Availability
Denso has been an OE-supplier for decades, so you know its high-quality auto parts will fit and function like the factory intended. Denso makes spark plugs, alternators,...
Denso has been an OE-supplier for decades, so you know its high-quality auto parts will fit and function like the factory intended. Denso makes spark plugs, alternators, fuel pumps, injectors, ignition coils, sensors, and other direct replacement automotive parts. Restore lost performance and replace that old original component with OE-spec auto parts from one of the industry’s most trusted suppliers. Get your Denso auto parts from Summit Racing—shop now.
Denso has been an OE-supplier for decades, so you know its high-quality auto parts will fit and function like the factory intended. Denso makes spark plugs, alternators, fuel pumps, injectors, ignition coils, sensors, and other direct replacement automotive parts. Restore lost performance and replace that old original component with OE-spec auto parts from one of the industry’s most trusted suppliers. Get your Denso auto parts from Summit Racing—shop now.
Showing In Stock Items. Show All 14 Items.
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 93 )
$23.50
—
$547.99
Clearance
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$208.99
$49.99
—
$572.99
An electrical relay is sort of a magical device … it takes a small electrical signal and uses it to manage a much more powerful current, permitting electrical systems to be both lighter and more dependable at the same time. Denso has supplied quality relays to the OE automotive world for decades. The very same performance and dependability are available across the replacement aftermarket with First Time Fit Denso relays. Engineered to meet the most stringent automaker standards for shock resistance, arcing, and thermal protection, Denso auto relays feature the lowest return rates in the industry; that equals value for car owners and repair facilities alike. Key features and benefits of Denso relays: * Lead-free, solderless construction prevents heat shock and arcing * Controlled contact force, self-adjusting air gap increase longevity of the internal parts * Industry-standard footprint * Low heat generation * Reduced electrical loads * Built to last
( 2 )
$9.99
—
$33.99
Clearance
Denso is one of the world's leading suppliers of windshield wiper blades to original equipment manufacturers and they offer the same OEM quality and value to the automotive aftermarket. Denso designer wiper blades are available for a broad selection of the cars, trucks, and SUVs on the road today. Features and benefits of Denso designer wiper blades include: * First Time Fit quality and convenience * Unique OEM design * Graphite-coated rubber provides longer lasting blade life * Sleek, aerodynamic design * Exclusive dual high-precision rotary blade cutting technology forms the wiping edge, delivering a cleaner wipe
( 4 )
$25.99
$16.50
Denso cabin air filter elements process the air that enters the passenger compartment through the vehicle's heating and air conditioning system, increasing passenger comfort by trapping particulates, pollen, and other irritants. Replacing the cabin air filter at the recommended interval, or sooner in areas where soot or pollen are prevalent, allows the passengers to breathe cleaner, fresher air--which makes any journey more enjoyable. Denso First Time Fit replacement cabin air filters are engineered for optimal airflow and filtration with minimum air noise, meeting all OE requirements. Up to five layers of filter media are used to trap impurities down to just 0.001 microns in size. First Time Fit construction assures easy replacement, even for do-it-yourselfers. Available Denso cabin air filter element types include: * Charcoal--along with filtering out airborne contaminants, charcoal eliminates odors such as exhaust and cigarette smoke * Electrostatic—the filter media is electrostatically charged to capture ultra-fine particles including diesel carbon * Particulate--filters out pollen, dust, pollutants, and other air borne contaminants
( 6 )
$11.99
Denso air conditioning compressors are all-new units built to meet Denso's unsurpassed reputation for technological superiority. As one of the world's largest OE suppliers of A/C compressors, Denso units are specified by most major vehicle manufacturers. They're manufactured and tested to the strictest OE standards for unparalleled performance. Denso brings together everything they know as an air conditioning systems manufacturer to deliver the highest quality line of factory-new compressors available. When it comes to new compressors, you can't do better than going with a unit manufactured by the OE supplier. Denso knows these units better than anyone because they originally designed them. Hundreds of models are available—for applications