Availability
Dakota Digital OBD-II/CAN interfaces are designed to plug directly into your engine's diagnostic port, extracting transmission data from the OBD-II computer. They can output speed, rpm, and engine temperature. The interfaces decode the information supplied from the ECM and supply this information to the VFD3 rev. G, VHX and HDX control box instruments. * Module for use with Dakota Digital RTX, HDX, VHX, and VFD3 systems with a black control module.
( 59 )
$133.00
Dakota Digital light dimming switches are designed to enhance your digital dash by using the built-in dimming feature for nighttime driving. They feature an aluminum knob and bezel to match your gauge panel perfectly. The Dakota Digital light dimming switches work with Dakota Digital instrument systems only and will not dim other instrument clusters.
( 35 )
$38.00
With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature
( 26 )
$133.00
Dakota Digital retained accessory modules have the ability to control accessories simply by opening the door. They feature automatic headlights, an automatic dome light, battery monitoring, an override switch, and a remote door lock trigger input. The Dakota Digital retained accessory modules have four dip switches and an adjustment pot to allow the user to customize them.
( 5 )
$247.00
Dakota Digital's relays with wiring sockets are designed for use with your power and electrical accessories. These relays with sockets are available in single and dual versions.
( 50 )
$14.25
—
$38.00
Dakota Digital offers extension cables for a variety of their data acquisition systems. The cables are ideal for replacement or for added placement length. Order the model recommended for your data component.
( 3 )
$10.40
Dakota Digital rocker switches provide you with options that can be used with your Dakota Digital analog gauge control boxes. These switch assemblies can be mounted below a dash or panel, or remove switch and install through the dash for the ultimate clean installation!
( 5 )
$21.95
Dakota Digital Magnum Shooters eliminate those unsightly wires in door jambs, trunks, trailer ramps, pickup beds, and tailgates. They are spring-loaded and fully adjustable from 1/4 in. to 11/16 in. Dakota Digital Magnum Shooters can be used with power windows and locks, remote entry systems, stereo systems, alarms, and many more.
( 30 )
$19.00
—
$50.35
Dakota Digital offers replacement harnesses for use between their analog gauge control boxes and display/gauges. They're available in 3 ft. and 6 ft. lengths, in 8-pin or 6-pin styles. The harnesses are compatible with both RTX and HDX control boxes.
( 1 )
$9.45
—
$24.65
Dakota Digital HDX rocker switch assemblies mount below a dash or panel—or you can remove the old switch and install one of these HDX switch assemblies through the dash for the ultimate clean installation! These switch assemblies feature an optional push button for relocating SW1 and SW2 from your HDX gauge face to an alternate location. The HDX rocker switch assemblies have a momentary on/off switch and include wiring for installation. They are for specifically recommended for use with the HDX systems only; cannot be used on any other series. Note: Most HDX gauges have captive touch buttons in the gauge face that can be used, these assemblies are not required for operation of HDX gauges.
Not Yet Reviewed
$20.85
When you need to make automotive repairs or upgrades, Dakota Digital's selection of replacement wiring pigtails offer you the best fit and function to perform a variety of tasks. These quality-built, OE-like pigtails provide you with efficient, less costly repair options. Easily connect your gauges, sensors, and much more!
( 4 )
$38.00
Dakota Digital no-load LED turn signal flashers are intended for use in the replacement of original flasher modules when LED lighting is installed, or as heavy-duty flashers for factory or aftermarket incandescent lighting. These flasher modules will carry up to 25 amps of current, allowing for additional accessory or trailer lighting. To facilitate installation, the black wire coming out of the top of the module must be grounded. Attach the wire to a solid chassis ground, and the wire then may be extended as needed.
( 11 )
$45.60
The Dakota Digital BIM-12-2 Exhaust Gas Temp (EGT) and Cylinder Head Temp (CHT) interface module allows for up to two temperature inputs (i.e., 2 EGT or 2 CHT; or 1 EGT and 1 CHT readings). The BIM-12-2 supersedes the BIM-12-1. The BIM-12-2 will supply this information to the VHX, HDX, RTX and VFD3 systems with a black plastic control module. (For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness. Earlier instrument systems with an aluminum control module are not capable of BIM connectivity.)
Not Yet Reviewed
$123.50
Dakota Digital offers CDI ignition tachometer adapters, which can be used for any aftermarket tachometer being installed in a 1985-87 Buick Grand National with a CDI-type ignition system. These adapters are quality-assembled, and act as a "buffer" for the connection between the tachometer and your CDI ignition.
Not Yet Reviewed
$28.50
Modal Header