Availability
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 79 )
$32.99
—
$39.99
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 256 )
$115.99
—
$428.99
Delphi electric fuel pumps are manufactured from high-quality materials. They operate under extreme temperatures and provide your vehicle with quicker engine starts. These fuel pumps are designed to be OE replacements, though universal models are also available. Find the free flow rate, maximum pressure, inlet size, and other options needed for your application. When fuel pressure becomes a problem for your vehicle, order a new Delphi electric fuel pump to restore performance!
( 48 )
$70.99
—
$117.99
Delphi mechanical fuel pumps deliver the fuel for classic vehicles—including Chevy and Ford models from the '40s, '50s, '60s, and '70s. Manufactured to quality standards, these replacement pumps are validated, tested, and matched to the correct vehicle application. Do you need a pump for your older-model carbureted system? Delphi mechanical fuel pumps will provide the appropriate performance for your system.
( 58 )
$19.99
—
$30.99
Replace worn suspension parts to improve safety and ride comfort. Delphi control arms utilize robotic welding for consistent performance and quality. Build from materials such as steel and cast iron, the arms are available in a variety of styles—including stock, stamped, and forged. Anti-corrosion protection is applied to each part to ensure longevity. Rubber or rubber/steel bushings are included with most models. Order the OE-type replacement specified for your vehicle application.
( 13 )
$42.99
—
$216.99
Delphi offers control arm bumpers—precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles. These upper and lower position control arm bumper replacements are available in different shapes and sizes for proper fit, form, and function. For money-saving solutions for your repairs, choose quality replacement parts by Delphi. Select the model recommended for your vehicle application.
( 1 )
$7.99
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$23.99
—
$52.99
Delphi suspension stabilizer bar end links enhance your ride-quality and control. These OE replacements are built and tested to the extreme for the correct performance and long-lasting service on your vehicle. Delphi parts withstand temperatures below -40 degrees C, over 120 degrees C, and are exposed to 720 hours of salt spray. Utilizing their extensive dimensional and material analysis ensures Delphi stabilizer bar links provide the best compatibility between OE and aftermarket.
( 10 )
$4.99
—
$19.99
Delphi fuel tank sending units provide correct gas gauge readings. These sending units feature empty float height and float retention to exact OE specifications. Delphi builds them with internal springs for increased durability and enhanced stability to prevent tube chafing, and gold-filled fuel level sensors that provide improved resistance to sulfur corrosion and heat. Plus, their lower amperage draws less load on your vehicle's electrical system. With their more than 50 years of OE experience in fuel handling systems, shouldn't you trust your vehicle to the accuracy of Delphi fuel tank sending units?
( 1 )
$187.99
Delphi ignition knock sensors maximize your engine's performance--regardless of fuel quality! Their knock sensors hear various knock frequencies under many operating conditions to detect shifts and provide an accurate signal to your engine control module. The sensors meet or exceed OE requirements and reduce potential damage to your internal engine components. Knock, knock-- who's there? Engine. Engine who? Engine gonna buy me a Delphi ignition knock sensor? Listen to your engine--choose Delphi.
( 31 )
$13.99
—
$15.99
Delphi ball joints can make the difference between safely getting where you're going and a really bad day. These joints are used extensively for many OE and aftermarket steering systems. They're thoroughly tested in extreme temperatures, put through 720 hours of wicked salt spray, and driven over various terrains, ensuring top quality. Delphi ball joints use exacting dimensions and top-quality materials to ensure longevity and safety for all of your valuable cargo.
( 19 )
$12.99
—
$32.99
Delphi suspension stabilizer bar bushings are designed to assist in a smooth, quiet ride and better handling. Bushings also keep the vehicle's body from rolling as you navigate turns. These important replacement parts are manufactured from quality material to meet the same standards in fit, performance, and longevity as the original equipment. Order the bushing kit recommended for fitment on your year/make/model.