from the 1980s and up. Order the model recommended for your vehicle. Additional features of Denso air conditioning compressors include: * Denso First Time Fit provides the right part and the right fit ... the first time, every time * Snap rings improve performance under extreme heat * Thrust bearings built to withstand tension and stress for maximum durability * Valves and shafts designed with lightweight aluminum alloy for added strength * OE-specified O-rings and seals compatible with both R12 and R134a refrigerants * Factory O-ring installation kits prevent leakage and ensure proper installation * PTFE surface-treated pistons for smooth, efficient operation * Lightweight aluminum alloy swash plates for added strength * Includes the proper OE specified oil
( 30 )
$333.99
—
$406.99
Clearance
Denso alternators are not only original equipment on many of the world's top production cars; they are a favorite in motorsports as well, where their light weight, high-efficiency, and durability make them the natural choice. Denso remanufactured alternators go through a grueling process; stators and rectifiers are tested to 300 V, while rotors are submitted to 600 V, to ensure reliable performance. Rotor slip rings are buffed to an 8 micron surface finish, with run out limited to 20 microns, minimizing brush wear and abrasion. Bearings are validated to OE standards and loaded with premium OE-specification lubricants. Offered in wide range of amp ratings for hundreds of specific vehicle applications, all alternators meet Denso's rigorous First Time Fit standards. Contemporary vehicles employ dozens of sophisticated electronic systems, placing heavy demands on the charging system. The alternator is no place to cut corners. Additional features of Denso remanufactured alternators include: * Meet or exceed all manufacturer standards, and provide years of reliable service * First Time Fit provides perfect mounting with no belt/pulley alignment issues * Housings re-tapped and damage-checked for heat warping, corrosion, or improper surface alignment * Voltage regulators 100 percent tested to OE standards * All hardware stripped and replated * Premium cores and precise OE-assembly benchmarks * Designed to meet grueling heat and electrical requirements * OE-quality fit and appearance * Full compatibility with sensitive electronics systems
( 42 )
$176.99
Denso ignition wire sets fit right, look right, and work perfectly. Their end caps are identical to OE and are designed to "click" into place for easy installation and a secure fit. An installer can feel and hear that a solid connection has been made, even in a difficult-to-see location. Through a patented process, the terminals are attached with an extremely strong connection ensuring the cable and boot will not separate during removal and installation. Each wire in the set is pre-cut to exact length so the wire sets are ready to install right out of the box. Denso 7 and 8mm ignition wire sets are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can withstand temperatures from -40 to 428 degrees F and pass tests covering everything from electrical properties, to shrinkage, to chemical resistance, and accelerated life testing. Features and benefits of Denso Ignition Wire Sets include: * High-temperature silicone jacket to withstand heat, cold, chemicals, and moisture * Reinforcing member for added strength and terminal retention * Silicone insulation for superior dielectric and heat performance * Conductive silicon layer on 7 and 8mm wires for high-temperature performance and EMI/RFI noise suppression * Fiberglass braid for maximum strength on 7 and 8mm wires * Carbon-impregnated fiberglass core for superior conductivity on 7 and 8mm wires * Core reinforced with KEVLAR® on smaller diameter wires * Conductive layer impregnated with Ferrite on smaller diameter wires * Wire-wound layer on smaller diameter wires to suppress EMI/RFI noise * Superior dielectric and thermal qualities * Factory-original fit, appearance, and performance * World-class chemical and oil resistance
( 10 )
$40.99
—
$42.99
Expansion valves separate the low (suction) and high (discharge) sides of an A/C system, regulating the flow of liquid refrigerant through the evaporator. Denso air conditioning expansion valves are critical components for the proper functioning of many air conditioning systems. If the calibration is incorrect, the evaporator may stop exchanging heat properly or even freeze up, which can cause expensive damage. With decades of expertise in engineering A/C components and systems for the world's automakers; look to Denso for the correct expansion valve. Additional features and benefits of Denso air conditioning expansion valves include: * Precision-built for precise refrigerant flow * Excellent reliability for better evaporator control * Consistent A/C operation * Improved operation in traffic * Reduced outlet condensation
