 900 degrees F, with the Mylar outer material cracking and flaking off. DEI's titanium pipe shield provides heat protection up to 1,350 degrees F. LR fiber is a two-ply material. The outer layer is made from lava rock pulverized and stranded into a proprietary, tightly woven weave for durability and strength. The inside material is made of a special high temperature-resistant fabric (89 percent silica) designed to withstand 350 degrees more heat than glass fiber. This proprietary fiber technology, combined with DEI's unique shield standoff bracket design, provides an air gap between the shield and pipe that maximizes the potential for cooling and heat dissipation. With the strategic placement of DEI titanium exhaust wrap near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks, or motorcycle pipes, radiant heat can be controlled for maximum protection and performance.
( 46 )
$51.99
—
$52.99
Use DEI asbestos-free exhaust wrap as a heat barrier to keep the engine and driving compartments cool. It also keeps wires and hoses from melting under extreme conditions and controls heat in the exhaust system for a performance boost.
( 36 )
$29.99
—
$53.99
DEI Vapor Block fuel line sleeves provide an easy, sensible, and low-cost solution to rough idling and difficult starting caused by vapor lock. Designed to greatly reduce heat in the line--keeping the fuel cooler and below boiling--the protective sleeves install hassle-free with a split design and adhesive flap; there's no need to disconnect the fuel line to install them! Simply wrap Vapor Block around the fuel line, remove the adhesive release liner, and press the adhesive-backed flap into place. Features and benefits include: * Made of glass fiber and polyester laminated to an aluminum outer layer * Offers excellent inexpensive, long-lasting thermal protection with no modifications needed * Available in different diameters
( 23 )
$22.99
DEI Heat Sheath sleeves are made from high-temperature fiberglass fabric bonded to aluminized material and then sewn into a tube. Designed to slide over wires and hoses, these sheaths can be easily shaped to fit the tightest bends. They will reflect up to 90 percent of the radiant heat and can insulate against up to 500 degrees of direct, continuous heat. They can be easily cut to length with scissors or a sharp knife and come in five popular diameters from 3/4 in. to 1 1/4 in., in 3 ft. lengths. They are also available in bulk, up to 50 ft. rolls.
( 89 )
$21.99
—
$28.99
DEI Heat Sheath GOLD sleeves will protect and keep components cool in the most demanding applications. They are manufactured from high-temperature metalized polyimide lamination, bonded to a robust 20 oz. heat-treated glass fiber base material. DEI GOLD is able to reflect radiant heat up to 800 degrees F making the sleeves perfect to keep critical lines, air intakes, and hoses cool and protected. The base glass is rated up to 1,100 degrees F.
( 6 )
$23.99
—
$35.99
DEI ONYX Series pipe shields provide two layers of exhaust thermal performance that outperforms conventional shields and looks great. The dual layers consist of an outer layer made from heat-treated glass fiber that is bonded with molten aluminum and then formed into a tight weave for durability and strength. The inner layer is made of a specially treated, high-temperature resistant fabric (89 percent silica) designed to withstand some serious exhaust heat. The outer edges are finished off with a surge stitch for durability and all hardware is stainless steel. The result of this proprietary textile technology and DEI bracket design is very good thermal performance up to 1,350 degrees F, with an eye-catching rich black finish.
( 5 )
$44.99
—
$52.99
Stainless steel locking ties from DEI are fireproof, rust-resistant, and non-magnetic. They have a melting temperature of 2,500 degrees F, making them ideal for extreme heat applications, such as securing exhaust pipes. Various options are available for the length, quantity, and color of these locking ties; most are also reusable.
( 59 )
$27.99
DEI titanium knitted exhaust shield sleeves are available in different pre-cut lengths. They have a maximum temperature rating of 1,800 degrees F (Fahrenheit) with a continuous rating of 1,382 degrees F. The sleeves are perfect for larger exhaust pipes, as they can expand up to 1.5 times their normal diameter, allowing you to install them over flanges and sensor threads. They can also be cut to length, then you simply roll the ends. Protect components and keep heat from transferring into the vehicle cabin with an assist from the DEI Titanium Knit Exhaust Shield Sleeves best suited for your application. More product features, items, and specifications include: * Ties and tool * Hi-tech carbon fiber look * Reduces temperature/vibration breakdown * Pre-wetting roll not necessary for wrapping * Extremely pliable for a tight and secure wrap * Wrap for 4 in. pipe will also fit 5 in. pipe * Wrap for 3 in. pipe will also fit 4 in. pipe * Promotes increased flow for improved performance * Resistance to abrasions and oil spills
( 2 )
$33.99
—
$35.99
Design Engineering Titanium Protect-A-Boots stop the meltdown under your hood! High horsepower creates loads of extreme heat that can put your spark plug boots, wire, and ignition system at risk. DEI Protect-A-Boots feature a unique material mined from lava rock, then stranded and woven into a tight weave that's pliable, strong, and can handle up to 1,800 degrees F. These sleeves resist most abrasions, chemicals, and contaminants. DEI Titanium Protect-A-Boots offer thermal protection for your plugs and wires.
( 67 )
$29.99
DEI EXO Series exhaust and header wraps are designed for extreme environments where traditional exhaust wraps are not able to withstand exposure to water and dirt. Their dual-layer design, a combination of glass fiber covered with a 304 grade stainless steel exoskeleton, maintains high-temperature heat protection while offering superior abrasion and impact resistance. EXO Air Gap Technology prevents direct contact of the glass fiber wrap with the hot surface, creating an insulating air barrier. In addition, the stainless steel exoskeleton locks together when overlapped, keeping the wrap tight and making installation easy.
( 2 )
$39.99
Protect-A-Wires from DEI provide thermal protection for various under-hood components, such as spark plug wires, electrical wiring, and hoses, by shielding them from extreme engine and exhaust heat that can cause cracking, hardening, or burning. Basic sleeves are made from the same fiberglass composite as Protect-A-Boots to resist high temps. Upgrade kits include materials such as silicone and titanium for even greater heat insulation. To install, simply remove the distributor boot and connector, then easily slide on your Protect-A-Wire covering over the spark plug. This tubing can also be used to wrap speedometer cables, electrical wiring, and hoses. Multiple diameters, lengths, and colors are available. Product Overview: * Durable construction, made from high-temperature resistant materials * The titanium versions are resistant to chemicals and oils, offering comprehensive protection in various engine environments * Can be used to protect a wide range of components, including spark plug wires, fuel and oil lines, and speedometer cables, and are suitable for various vehicles from street cars to Powersports and marine applications * Shields sensitive components to prevent burning, cracking, and hardening of spark plug wires, electrical wiring, and hoses caused by severe under-hood temperatures, saving on replacement costs * The sleeves are designed to easily slide over existing wires and cables * Provides a professional-looking finish under-the-hood of your vehicle
( 5 )
$47.99
DEI MA Ultra Sheaths are designed to be the ultimate protection for your cables, lines, wire, or hoses. They have a higher sustained heat capability--up to 1,100 degrees F--and are more flexible than standard foil or bonded aluminum products. These sheaths are constructed from a process that impregnates molten aluminum to the core fabric, giving them higher heat reflective properties. DEI MA Ultra Sheaths are the perfect choice for tight, high-heat applications.
( 5 )
$30.99
—
$33.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