( 7 )
$6.99
—
$12.99
Delphi steering pitman arms are designed with safety and precise fitment in mind. They're tested to the extreme for OE performance at every turn, withstanding temperatures below -40 degrees C and over 120 degrees C—as well as exposure to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensure the very best compatibility between the factory and aftermarket part. These durable steel pitman arms are available for a wide range of vehicle-specific applications.
( 2 )
$49.99
Delphi replacement idler arms are direct-fit components for your steering system. They're manufactured from quality materials for strength and durability. These arms are available in a variety of configurations for fitment on specific applications.
( 2 )
$47.99
These Delphi camshaft position sensors feature a digital output design for maximum signal to noise ratio. They are not impacted by temperature changes and provide long-lasting sensor protection. These Delphi camshaft position sensors are also manufactured to meet or exceed OE requirements to ensure quality and long-lasting durability.
( 13 )
$11.99
—
$30.99
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 20 )
$20.99
—
$26.99
Delphi air charge temperature sensors offer a durable OE replacement you can rely on! Built with the latest OE technology, these sensors are a one-piece design that eliminates internal connectors and failure points for more reliable service. Delphi temperature sensors have rugged plastic shells and thermistor pre-mold subassemblies or brass. Plus, they eliminate electrical interference. Get accurate readings--replace your original equipment with Delphi air charge temperature sensors.
( 2 )
$10.99
—
$29.99
Clearance
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 17 )
$13.99
—
$25.99
Delphi rack and pinion bellows are necessary components of your steering system. These quality rubber coverings seal in lubricants, while keeping moisture and dirt out to maintain long-lasting, reliable performance of your rack and pinion. Delphi offers a variety of bellows to cover many applications.
( 3 )
$19.99
—
$20.99
Delphi vehicle speed sensors offer an accurate, clean signal input to your vehicle's ECM. Their designed digital output gives the maximum signal to noise ratio and they will maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection due to their single-element design. Delphi vehicle speed sensors provide quality materials, extended life, improved reliability, and superior drivability.
Not Yet Reviewed
$18.99
—
$22.99
Delphi ABS wheel speed sensors meet your OE requirements and those of your wallet. Delphi speed sensors provide accurate, clean signal input to your vehicle's ECM. Designed for the maximum signal to noise ratio, these ABS wheel speed sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. When it's time to replace, choose Delphi ABS wheel speed sensors for reliability and superior drivability.
( 1 )
$14.99
—
$24.99
Tie rod ends are crucial parts to your steering system, so you need to maintain them with the utmost care. Delphi's replacement steering tie rod ends are manufactured from high-quality material to meet the same standards in fit, performance, and longevity as the original equipment part. They're available in a range of applications to help maintain superb control, resulting in a safe and smooth ride. Order the Delphi parts recommended for your year/make/model for improved steering performance.
( 15 )
$12.99
—
$32.99
Limit nitrogen oxide emissions with Delphi EGR valves! Delphi EGR valves recirculate controlled amounts of inert gases into the intake system, where they mix with incoming air and lower the combustion temperature below the level at which nitrogen oxide is formed. They feature a robust design, constructed with stainless steel valves and components that provide resistance to corrosion, high temperatures, and wear. Delphi EGR valves are available with solenoid, torque motor, or direct current (DC) motor actuators to help meet your individual needs.
( 24 )
$60.99
Delphi offers knock sensors for a wide variety of vehicles and engine types, including two-stroke, alternative fuel, diesel, and flexible fuel engines. The Delphi knock sensors offer several benefits including maximizing engine performance with all fuels, to help prevent engine damage from pre-ignition knocking, and ensuring accurate signals for optimal engine operation. They also help improve fuel efficiency and reduce emissions by adjusting ignition timing to avoid knocking combustion. Delphi's ever growing portfolio of high-quality vehicle sensors are backed by their stringent OE development and product validation methods. Select the sensor designed for your application.
Not Yet Reviewed
$19.99
—
$22.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