( 2 )
$31.99
—
$37.99
Clearance
Denso air conditioning condensers are manufactured to integrate seamlessly with OE air conditioning systems. They match up to OE condensers at every benchmark. A variety of condenser styles are offered to provide the best configuration for each application. Premium aluminum construction improves reliability, resisting corrosion to avoid expensive system leaks, while the superior fin wave design offers higher heat transfer and full refrigerant condensation. Heat exchanger cores are specially designed to shed airborne material, for peak efficiency with minimal maintenance and years of trouble-free service. Additional features of Denso air conditioning condensers include: * Denso First Time Fit assures bolt-in replacement; no brackets or adapters * Zinc diffusion layer improves corrosion resistance * Unique fin design to minimize airflow blockage * High performance design reduces the required compressor power * OE-quality for unparalleled performance * Pure aluminum construction for greater durability
( 3 )
$116.99
Clearance
Denso remanufactured starters are subjected to a rigorous test and replacement routine that produces the lowest return rates in the replacement aftermarket. And every starter is exactingly bench-tested to ensure factory-original performance. Remanufactured components offer tremendous value, and by recycling valuable parts and precious raw materials, they're the environmentally responsible choice as well. Denso First Time Fit remanufactured starters are the ideal choice. Key features and benefits of Denso remanufactured starters include: * Solenoid coil 100 percent voltage tested. * All terminal bolts replated or replaced with copper to ensure a clean source of electrical current * Commutator polished, gauged, and performance tested * Housing re-tapped to OE standards and damage-checked for heat warping, corrosion, or improper surface alignment; then refinished * Pinion gear inspected and replaced as needed to meet engineering specifications * Field coil inspected and high-voltage tested * Armature cleaned and high-voltage tested to ensure reliable performance * All-new bearings, brushes, and seals * Maximum cranking torque under all conditions * Designed to start in extreme cold and hot weather conditions
( 20 )
$131.99
With engineering and production facilities all over the globe, Denso is a leading supplier to the world's automakers. That engineering leadership includes air filter technology, which is shared with the aftermarket in the full line of Denso First Time Fit replacement air filters. Denso air filter elements employ three successive layers of filtration media to trap a much wider range of particulate sizes than plain, single-layer media. Precision-molded seals eliminate bypass and ensure a factory-quality fit in the air cleaner housing, making installation a breeze. The air filter is the last line of defense against the harmful airborne abrasives that have been proven to wear out engines before their time. With OE-quality engineering and materials, Denso air filters supply peace of mind. Additional features and benefits of Denso air filter elements include: * Course layer catches large dirt and dust particles * Intermediate layer catches medium-size dirt and dust particles * Fine layer catches fine particles of dirt and dust * Easy installation with a factory-quality fit * Prevents abrasive particulate matter from entering the engine reducing engine wear * Replacing a clogged air filter can improve engine performance
( 15 )
$34.99
Denso radiators offer reliable performance even under the most demanding conditions. Manufacturers rely on their quality and innovation to remain on the leading edge of engine cooling technology. Denso's OE experience and know-how ensure Denso radiators provide unmatched performance, reliability, and fitment. Radiator performance is essential for proper engine cooling and function. Denso's radiator configurations, tanks, fin pitch, core dimensions, and materials meet OE manufacturers' rigid standards. Plastic, copper, or aluminum components--it doesn't matter. You get radiators that drop in easily without the need for adjustments, additional brackets, or modifications of any kind. Denso radiators are dependable, lightweight, and made to last. An investment in a Denso radiator will pay dividends in the long run.. Features and benefits of Denso radiators include: * First Time Fit design—precision-built to provide the right part, the right fit, the first time * Plastic tanks with aluminum or copper cores * Superior fin waves provide higher heat transfer * Available in cross-flow and down-flow configurations * Thin-tube construction assures maximum cooling efficiency
( 82 )
$137.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
